mbox series

[RFT,v2,00/48] drm/panel: Remove most store/double-check of prepared/enabled state

Message ID 20240503213441.177109-1-dianders@chromium.org (mailing list archive)
Headers show
Series drm/panel: Remove most store/double-check of prepared/enabled state | expand

Message

Doug Anderson May 3, 2024, 9:32 p.m. UTC
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

This series attempts to do just that. While the original grep, AKA:
  git grep 'if.*>prepared' -- drivers/gpu/drm/panel
  git grep 'if.*>enabled' -- drivers/gpu/drm/panel
...still produces a few hits after my series, they are _mostly_ all
gone. The ones that are left are less trivial to fix.

One of the main reasons that many panels probably needed to store and
double-check their prepared/enabled appears to have been to handle
shutdown and/or remove. Panels drivers often wanted to force the power
off for panels in these cases and this was a good reason for the
double-check.

In response to my V1 series [1] we had much discussion of what to
do. The conclusion was that as long as DRM modeset drivers properly
called drm_atomic_helper_shutdown() that we should be able to remove
the explicit shutdown/remove handling in the panel drivers. Most of
the patches to improve DRM modeset drivers [2] [3] [4] have now
landed.

In contrast to my V1 series, I broke the V2 series up a lot
more. Since a few of the panel drivers in V1 already landed, we had
fewer total drivers and so we could devote a patch to each panel.
Also, since we were now relying on DRM modeset drivers I felt like we
should split the patches for each panel into two: one that's
definitely safe and one that could be reverted if we found a
problematic DRM modeset driver that we couldn't fix.

Sorry for the large number of patches. I've set things to mostly just
CC people on the cover letter and the patches that are relevant to
them. I've tried to CC people on the whole series that have shown
interest in this TODO item.

As patches in this series are reviewed and/or tested they could be
landed. There's really no ordering requirement for the series unless
patches touch the same driver.

NOTE: this touches _a lot_ of drivers, is repetitive, and is not
really possible to generate automatically. That means it's entirely
possible that my eyes glazed over and I did something wrong. Please
double-check me and don't assume that I got everything perfect, though
I did my best. I have at least confirmed that "allmodconfig" for arm64
doesn't fall on its face with this series. I haven't done a ton of
other testing.

[1] https://lore.kernel.org/r/20230804140605.RFC.4.I930069a32baab6faf46d6b234f89613b5cec0f14@changeid
[2] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[4] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Changes in v2:
- ("drm/panel: raydium-rm692e5: Stop tracking prepared") new for v2.
- Only handle 1 panel per patch.
- Split removal of prepared/enabled from handling of remove/shutdown.
- panel-edp and panel-simple just get a comment now.

Douglas Anderson (48):
  drm/panel: raydium-rm692e5: Stop tracking prepared
  drm/panel: boe-himax8279d: Stop tracking prepared/enabled
  drm/panel: boe-himax8279d: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: boe-tv101wum-nl6: Stop tracking prepared
  drm/panel: boe-tv101wum-nl6: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: edp: Stop tracking prepared/enabled
  drm/panel: edp: Add a comment about unprepare+disable at
    shutdown/remove
  drm/panel: innolux-p079zca: Stop tracking prepared/enabled
  drm/panel: innolux-p079zca: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: khadas-ts050: Stop tracking prepared/enabled
  drm/panel: khadas-ts050: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: kingdisplay-kd097d04: Stop tracking prepared/enabled
  drm/panel: kingdisplay-kd097d04: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: ltk050h3146w: Stop tracking prepared
  drm/panel: ltk050h3146w: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: ltk500hd1829: Stop tracking prepared
  drm/panel: ltk500hd1829: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: novatek-nt36672a: Stop tracking prepared
  drm/panel: novatek-nt36672a: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: olimex-lcd-olinuxino: Stop tracking prepared/enabled
  drm/panel: olimex-lcd-olinuxino: Don't call unprepare+disable at
    remove
  drm/panel: osd-osd101t2587-53ts: Stop tracking prepared/enabled
  drm/panel: osd-osd101t2587-53ts: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: samsung-atna33xc20: Stop tracking prepared/enabled
  drm/panel: samsung-atna33xc20: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: simple: Stop tracking prepared/enabled
  drm/panel: simple: Add a comment about unprepare+disable at
    shutdown/remove
  drm/panel: tdo-tl070wsh30: Stop tracking prepared
  drm/panel: tdo-tl070wsh30: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: xinpeng-xpp055c272: Stop tracking prepared
  drm/panel: xinpeng-xpp055c272: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: jdi-lt070me05000: Stop tracking prepared/enabled
  drm/panel: jdi-lt070me05000: Don't call disable at shutdown/remove
  drm/panel: panasonic-vvx10f034n00: Stop tracking prepared/enabled
  drm/panel: panasonic-vvx10f034n00: Don't call disable at
    shutdown/remove
  drm/panel: seiko-43wvf1g: Stop tracking prepared/enabled
  drm/panel: seiko-43wvf1g: Don't call disable at shutdown/remove
  drm/panel: sharp-lq101r1sx01: Stop tracking prepared/enabled
  drm/panel: sharp-lq101r1sx01: Don't call disable at shutdown/remove
  drm/panel: sharp-ls043t1le01: Stop tracking prepared
  drm/panel: sharp-ls043t1le01: Don't call disable at shutdown/remove
  drm/panel: sitronix-st7703: Stop tracking prepared
  drm/panel: sitronix-st7703: Don't call disable at shutdown/remove
  drm/panel: raydium-rm67191: Stop tracking enabled
  drm/panel: raydium-rm67191: Don't call unprepare+disable at shutdown
  drm/panel: sony-acx565akm: Don't double-check enabled state in disable
  drm/panel: sony-acx565akm: Don't call disable at remove
  drm/panel: Update TODO list item for cleaning up prepared/enabled
    tracking

