mbox series

[v4,0/2] Add support for Kontron OSM-S i.MX93 SoM and carrier board

Message ID 20240806160353.823785-1-frieder@fris.de (mailing list archive)
Headers show
Series Add support for Kontron OSM-S i.MX93 SoM and carrier board | expand

Message

Frieder Schrempf Aug. 6, 2024, 4:02 p.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

Patch 1: board DT bindings
Patch 2: add devicetrees

Changes for v4:
* Reorder enable-active-high property
* Add dedicated pinctrl settings for different SDHC speed modes
* Add SION bit for SDHC pinctrls as workaround for SoC erratum

Changes for v3:
* remove applied patches
* rebase onto v6.11-rc1

Changes for v2:
* remove applied patches 1 and 2
* add tags
* improvements suggested by Krzysztof (thanks!)
* add missing Makefile entry for DT

Frieder Schrempf (2):
  dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards
  arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier
    board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-kontron-bl-osm-s.dts  | 165 +++++
 .../dts/freescale/imx93-kontron-osm-s.dtsi    | 628 ++++++++++++++++++
 4 files changed, 800 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi