[v3,00/13] ARM: dts: kontron-samx6i: various fixes

Message

Michael Walle June 17, 2024, 9:13 a.m. UTC

While working on a new PHY support for this board I've noticed quite
a few errors. Fix these and introduce an actual board for the
module. For now, there was just a dtsi and no actual user of it.

v3:
 - fix typos and property order. Thanks Shawn.

v2:
 - new patch to fix the node names to make the schema happy
 - new patch to fix the PCIe reset line polarity
 - new patch to remove the unused and invalid wake-up-gpio property
 - add required poperties for the supply voltages to the wm8904 node
 - enable PCIe in the ADS2 device tree include

Michael Walle (13):
  ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode
  ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset
  ARM: dts: imx6qdl-kontron-samx6i: fix board reset
  ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node
  ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects
  ARM: dts: imx6qdl-kontron-samx6i: fix product name
  ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC
  ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support
  ARM: dts: imx6qdl-kontron-samx6i: fix node names
  ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity
  ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property
  dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards
  ARM: dts: imx6qdl-kontron-samx6i: add actual device trees

 .../devicetree/bindings/arm/fsl.yaml          |  12 ++
 arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
 .../nxp/imx/imx6dl-kontron-samx6i-ads2.dts    |  12 ++
 .../dts/nxp/imx/imx6dl-kontron-samx6i.dtsi    |   2 +-
 .../dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts |  12 ++
 .../dts/nxp/imx/imx6q-kontron-samx6i.dtsi     |  25 +--
 .../nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi  | 148 ++++++++++++++++++
 .../dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi   |  58 ++++---
 8 files changed, 225 insertions(+), 46 deletions(-)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi

Comments

Shawn Guo June 27, 2024, 7:25 a.m. UTC | #1

On Mon, Jun 17, 2024 at 11:13:28AM +0200, Michael Walle wrote:
> While working on a new PHY support for this board I've noticed quite
> a few errors. Fix these and introduce an actual board for the
> module. For now, there was just a dtsi and no actual user of it.
> 
> v3:
>  - fix typos and property order. Thanks Shawn.
> 
> v2:
>  - new patch to fix the node names to make the schema happy
>  - new patch to fix the PCIe reset line polarity
>  - new patch to remove the unused and invalid wake-up-gpio property
>  - add required poperties for the supply voltages to the wm8904 node
>  - enable PCIe in the ADS2 device tree include
> 
> Michael Walle (13):
>   ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode
>   ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset
>   ARM: dts: imx6qdl-kontron-samx6i: fix board reset
>   ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node
>   ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects
>   ARM: dts: imx6qdl-kontron-samx6i: fix product name
>   ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC
>   ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support
>   ARM: dts: imx6qdl-kontron-samx6i: fix node names
>   ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity
>   ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property
>   dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards
>   ARM: dts: imx6qdl-kontron-samx6i: add actual device trees

Applied all, thanks!