mbox series

[0/9] ARM: dts: st: add WLAN/BT on disco boards

Message ID 20240827140455.345086-1-valentin.caron@foss.st.com (mailing list archive)
Headers show
Series ARM: dts: st: add WLAN/BT on disco boards | expand

Message

Valentin Caron Aug. 27, 2024, 2:04 p.m. UTC
This series enable WLAN/BT module on stm32mp1x discovery boards.
Use LSCO from RTC to supply 32kHz clock to WLAN/BT modules.
This is done by selecting "rtc_lsco_pins_a" in the WLAN pinctrl node.

And also add RTC nodes on stm32mp25x to enable RTC on stm32mp257f-ev1
board.

Christophe Roullier (2):
  ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
  ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk

Valentin Caron (7):
  ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
  ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13
  ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2
  ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk
  arm64: dts: st: add RTC on stm32mp25x
  arm64: dts: st: enable RTC on stm32mp257f-ev1 board
  ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp25

 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi   |  7 +++
 arch/arm/boot/dts/st/stm32mp135f-dk.dts       | 52 +++++++++++++++++++
 arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi   |  7 +++
 arch/arm/boot/dts/st/stm32mp157c-dk2.dts      | 51 +++++++++++++++++-
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi |  6 +++
 arch/arm64/boot/dts/st/stm32mp251.dtsi        | 10 ++++
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts    |  4 ++
 7 files changed, 136 insertions(+), 1 deletion(-)