 Documentation/gpu/todo.rst                    | 47 +++++++-------
 drivers/gpu/drm/panel/panel-boe-himax8279d.c  | 40 ------------
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 23 -------
 drivers/gpu/drm/panel/panel-edp.c             | 60 +++++++-----------
 drivers/gpu/drm/panel/panel-innolux-p079zca.c | 55 ----------------
 .../gpu/drm/panel/panel-jdi-lt070me05000.c    | 35 -----------
 drivers/gpu/drm/panel/panel-khadas-ts050.c    | 39 ------------
 .../drm/panel/panel-kingdisplay-kd097d04.c    | 48 --------------
 .../drm/panel/panel-leadtek-ltk050h3146w.c    | 28 ---------
 .../drm/panel/panel-leadtek-ltk500hd1829.c    | 28 ---------
 .../gpu/drm/panel/panel-novatek-nt36672a.c    | 29 ---------
 .../drm/panel/panel-olimex-lcd-olinuxino.c    | 44 -------------
 .../drm/panel/panel-osd-osd101t2587-53ts.c    | 41 +-----------
 .../drm/panel/panel-panasonic-vvx10f034n00.c  | 47 +-------------
 drivers/gpu/drm/panel/panel-raydium-rm67191.c | 26 --------
 drivers/gpu/drm/panel/panel-raydium-rm692e5.c | 10 ---
 .../gpu/drm/panel/panel-samsung-atna33xc20.c  | 36 -----------
 drivers/gpu/drm/panel/panel-seiko-43wvf1g.c   | 49 ---------------
 .../gpu/drm/panel/panel-sharp-lq101r1sx01.c   | 63 +------------------
 .../gpu/drm/panel/panel-sharp-ls043t1le01.c   | 24 -------
 drivers/gpu/drm/panel/panel-simple.c          | 60 +++++++-----------
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 35 +++--------
 drivers/gpu/drm/panel/panel-sony-acx565akm.c  |  6 --
 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c  | 23 -------
 .../gpu/drm/panel/panel-xinpeng-xpp055c272.c  | 28 ---------
 25 files changed, 83 insertions(+), 841 deletions(-)

Comments

Linus Walleij May 6, 2024, 6:52 a.m. UTC | #1
On Fri, May 3, 2024 at 11:36 PM Douglas Anderson <dianders@chromium.org> wrote:

