mbox series

[0/5] Add power monitor support on Microchip boards

Message ID 20240923064932.5797-1-mihai.sain@microchip.com (mailing list archive)
Headers show
Series Add power monitor support on Microchip boards | expand

Message

Mihai Sain Sept. 23, 2024, 6:49 a.m. UTC 
This patch series adds power monitor support using PAC1934 on Microchip boards.

[root@sama7g5 ~]$ lsiio
Device 001: pac1934
Device 000: e1000000.adc

[root@sama7g5 ~]$ awk -f pac1934.awk
VDD3V3 current: 161.747 mA, voltage: 3300.29 mV
VDDIODDR current: 72.616 mA, voltage: 1346.68 mV
VDDCORE current: 249.84 mA, voltage: 1204.59 mV
VDDCPU current: 68.4628 mA, voltage: 1301.27 mV

Mihai Sain (5):
  ARM: dts: microchip: sam9x60ek: Add power monitor support
  ARM: dts: microchip: sama5d2_icp: Add power monitor support
  ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
  ARM: dts: microchip: sama7g5ek: Add power monitor support
  ARM: configs: at91: enable PAC1934 driver as module

 .../arm/boot/dts/microchip/at91-sam9x60ek.dts | 31 +++++++++++++++++++
 .../boot/dts/microchip/at91-sama5d2_icp.dts   | 31 +++++++++++++++++++
 .../dts/microchip/at91-sama7g54_curiosity.dts | 31 +++++++++++++++++++
 .../arm/boot/dts/microchip/at91-sama7g5ek.dts | 31 +++++++++++++++++++
 arch/arm/configs/at91_dt_defconfig            |  1 +
 arch/arm/configs/sama5_defconfig              |  1 +
 arch/arm/configs/sama7_defconfig              |  1 +
 7 files changed, 127 insertions(+)


base-commit: de5cb0dcb74c294ec527eddfe5094acfdb21ff21

Comments

Claudiu Beznea Oct. 20, 2024, 3:35 p.m. UTC | #1 
On 23.09.2024 09:49, Mihai Sain wrote:
> Mihai Sain (5):
>   ARM: dts: microchip: sam9x60ek: Add power monitor support
>   ARM: dts: microchip: sama5d2_icp: Add power monitor support
>   ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
>   ARM: dts: microchip: sama7g5ek: Add power monitor support
>   ARM: configs: at91: enable PAC1934 driver as module

Applied to at91-dt, thanks!