mbox series

[0/3] arm64: dts: ti: k3-am62p/j722s: Add gpio-ranges properties

Message ID 20240618173123.2592074-1-nm@ti.com (mailing list archive)
Headers show
Series arm64: dts: ti: k3-am62p/j722s: Add gpio-ranges properties | expand

Message

Nishanth Menon June 18, 2024, 5:31 p.m. UTC
Hi,

This series was tested on BeagleY-AI[1] using the script[2].

This allows gpiod to request for a gpio that is not in the default GPIO
mux mode and the framework controls the mux over to required GPIO mode.

The series is based off next-20240617.

NOTE: there is also a dtb_warning that is added, which as far as I can
see is either a dtschema bug or a pinctrl-single binding error. more
information in [3]

Jared McArthur (1):
  arm64: dts: ti: k3-j722s: Add gpio-ranges properties

Nishanth Menon (2):
  arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode
  arm64: dts: ti: k3-am62p: Add gpio-ranges properties

 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 14 ++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi  | 10 ++++++++++
 arch/arm64/boot/dts/ti/k3-j722s.dtsi      | 17 +++++++++++++++++
 arch/arm64/boot/dts/ti/k3-pinctrl.h       |  2 ++
 4 files changed, 43 insertions(+)


base-commit: 76db4c64526c5e8ba0f56ad3d890dce8f9b00bbc
[1] https://www.beagleboard.org/boards/beagley-ai
[2] https://gist.github.com/nmenon/4973770cf0df3f02c2e4f7f3d048d80d
[3] https://lore.kernel.org/r/20240618165102.2380159-1-nm@ti.com