> As talked about in commit d2aacaf07395 ("drm/panel: Check for already
> prepared/enabled in drm_panel"), we want to remove needless code from
> panel drivers that was storing and double-checking the
> prepared/enabled state. Even if someone was relying on the
> double-check before, that double-check is now in the core and not
> needed in individual drivers.
>
> This series attempts to do just that. While the original grep, AKA:
>   git grep 'if.*>prepared' -- drivers/gpu/drm/panel
>   git grep 'if.*>enabled' -- drivers/gpu/drm/panel
> ...still produces a few hits after my series, they are _mostly_ all
> gone. The ones that are left are less trivial to fix.
>
> One of the main reasons that many panels probably needed to store and
> double-check their prepared/enabled appears to have been to handle
> shutdown and/or remove. Panels drivers often wanted to force the power
> off for panels in these cases and this was a good reason for the
> double-check.
>
> In response to my V1 series [1] we had much discussion of what to
> do. The conclusion was that as long as DRM modeset drivers properly
> called drm_atomic_helper_shutdown() that we should be able to remove
> the explicit shutdown/remove handling in the panel drivers. Most of
> the patches to improve DRM modeset drivers [2] [3] [4] have now
> landed.
>
> In contrast to my V1 series, I broke the V2 series up a lot
> more. Since a few of the panel drivers in V1 already landed, we had
> fewer total drivers and so we could devote a patch to each panel.
> Also, since we were now relying on DRM modeset drivers I felt like we
> should split the patches for each panel into two: one that's
> definitely safe and one that could be reverted if we found a
> problematic DRM modeset driver that we couldn't fix.
>
> Sorry for the large number of patches. I've set things to mostly just
> CC people on the cover letter and the patches that are relevant to
> them. I've tried to CC people on the whole series that have shown
> interest in this TODO item.
>
> As patches in this series are reviewed and/or tested they could be
> landed. There's really no ordering requirement for the series unless
> patches touch the same driver.
>
> NOTE: this touches _a lot_ of drivers, is repetitive, and is not
> really possible to generate automatically. That means it's entirely
> possible that my eyes glazed over and I did something wrong. Please
> double-check me and don't assume that I got everything perfect, though
> I did my best. I have at least confirmed that "allmodconfig" for arm64
> doesn't fall on its face with this series. I haven't done a ton of
> other testing.
>
> [1] https://lore.kernel.org/r/20230804140605.RFC.4.I930069a32baab6faf46d6b234f89613b5cec0f14@changeid
> [2] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
> [3] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
> [4] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

This is the right thing to do, thanks for looking into this!

As for the behaviour of .remove() I doubt whether in many cases
the original driver authors have even tested this themselves.
I would say we should just apply the series as soon as it's non-RFC
after the next merge window and see what happens. I doubt it
will cause much trouble.

The series:
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Ondřej Jirman May 6, 2024, 7:17 a.m. UTC | #2
On Mon, May 06, 2024 at 08:52:39AM GMT, Linus Walleij wrote:
> On Fri, May 3, 2024 at 11:36 PM Douglas Anderson <dianders@chromium.org> wrote:
> 
> > As talked about in commit d2aacaf07395 ("drm/panel: Check for already
> > prepared/enabled in drm_panel"), we want to remove needless code from
> > panel drivers that was storing and double-checking the
> > prepared/enabled state. Even if someone was relying on the
> > double-check before, that double-check is now in the core and not
> > needed in individual drivers.
> >
> > This series attempts to do just that. While the original grep, AKA:
> >   git grep 'if.*>prepared' -- drivers/gpu/drm/panel
> >   git grep 'if.*>enabled' -- drivers/gpu/drm/panel
> > ...still produces a few hits after my series, they are _mostly_ all
> > gone. The ones that are left are less trivial to fix.
> >
> > One of the main reasons that many panels probably needed to store and
> > double-check their prepared/enabled appears to have been to handle
> > shutdown and/or remove. Panels drivers often wanted to force the power
> > off for panels in these cases and this was a good reason for the
> > double-check.
> >
> > In response to my V1 series [1] we had much discussion of what to
> > do. The conclusion was that as long as DRM modeset drivers properly
> > called drm_atomic_helper_shutdown() that we should be able to remove
> > the explicit shutdown/remove handling in the panel drivers. Most of
> > the patches to improve DRM modeset drivers [2] [3] [4] have now
> > landed.
> >
> > In contrast to my V1 series, I broke the V2 series up a lot
> > more. Since a few of the panel drivers in V1 already landed, we had
> > fewer total drivers and so we could devote a patch to each panel.
> > Also, since we were now relying on DRM modeset drivers I felt like we
> > should split the patches for each panel into two: one that's
> > definitely safe and one that could be reverted if we found a
> > problematic DRM modeset driver that we couldn't fix.
> >
> > Sorry for the large number of patches. I've set things to mostly just
> > CC people on the cover letter and the patches that are relevant to
> > them. I've tried to CC people on the whole series that have shown
> > interest in this TODO item.
> >
> > As patches in this series are reviewed and/or tested they could be
> > landed. There's really no ordering requirement for the series unless
> > patches touch the same driver.
> >
> > NOTE: this touches _a lot_ of drivers, is repetitive, and is not
> > really possible to generate automatically. That means it's entirely
> > possible that my eyes glazed over and I did something wrong. Please
> > double-check me and don't assume that I got everything perfect, though
> > I did my best. I have at least confirmed that "allmodconfig" for arm64
> > doesn't fall on its face with this series. I haven't done a ton of
> > other testing.
> >
> > [1] https://lore.kernel.org/r/20230804140605.RFC.4.I930069a32baab6faf46d6b234f89613b5cec0f14@changeid
> > [2] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
> > [3] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
> > [4] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org
> 
> This is the right thing to do, thanks for looking into this!
> 
> As for the behaviour of .remove() I doubt whether in many cases
> the original driver authors have even tested this themselves.
> I would say we should just apply the series as soon as it's non-RFC
> after the next merge window and see what happens. I doubt it
> will cause much trouble.

