mbox series

[v2,0/3] spi-nor: add optional vcc-supply and enable it for i.MX93

Message ID 20240930-spi-v2-0-ed7f6bcbe0df@nxp.com (mailing list archive)
Headers show
Series spi-nor: add optional vcc-supply and enable it for i.MX93 | expand

Message

Peng Fan (OSS) Sept. 30, 2024, 9:22 a.m. UTC 
spi-nor flash needs power supply to work properly, the power supply
could be software controlled. So need enable the power before using the
flash.

Patch 1,2 is to add vcc-supply for spi-nor
Patch 3 is to add overlays for i.MX93-11x11-EVK

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Changes in v2:
- Add A-b for patch 1, typo in patch 1
- Use devm_regulator_get_enable in patch 2
  I still keep it in spi_nor_scan because it is in probe stage.
- Link to v1: https://lore.kernel.org/r/20240920-spi-v1-0-97f220c2e10c@nxp.com

---
Peng Fan (3):
      dt-bindings: mtd: jedec,spi-nor: add optional vcc-supply
      mtd: spi-nor: support vcc-supply regulator
      arm64: dts: imx93-11x11-evk: add overlays for flexspi flash

 .../devicetree/bindings/mtd/jedec,spi-nor.yaml     |  4 ++
 arch/arm64/boot/dts/freescale/Makefile             |  3 ++
 .../dts/freescale/imx93-11x11-evk-flexspi-m2.dtso  | 59 ++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts  | 10 ++++
 drivers/mtd/spi-nor/core.c                         |  5 ++
 5 files changed, 81 insertions(+)
---
base-commit: 1dfc4eba4ed353d2c6b26acc0f3518d3eecf28c3
change-id: 20240920-spi-34231ea74761

Best regards,