mbox series

[v4,0/4] firmware: ti_sci: Partial-IO support

Message ID 20241219-topic-am62-partialio-v6-12-b4-v4-0-1cb8eabd407e@baylibre.com (mailing list archive)
Headers show
Series firmware: ti_sci: Partial-IO support | expand

Message

Markus Schneider-Pargmann Dec. 19, 2024, 8:02 p.m. UTC
Hi,

Series
------
Partial-IO is a poweroff SoC state with a few pingroups active for
wakeup. This state can be entered by sending a TI_SCI PREPARE_SLEEP
message.

The message is sent on poweroff if one of the potential wakeup sources
for this power state are wakeup enabled. The potential wakeup sources
are found by looking for devices that list "poweroff" in the
wakeup-source property in the devicetree. The wakeup sources can be
individually enabled/disabled by the user in the running system.

The series is based on v6.13-rc1.

Partial-IO
----------
This series is part of a bigger topic to support Partial-IO on am62,
am62a and am62p. Partial-IO is a poweroff state in which some pins are
able to wakeup the SoC. In detail MCU m_can and two serial port pins can
trigger the wakeup.
A documentation can also be found in section 6.2.4 in the TRM:
  https://www.ti.com/lit/pdf/spruiv7

This other series is relevant for the support of Partial-IO:

 - can: m_can: Add am62 wakeup support
   https://lore.kernel.org/r/20241219-topic-mcan-wakeup-source-v6-12-v6-0-1356c7f7cfda@baylibre.com
   https://gitlab.baylibre.com/msp8/linux/-/tree/topic/mcan-wakeup-source/v6.13?ref_type=heads

Testing
-------

A test branch is available here that includes all patches required to
test Partial-IO:

https://gitlab.baylibre.com/msp8/linux/-/tree/integration/am62-partialio/v6.13?ref_type=heads

After enabling Wake-on-LAN the system can be powered off and will enter
the Partial-IO state in which it can be woken up by activity on the
specific pins:
    ethtool -s can0 wol p
    ethtool -s can1 wol p
    poweroff

I tested these patches on am62-lp-sk.

Best,
Markus

Previous versions:
 v1: https://lore.kernel.org/lkml/20240523080225.1288617-1-msp@baylibre.com/
 v2: https://lore.kernel.org/lkml/20240729080101.3859701-1-msp@baylibre.com/
 v3: https://lore.kernel.org/r/20241012-topic-am62-partialio-v6-13-b4-v3-0-f7c6c2739681@baylibre.com

Changes in v4:
 - Rebased to v6.13-rc1
 - Removed all regulator related structures from patches and implemented
   the wakeup-source property use instead.

Changes in v3:
 - Remove other modes declared for PREPARE_SLEEP as they probably won't
   ever be used in upstream.
 - Replace the wait loop after sending PREPARE_SLEEP with msleep and do
   an emergency_restart if it exits
 - Remove uarts from DT wakeup sources
 - Split no response handling in ti_sci_do_xfer() into a separate patch
   and use goto instead of if ()
 - Remove DT binding parital-io-wakeup-sources. Instead I am modeling
   the devices that are in the relevant group that are powered during
   Partial-IO with the power supplies that are externally provided to
   the SoC. In this case they are provided through 'vddshv_canuart'. All
   devices using this regulator can be considered a potential wakeup
   source if they are wakeup capable and wakeup enabled.
 - Added devicetree patches adding vcc_3v3_sys regulator and
   vddshv_canuart for am62-lp-sk
 - Add pinctrl entries for am62-lp-sk to add WKUP_EN for mcu_mcan0 and
   mcu_mcan1

Changes in v2:
 - Rebase to v6.11-rc1
 - dt-binding:
    - Update commit message
    - Add more verbose description of the new binding for a better
      explanation.
 - ti_sci driver:
    - Combine ti_sci_do_send() into ti_sci_do_xfer and only wait on a
      response if a flag is set.
    - On failure to enter Partial-IO, do emergency_restart()
    - Add comments
    - Fix small things

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
Markus Schneider-Pargmann (4):
      firmware: ti_sci: Support transfers without response
      firmware: ti_sci: Partial-IO support
      arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag
      arm64: dts: ti: am62-lp-sk: Add wakeup mcu_mcan0/1 pinctrl

 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts |  52 +++++++++++++
 arch/arm64/boot/dts/ti/k3-pinctrl.h      |   3 +
 drivers/firmware/ti_sci.c                | 122 ++++++++++++++++++++++++++++++-
 drivers/firmware/ti_sci.h                |   5 ++
 4 files changed, 181 insertions(+), 1 deletion(-)
---
base-commit: cbc4912199deab59fdbd830b115d81941d0add46
change-id: 20241008-topic-am62-partialio-v6-12-b4-c273fbac4447
prerequisite-change-id: 20241009-topic-mcan-wakeup-source-v6-12-8c1d69931bd8:6
prerequisite-patch-id: eba4f2096c69d9c734a4a4491e062bd8b01d26fd
prerequisite-patch-id: 830b339ea452edd750b04f719da91e721be630cb
prerequisite-patch-id: 56fd0aae20e82eb2dfb48f1b7088d62311a11f05
prerequisite-patch-id: 41f55b96c0428240d74d488e3c788c09842a1753
prerequisite-patch-id: 4ab7269193dbcfd449349ccd41b23914bbbdaa6b
prerequisite-patch-id: 24a735db927cbe2b1e0c6c5f3985b6676ce5528c
prerequisite-patch-id: 52dbbf390d3f7e4a3859e60e4f660bfe39b92cd9

Best regards,