In the case of st7703 driver, yes tested, and proper shutdown of the panel is
necessary, because lack of it can lead to otherwise inexplainable blinking of
the entire screen, when the panel is quickly powered up and re-initialized again
(eg. as happens when bootloader has display support). Blinking then only ever
stops if the panel is left completely powered off for several minutes.

There's a note about this in the controller datasheet, that proper power off
is needed to enable dicharge of the panel.

Kind regards,
	o.

> The series:
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Yours,
> Linus Walleij
Maxime Ripard May 6, 2024, 7:27 a.m. UTC | #3
On Fri, 3 May 2024 14:32:41 -0700, Douglas Anderson wrote:
> 
> As talked about in commit d2aacaf07395 ("drm/panel: Check for already
> prepared/enabled in drm_panel"), we want to remove needless code from
> panel drivers that was storing and double-checking the
> prepared/enabled state. Even if someone was relying on the
> 
> [ ... ]

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime
Doug Anderson May 8, 2024, 9:14 p.m. UTC | #4
Hi,

On Sun, May 5, 2024 at 11:52 PM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> On Fri, May 3, 2024 at 11:36 PM Douglas Anderson <dianders@chromium.org> wrote:
>
> > As talked about in commit d2aacaf07395 ("drm/panel: Check for already
> > prepared/enabled in drm_panel"), we want to remove needless code from
> > panel drivers that was storing and double-checking the
> > prepared/enabled state. Even if someone was relying on the
> > double-check before, that double-check is now in the core and not
> > needed in individual drivers.
> >
> > This series attempts to do just that. While the original grep, AKA:
> >   git grep 'if.*>prepared' -- drivers/gpu/drm/panel
> >   git grep 'if.*>enabled' -- drivers/gpu/drm/panel
> > ...still produces a few hits after my series, they are _mostly_ all
> > gone. The ones that are left are less trivial to fix.
> >
> > One of the main reasons that many panels probably needed to store and
> > double-check their prepared/enabled appears to have been to handle
> > shutdown and/or remove. Panels drivers often wanted to force the power
> > off for panels in these cases and this was a good reason for the
> > double-check.
> >
> > In response to my V1 series [1] we had much discussion of what to
> > do. The conclusion was that as long as DRM modeset drivers properly
> > called drm_atomic_helper_shutdown() that we should be able to remove
> > the explicit shutdown/remove handling in the panel drivers. Most of
> > the patches to improve DRM modeset drivers [2] [3] [4] have now
> > landed.
> >
> > In contrast to my V1 series, I broke the V2 series up a lot
> > more. Since a few of the panel drivers in V1 already landed, we had
> > fewer total drivers and so we could devote a patch to each panel.
> > Also, since we were now relying on DRM modeset drivers I felt like we
> > should split the patches for each panel into two: one that's
> > definitely safe and one that could be reverted if we found a
> > problematic DRM modeset driver that we couldn't fix.
> >
> > Sorry for the large number of patches. I've set things to mostly just
> > CC people on the cover letter and the patches that are relevant to
> > them. I've tried to CC people on the whole series that have shown
> > interest in this TODO item.
> >
> > As patches in this series are reviewed and/or tested they could be
> > landed. There's really no ordering requirement for the series unless
> > patches touch the same driver.
> >
> > NOTE: this touches _a lot_ of drivers, is repetitive, and is not
> > really possible to generate automatically. That means it's entirely
> > possible that my eyes glazed over and I did something wrong. Please
> > double-check me and don't assume that I got everything perfect, though
> > I did my best. I have at least confirmed that "allmodconfig" for arm64
> > doesn't fall on its face with this series. I haven't done a ton of
> > other testing.
> >
> > [1] https://lore.kernel.org/r/20230804140605.RFC.4.I930069a32baab6faf46d6b234f89613b5cec0f14@changeid
> > [2] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
> > [3] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
> > [4] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org
>
> This is the right thing to do, thanks for looking into this!
>
> As for the behaviour of .remove() I doubt whether in many cases
> the original driver authors have even tested this themselves.

