| Message ID | 20240914095456.2347532-1-damon.ding@rock-chips.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for RK3588S Evaluation board | expand |
On Sat, 14 Sep 2024 17:54:54 +0800, Damon Ding wrote: > RK3588S EVB1 board features: > - Rockchip RK3588S > - PMIC: RK806-2x2pcs+DiscretePower > - RAM: LPDDR4/4x 2pcsx 32bit > - ROM: eMMC5.1+ SPI Falsh > > Damon Ding (2): > dt-bindings: arm: rockchip: Add RK3588S EVB1 board > arm64: dts: rockchip: Add RK3588S EVB1 board > > [...] Applied, thanks! [1/2] dt-bindings: arm: rockchip: Add RK3588S EVB1 board commit: fab49faebdfb0c3cdec6c70334e52f65343d130c [2/2] arm64: dts: rockchip: Add RK3588S EVB1 board commit: 00c7fb3b8ab25c496931686860a09994c93c76e6 Best regards,
RK3588S EVB1 board features: - Rockchip RK3588S - PMIC: RK806-2x2pcs+DiscretePower - RAM: LPDDR4/4x 2pcsx 32bit - ROM: eMMC5.1+ SPI Falsh Damon Ding (2): dt-bindings: arm: rockchip: Add RK3588S EVB1 board arm64: dts: rockchip: Add RK3588S EVB1 board Changes in v2: - rename amplifier nodes to amplifier-headphone and amplifier-speaker - sort audio and backlight nodes by node name - format names of regulator nodes to regulator-* - add CPU/memory regulator coupling - fix "VOP-" to "VOL-" in commit message - remove bootargs property in chosen node Changes in v3: - remove unevaluated properties: pcie@fe190000: 'rockchip,skip-scan-in-resume' pmic@1: regulators: dcdc-reg*: 'regulator-init-microvolt' phy@fed80000: 'svid' Changes in v4: - remove unexpected property bootargs which added by mistake in v3 - add cd-gpios property in sdmmc node - enable combphy2_psu for pcie2x1l1 - improve commit messages - add proper series title Changes in v5: - fix the simple-audio-card,hp-det-gpio to gpio1_d0 in analog-sound node - replace gpio property with gpios in regulator nodes - move status property after pinctrl-0 in i2c8 node - remove status property in usbc0 node - fix interrupts pin to gpio0_c4 in hym8563 node - sort properties alphabetically in sdmmc node - use RK_PA7 instead of 7 in pmic nodes - move pinctrl-name after pinctrl-0 in pmic@1 node - add pinctrl-name in uart2 node - remove dr_mode property in usb_host0_xhci node .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 1128 +++++++++++++++++ 3 files changed, 1134 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts