[v5,0/5] Add mfd, pinctrl and pwm support to EN7581 SoC

Message

Lorenzo Bianconi Oct. 1, 2024, 5:29 p.m. UTC

Introduce airoha-mfd driver in order to load pinctrl and pwm drivers for
EN7581 SoC. airoha-mfd is needed since both pinctrl and pwm drivers
needs to access the same memory block (gpio memory region) to configure
{gio,irq}_chip and pwm functionalities respectively, so model them as
childs of a parent mfd driver.
Current EN7581 pinctrl driver supports the following functionalities:
- pin multiplexing via chip_scu syscon
- pin pull-up, pull-down, open-drain, current strength,
  {input,output}_enable, output_{low,high} via chip_scu syscon
- gpio controller
- irq controller

---
Changes in v5:
- use spin_lock in airoha_pinctrl_rmw instead of a mutex since it can run
  in interrupt context
- remove unused includes in pinctrl driver
- since the irq_chip is immutable, allocate the gpio_irq_chip struct
  statically in pinctrl driver
- rely on regmap APIs in pinctrl driver but keep the spin_lock local to the
  driver
- rely on guard/guard_scope APIs in pinctrl driver
- improve naming convention pinctrl driver
- introduce airoha_pinconf_set_pin_value utility routine
- Link to v4: https://lore.kernel.org/r/[e-mail]

Changes in v4:
- add 'Limitation' description in pwm driver
- fix comments in pwm driver
- rely on mfd->base __iomem pointer in pwm driver, modify register
  offsets according to it and get rid of sgpio_cfg, flash_cfg and
  cycle_cfg pointers
- simplify register utility routines in pwm driver
- use 'generator' instead of 'waveform' suffix for pwm routines
- fix possible overflow calculating duty cycle in pwm driver
- do not modify pwm state in free callback in pwm driver
- cap the maximum period in pwm driver
- do not allow inverse polarity in pwm driver
- do not set of_xlate callback in the pwm driver and allow the stack to
  do it
- fix MAINTAINERS file for airoha pinctrl driver
- fix undefined reference to __ffsdi2 in pinctrl driver
- simplify airoha,en7581-gpio-sysctl.yam binding
- Link to v3: https://lore.kernel.org/r/[e-mail]

Changes in v3:
- introduce airoha-mfd driver
- add pwm driver to the same series
- model pinctrl and pwm drivers as childs of a parent mfd driver.
- access chip-scu memory region in pinctrl driver via syscon
- introduce a single airoha,en7581-gpio-sysctl.yaml binding and get rid
  of dedicated bindings for pinctrl and pwm
- add airoha,en7581-chip-scu.yaml binding do the series
- Link to v2: https://lore.kernel.org/r/[e-mail]

Changes in v2:
- Fix compilation errors
- Collapse some register mappings for gpio and irq controllers
- update dt-bindings according to new register mapping
- fix some dt-bindings errors
- Link to v1: https://lore.kernel.org/all/[e-mail]/

---
Benjamin Larsson (1):
      pwm: airoha: Add support for EN7581 SoC

Christian Marangi (2):
      dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller
      mfd: airoha: Add support for Airoha EN7581 MFD

Lorenzo Bianconi (2):
      dt-bindings: arm: airoha: Add the chip-scu node for EN7581 SoC
      pinctrl: airoha: Add support for EN7581 SoC

 .../bindings/arm/airoha,en7581-chip-scu.yaml       |   42 +
 .../bindings/mfd/airoha,en7581-gpio-sysctl.yaml    |  433 +++
 MAINTAINERS                                        |    7 +
 drivers/mfd/Kconfig                                |    8 +
 drivers/mfd/Makefile                               |    2 +
 drivers/mfd/airoha-en7581-gpio-mfd.c               |   72 +
 drivers/pinctrl/mediatek/Kconfig                   |   17 +-
 drivers/pinctrl/mediatek/Makefile                  |    1 +
 drivers/pinctrl/mediatek/pinctrl-airoha.c          | 3007 ++++++++++++++++++++
 drivers/pwm/Kconfig                                |   10 +
 drivers/pwm/Makefile                               |    1 +
 drivers/pwm/pwm-airoha.c                           |  414 +++
 include/linux/mfd/airoha-en7581-mfd.h              |    9 +
 13 files changed, 4022 insertions(+), 1 deletion(-)
---
base-commit: 437d220f284a16e52c7d7f819e4a1a7e25fe8fe9
change-id: 20240818-en7581-pinctrl-1bf120154be0
prerequisite-change-id: 20240705-for-6-11-bpf-a349efc08df8:v2

Best regards,