Yeah, I'd tend to agree.


> I would say we should just apply the series as soon as it's non-RFC

It's not actually RFC now, but "RFT" (request for testing). I don't
_think_ there's any need to send a version without the RFT tag before
landing unless someone really feels strongly about it.


> after the next merge window

With drm-misc there's not really any specific reason to wait for the
merge window to open/close as we can land in drm-misc-next at any time
regardless of the merge window. drm-misc-next will simply stop feeding
linuxnext for a while.

That all being said, I'm happy to delay landing this until after the
next -rc1 comes out if people would prefer that. If I don't hear
anything, I guess I'll just wait until -rc1 before landing any of
these.


> and see what happens. I doubt it
> will cause much trouble.

I can land the whole series if that's what everyone agrees on. As I
mentioned above, I'm at least slightly worried that I did something
stupid _somewhere_ in this series since no automation was possible and
with repetitive tasks like this it's super easy to flub something up.
It's _probably_ fine, but I guess I still have the worry in the back
of my mind.

If folks think I should just apply the whole series then I'm happy to
do that. If folks think I should just land parts of the series as they
are reviewed/tested I can do that as well. Let me know. If I don't
hear anything I'd tend to just land patches that are reviewed/tested.
Then after a month or so (hopefully) I'd send out a v2 with anything
left.


> The series:
> Acked-by: Linus Walleij <linus.walleij@linaro.org>

Thanks!

-Doug
Doug Anderson May 28, 2024, 8:14 p.m. UTC | #5
Hi,

On Wed, May 8, 2024 at 2:14 PM Doug Anderson <dianders@chromium.org> wrote:
>
> > This is the right thing to do, thanks for looking into this!
> >
> > As for the behaviour of .remove() I doubt whether in many cases
> > the original driver authors have even tested this themselves.
>
> Yeah, I'd tend to agree.
>
>
> > I would say we should just apply the series as soon as it's non-RFC
>
> It's not actually RFC now, but "RFT" (request for testing). I don't
> _think_ there's any need to send a version without the RFT tag before
> landing unless someone really feels strongly about it.
>
>
> > after the next merge window
>
> With drm-misc there's not really any specific reason to wait for the
> merge window to open/close as we can land in drm-misc-next at any time
> regardless of the merge window. drm-misc-next will simply stop feeding
> linuxnext for a while.
>
> That all being said, I'm happy to delay landing this until after the
> next -rc1 comes out if people would prefer that. If I don't hear
> anything, I guess I'll just wait until -rc1 before landing any of
> these.
>
>
> > and see what happens. I doubt it
> > will cause much trouble.
>
> I can land the whole series if that's what everyone agrees on. As I
> mentioned above, I'm at least slightly worried that I did something
> stupid _somewhere_ in this series since no automation was possible and
> with repetitive tasks like this it's super easy to flub something up.
> It's _probably_ fine, but I guess I still have the worry in the back
> of my mind.
>
> If folks think I should just apply the whole series then I'm happy to
> do that. If folks think I should just land parts of the series as they
> are reviewed/tested I can do that as well. Let me know. If I don't
> hear anything I'd tend to just land patches that are reviewed/tested.
> Then after a month or so (hopefully) I'd send out a v2 with anything
> left.

Nobody said anything, so I did what I indicated above:

1. I've applied all patches that someone responded to with Linus +
Maxime's Acks + any given tags. This includes the st7703 panels which
Ondřej replied to the cover letter about but didn't officially get any
tags.

2. I also applied patches for panels that I was personally involved
with. This includes panel-edp, panel-simple, samsung-atna33xc20,
boe-tv101wum-nl6.

