mbox series

[v6,0/2] arm64: dts: rockchip: Add Radxa ZERO 3W/3E

Message ID 20240521202810.1225636-1-jonas@kwiboo.se (mailing list archive)
Headers show
Series arm64: dts: rockchip: Add Radxa ZERO 3W/3E | expand

Message

Jonas Karlman May 21, 2024, 8:28 p.m. UTC 
This series adds initial support for the Radxa ZERO 3W/3E boards.

The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
computer based on the Rockchip RK3566, with a compact form factor and
rich interfaces.

Schematic for ZERO 3W and ZERO 3E can be found at:
https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_schematic.pdf
https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_v1200_schematic.pdf

Changes in v2:
- Collect acked-by tag
- Add to Makefile
- Add patch to fix #sound-dai-cells warning

Changes in v3:
- Fix devicetree spelling
- Sort hdmi-con, leds, pmic@20 and regulator@40 nodes
- Change to regulator-off-in-suspend for vdd_logic
- Drop patch to fix #sound-dai-cells warning, similar patch [1] already
  exists

Changes in v4:
- Change compatible of vdd_logic
- Add vcc5v_midu and vbus regulator and related vcc8/vcc9-supply prop
- Adjust clock_in_out prop for gmac1
- Add cap-mmc-highspeed prop to sdhci
- Add sdmmc1 and uart1 nodes used for wifi/bt on 3W
- Rename rk3566-radxa-zero3.dtsi to rk3566-radxa-zero-3.dtsi
- Rebase on latest mmind/for-next tree

Changes in v5:
- Rename regulator-fixed nodes
- Add keep-power-in-suspend to sdmmc1 node
- Add uart-has-rtscts to uart1 node

Changes in v6:
- Use imperative wording in commit message 
- Move led-green pinctrl props to gpio-leds node
- Add pinctrl props to ethernet-phy node
- Add no-mmc/no-sd/no-sdio props to sdhci/sdmmc0 nodes

[1] https://lore.kernel.org/linux-rockchip/3a035c16-75b5-471d-aa9d-e91c2bb9f8d0@gmail.com/

Jonas Karlman (2):
  dt-bindings: arm: rockchip: Add Radxa ZERO 3W/3E
  arm64: dts: rockchip: Add Radxa ZERO 3W/3E

 .../devicetree/bindings/arm/rockchip.yaml     |   7 +
 arch/arm64/boot/dts/rockchip/Makefile         |   2 +
 .../dts/rockchip/rk3566-radxa-zero-3.dtsi     | 463 ++++++++++++++++++
 .../dts/rockchip/rk3566-radxa-zero-3e.dts     |  51 ++
 .../dts/rockchip/rk3566-radxa-zero-3w.dts     |  91 ++++
 5 files changed, 614 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts

Comments

Heiko Stuebner May 27, 2024, 10:42 p.m. UTC | #1 
On Tue, 21 May 2024 20:28:03 +0000, Jonas Karlman wrote:
> This series adds initial support for the Radxa ZERO 3W/3E boards.
> 
> The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
> computer based on the Rockchip RK3566, with a compact form factor and
> rich interfaces.
> 
> Schematic for ZERO 3W and ZERO 3E can be found at:
> https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_schematic.pdf
> https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_v1200_schematic.pdf
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: rockchip: Add Radxa ZERO 3W/3E
      commit: ad986e45ada999d67bb47ec8a0316fc931927c21
[2/2] arm64: dts: rockchip: Add Radxa ZERO 3W/3E
      commit: 1a5c8d307c83c808a32686ed51afb4bac2092d39

Best regards,