mbox series

[0/4] Driver for Apple Z2 touchscreens.

Message ID 20241126-z2-v1-0-c43c4cc6200d@gmail.com (mailing list archive)
Headers show
Series Driver for Apple Z2 touchscreens. | expand

Message

Sasha Finkelstein via B4 Relay Nov. 26, 2024, 8:47 p.m. UTC 
Hi.

This series adds support for Apple touchscreens using the Z2 protocol.
Those are used as the primary touchscreen on mobile Apple devices, and for the
touchbar on laptops using the M-series chips. (T1/T2 laptops have a coprocessor
in charge of speaking Z2 to the touchbar).

Originally sent as a RFC at https://lore.kernel.org/all/20230223-z2-for-ml-v1-0-028f2b85dc15@gmail.com/
The changes since then mostly address the review feedback, but also
add another machine that has this specific controller.

The extra gpio needed to be toggled turned out to be a quirk of the
j293, normal CS is unusable on it, and a gpio has to be used instead.
(j493 does not have this quirk)

Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
Sasha Finkelstein (4):
      dt-bindings: input: touchscreen: Add Z2 controller
      input: apple_z2: Add a driver for Apple Z2 touchscreens
      arm64: dts: apple: Add touchbar digitizer nodes
      MAINTAINERS: Add entries for Apple Z2 touchscreen driver

 .../input/touchscreen/apple,z2-multitouch.yaml     |  83 ++++
 MAINTAINERS                                        |   2 +
 arch/arm64/boot/dts/apple/t8103-j293.dts           |  24 +
 arch/arm64/boot/dts/apple/t8103.dtsi               |  19 +
 arch/arm64/boot/dts/apple/t8112-j493.dts           |  20 +
 arch/arm64/boot/dts/apple/t8112.dtsi               |  14 +
 drivers/input/touchscreen/Kconfig                  |  13 +
 drivers/input/touchscreen/Makefile                 |   1 +
 drivers/input/touchscreen/apple_z2.c               | 495 +++++++++++++++++++++
 9 files changed, 671 insertions(+)
---
base-commit: 9f16d5e6f220661f73b36a4be1b21575651d8833
change-id: 20241124-z2-c012b528ea0d