Anything totally unresponded to I've left unapplied. I'll wait a
little while (at least a week) and then plan to send a v2 with
anything still outstanding. If someone sends Tested-by/Reviewed-by for
some panels in the meantime I'll apply them.

Here are the 25 patches applied to drm-misc-next:

[01/48] drm/panel: raydium-rm692e5: Stop tracking prepared
        commit: 598dc42f25cc3060fd350db0f52af1075af3f500

[04/48] drm/panel: boe-tv101wum-nl6: Stop tracking prepared
        commit: 3c24e31c908eb12e99420ff33b74c01f045253fe
[05/48] drm/panel: boe-tv101wum-nl6: Don't call unprepare+disable at
shutdown/remove
        commit: 1985e3512b5a3777f6a18c36e40f3926037120bb
[06/48] drm/panel: edp: Stop tracking prepared/enabled
        commit: 3904f317fd977533f6d7d3c4bfd75e0ac6169bb7
[07/48] drm/panel: edp: Add a comment about unprepare+disable at shutdown/remove
        commit: ec7629859331fb67dbfb6bcd47f887a402e390ff
[08/48] drm/panel: innolux-p079zca: Stop tracking prepared/enabled
        commit: f9055051292442d52092f17e191cf0a58d23d4ed
[09/48] drm/panel: innolux-p079zca: Don't call unprepare+disable at
shutdown/remove
        commit: eeb133ff78476eb1e6e88154dfb75a741e8a034a

[12/48] drm/panel: kingdisplay-kd097d04: Stop tracking prepared/enabled
        commit: 157c1381780a453e06430f8b35bb8c5d439eb8c6
[13/48] drm/panel: kingdisplay-kd097d04: Don't call unprepare+disable
at shutdown/remove
        commit: 68c205ef3c39edce4a3346b8a53fd2b700394a0c
[14/48] drm/panel: ltk050h3146w: Stop tracking prepared
        commit: f124478dd18c519544489caddce78e7c5796a758
[15/48] drm/panel: ltk050h3146w: Don't call unprepare+disable at shutdown/remove
        commit: b7ca446ecb53205944968617b158f073bcacaedc
[16/48] drm/panel: ltk500hd1829: Stop tracking prepared
        commit: 2b8c19b9d7bc9d03e8c44bd391d21e95c07a2c83
[17/48] drm/panel: ltk500hd1829: Don't call unprepare+disable at shutdown/remove
        commit: 3357f6f465e62c0bc5e906365063734740c9f6d4
[18/48] drm/panel: novatek-nt36672a: Stop tracking prepared
        commit: b605f257f386b7f4b6fc9c0f82b86b75d0579287
[19/48] drm/panel: novatek-nt36672a: Don't call unprepare+disable at
shutdown/remove
        commit: 2a9487b5aa55753993fde80e4841128c8da4df71

[24/48] drm/panel: samsung-atna33xc20: Stop tracking prepared/enabled
        commit: 5a847750aac8454a1604070ab99d689c0a6e4290
[25/48] drm/panel: samsung-atna33xc20: Don't call unprepare+disable at
shutdown/remove
        commit: 49869668ff0e3f380858b4c20b8d0cb02b933f48
[26/48] drm/panel: simple: Stop tracking prepared/enabled
        commit: 2a1c99d7159b798288bfb20a76c1e665e2344126
[27/48] drm/panel: simple: Add a comment about unprepare+disable at
shutdown/remove
        commit: bc62654df3c888dec735343f5db9907ac93aea60

[30/48] drm/panel: xinpeng-xpp055c272: Stop tracking prepared
        commit: 4e5e6fa77a9d40cdf85ade7f86d07dc8929941c9
[31/48] drm/panel: xinpeng-xpp055c272: Don't call unprepare+disable at
shutdown/remove
        commit: ac9e1786271f771ff1f774742602330be2d57a12

[42/48] drm/panel: sitronix-st7703: Stop tracking prepared
        commit: 3004d2e9cca5d59d25dff670a03a005d40601ded
[43/48] drm/panel: sitronix-st7703: Don't call disable at shutdown/remove
        commit: 718bd8a1a5ee873778a72523c06da054a89108b4

[46/48] drm/panel: sony-acx565akm: Don't double-check enabled state in disable
        commit: e28df86aeeff0b84c13e676f641ea879abbdb809
[47/48] drm/panel: sony-acx565akm: Don't call disable at remove
        commit: 6afebd850d1ab5518c273b32532f0b2086cc633a


-Doug