mbox series

[v2,0/5] arm64: dts: imx8-apalis: Various improvements and additions

Message ID 20240903091231.20035-1-francesco@dolcini.it (mailing list archive)
Headers show
Series arm64: dts: imx8-apalis: Various improvements and additions | expand

Message

Francesco Dolcini Sept. 3, 2024, 9:12 a.m. UTC 
From: Francesco Dolcini <francesco.dolcini@toradex.com>

This series improves Toradex Apalis iMX8Q support adding:
 - correct thermal zones
 - analogue audio
 - USB Host (Apalis USBH4 interface)

In addition to these it also removes the adma_pwm from the i.MX8QM SoC dtsi, as
this IP is not available on this specific SoC.

v2:
 - Keep I2C nodes sorted by address

v1: https://lore.kernel.org/all/20240826221541.15669-1-francesco@dolcini.it/

Andrejs Cainikovs (2):
  arm: dts: imx8qm: Remove adma pwm
  arm64: dts: imx8-apalis: Set thermal thresholds

Hiago De Franco (1):
  arm64: dts: imx8-apalis: Add nau8822 audio-codec to apalis eval v1.2

João Paulo Gonçalves (2):
  arm64: dts: imx8-apalis: Add audio support
  arm64: dts: imx8-apalis: Add usb4 host support

 .../dts/freescale/imx8-apalis-eval-v1.2.dtsi  |  69 +++++++++
 .../boot/dts/freescale/imx8-apalis-eval.dtsi  |  31 +++-
 .../dts/freescale/imx8-apalis-ixora-v1.1.dtsi |  31 +++-
 .../dts/freescale/imx8-apalis-ixora-v1.2.dtsi |  31 +++-
 .../boot/dts/freescale/imx8-apalis-v1.1.dtsi  | 135 ++++++++++++++++--
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |   3 +
 6 files changed, 273 insertions(+), 27 deletions(-)