mbox series

[v7,0/2] arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2

Message ID 20250106-bigtreetech-cb2-v7-0-565567e2c0a4@gmail.com (mailing list archive)
Headers show
Series arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2 | expand

Message

Ivan Sergeev Jan. 6, 2025, 8:50 p.m. UTC 
BigTreeTech CB2 and Pi2 are Rockchip RK3566 SoM and SBC boards made by
BigTreeTech for the intent of using as a 3d printer control board.
It is a successor to the Allwinner H616-based BigTreeTech CB1 and Pi, so
the device trees for CB2 and Pi2 are also done in the same manner: the
common nodes and properties are put into a dtsi file that the
board-specific device trees include.

Changes in v7:
- Removed all of the additional pinctrl nodes that were unused.
- Link to v6: https://lore.kernel.org/r/20250105-bigtreetech-cb2-v6-0-ee7bc9c4df46@gmail.com

Changes in v6:
- Fixed node names missed in v5
- Link to v5: https://lore.kernel.org/r/20250105-bigtreetech-cb2-v5-0-923f911b10c0@gmail.com

Changes in v5:
- Applied requested changes
- Fixed usb `phy-supply` format
- Removed improperly named pinctrl nodes that were unused.
- Fixed names of other pinctrl nodes
- Link to v4: https://lore.kernel.org/r/20241230-bigtreetech-cb2-v4-0-26d2d30e07ce@gmail.com

Changes in v4:
- Removed invalid `i2c,ignore-nak` properties
- Set `#address-cells` and `size-cells` on `sdmmc1`
- Fixed `phy-supply` properties of usb host nodes
- Link to v3: https://lore.kernel.org/r/20241227-bigtreetech-cb2-v3-0-91c556adcffe@gmail.com

Changes in v3:
- Proper formatting and patch series sending (using b4)
- Converted spaces to tab indentation in the dtsi file
- Fixed empty line where the license identifier should be
- Link to v2 1/2: https://lore.kernel.org/linux-rockchip/20241224135751.350379-2-ivan8215145640@gmail.com/
- Link to v2 2/2: https://lore.kernel.org/linux-rockchip/20241224140057.350667-2-ivan8215145640@gmail.com/

Changes in v2:
- Added bigtreetech cb2 and pi2 boards to the list of platforms
- Split BigTreeTech CB2 and Pi2 into two device trees using common dtsi
- Link to v1: https://lore.kernel.org/linux-rockchip/20241222203952.84217-2-ivan8215145640@gmail.com/

Signed-off-by: Ivan Sergeev <ivan8215145640@gmail.com>
---
Ivan Sergeev (2):
      dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
      arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2

 .../devicetree/bindings/arm/rockchip.yaml          |  11 +
 arch/arm64/boot/dts/rockchip/Makefile              |   2 +
 .../dts/rockchip/rk3566-bigtreetech-cb2-manta.dts  |  10 +
 .../boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi  | 885 +++++++++++++++++++++
 .../boot/dts/rockchip/rk3566-bigtreetech-pi2.dts   |  10 +
 5 files changed, 918 insertions(+)
---
base-commit: 9d89551994a430b50c4fffcb1e617a057fa76e20
change-id: 20241224-bigtreetech-cb2-18944b349916

Best regards,

Comments

Heiko Stuebner Jan. 8, 2025, 12:02 p.m. UTC | #1 
On Mon, 06 Jan 2025 23:50:53 +0300, Ivan Sergeev wrote:
> BigTreeTech CB2 and Pi2 are Rockchip RK3566 SoM and SBC boards made by
> BigTreeTech for the intent of using as a 3d printer control board.
> It is a successor to the Allwinner H616-based BigTreeTech CB1 and Pi, so
> the device trees for CB2 and Pi2 are also done in the same manner: the
> common nodes and properties are put into a dtsi file that the
> board-specific device trees include.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
      commit: 1a623c642b4066a5cea751ef52ab109b65e8afb5
[2/2] arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
      commit: bfbc663d2733a42d93143a91659e82c8a13f5a36

Best regards,