mbox series

[0/2] arm64: dts: rockchip: Add H96 Max V58 (RK3588 based TV box)

Message ID 20250106-rk3588-h96-max-v58-v1-0-d25255f851fc@gmail.com (mailing list archive)
Headers show
Series arm64: dts: rockchip: Add H96 Max V58 (RK3588 based TV box) | expand

Message

Alexey Charkov Jan. 5, 2025, 9:07 p.m. UTC
H96 Max V58 is a compact TV box based on Rockchip RK3588 SoC [1]
that ships with Android by default. Add support for it.

Note that there is no publicly available hardware documentation,
nor vendor sources to be used as a reference, so this implementation
is best effort based on poking around my board and staring at the
decompiled stock DTB. It works for me, but improvement suggestions
are very much welcome.

HDMI output is not tested, but expected to work.

SPDIF output is not enabled (base RK3588 .dtsi needs amendment)

Auxiliary LED display is not enabled (no mainline driver available).
The controller used is FD6551 connected to GPIO3 RK_PC7 (clk) and
GPIO3 RK_PD0 (data), which happen to be the right pins for
i2c5m0_xfer pinctrl config, and thus might potentially be used with
the hardware I2C5 controller (to be verified). Out of tree userspace
driver is available at [2].

[1] https://www.h96tvbox.com/product/h96max-v58/
[2] https://github.com/arthur-liberman/linux_openvfd/blob/master/driver/controllers/fd650.c

Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
Alexey Charkov (2):
      dt-bindings: arm: rockchip: Add H96 Max V58 TV box
      arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC

 .../devicetree/bindings/arm/rockchip.yaml          |   5 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 .../arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts | 785 +++++++++++++++++++++
 3 files changed, 791 insertions(+)
---
base-commit: af349ca4d3f8659d84abc667125c826fda155109
change-id: 20240618-rk3588-h96-max-v58-c2c1bf8e6996

Best regards,

Comments

Rob Herring (Arm) Jan. 6, 2025, 7:27 p.m. UTC | #1
On Mon, 06 Jan 2025 01:07:16 +0400, Alexey Charkov wrote:
> H96 Max V58 is a compact TV box based on Rockchip RK3588 SoC [1]
> that ships with Android by default. Add support for it.
> 
> Note that there is no publicly available hardware documentation,
> nor vendor sources to be used as a reference, so this implementation
> is best effort based on poking around my board and staring at the
> decompiled stock DTB. It works for me, but improvement suggestions
> are very much welcome.
> 
> HDMI output is not tested, but expected to work.
> 
> SPDIF output is not enabled (base RK3588 .dtsi needs amendment)
> 
> Auxiliary LED display is not enabled (no mainline driver available).
> The controller used is FD6551 connected to GPIO3 RK_PC7 (clk) and
> GPIO3 RK_PD0 (data), which happen to be the right pins for
> i2c5m0_xfer pinctrl config, and thus might potentially be used with
> the hardware I2C5 controller (to be verified). Out of tree userspace
> driver is available at [2].
> 
> [1] https://www.h96tvbox.com/product/h96max-v58/
> [2] https://github.com/arthur-liberman/linux_openvfd/blob/master/driver/controllers/fd650.c
> 
> Signed-off-by: Alexey Charkov <alchark@gmail.com>
> ---
> Alexey Charkov (2):
>       dt-bindings: arm: rockchip: Add H96 Max V58 TV box
>       arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC
> 
>  .../devicetree/bindings/arm/rockchip.yaml          |   5 +
>  arch/arm64/boot/dts/rockchip/Makefile              |   1 +
>  .../arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts | 785 +++++++++++++++++++++
>  3 files changed, 791 insertions(+)
> ---
> base-commit: af349ca4d3f8659d84abc667125c826fda155109
> change-id: 20240618-rk3588-h96-max-v58-c2c1bf8e6996
> 
> Best regards,
> --
> Alexey Charkov <alchark@gmail.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y rockchip/rk3588-h96-max-v58.dtb' for 20250106-rk3588-h96-max-v58-v1-0-d25255f851fc@gmail.com:

arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: syscon@fd5d0000: usb2phy@0:otg-port: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: usb2phy@0: otg-port: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml#
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: regulator-3v3-pcie: gpios: [[267, 1, 0], [187, 20, 0]] is too long
	from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: regulator-3v3-pcie: Unevaluated properties are not allowed ('gpios' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
Alexey Charkov Jan. 6, 2025, 7:50 p.m. UTC | #2
On Mon, Jan 6, 2025 at 11:28 PM Rob Herring (Arm) <robh@kernel.org> wrote:
>
>
> On Mon, 06 Jan 2025 01:07:16 +0400, Alexey Charkov wrote:
> > H96 Max V58 is a compact TV box based on Rockchip RK3588 SoC [1]
> > that ships with Android by default. Add support for it.
> >
> > Note that there is no publicly available hardware documentation,
> > nor vendor sources to be used as a reference, so this implementation
> > is best effort based on poking around my board and staring at the
> > decompiled stock DTB. It works for me, but improvement suggestions
> > are very much welcome.
> >
> > HDMI output is not tested, but expected to work.
> >
> > SPDIF output is not enabled (base RK3588 .dtsi needs amendment)
> >
> > Auxiliary LED display is not enabled (no mainline driver available).
> > The controller used is FD6551 connected to GPIO3 RK_PC7 (clk) and
> > GPIO3 RK_PD0 (data), which happen to be the right pins for
> > i2c5m0_xfer pinctrl config, and thus might potentially be used with
> > the hardware I2C5 controller (to be verified). Out of tree userspace
> > driver is available at [2].
> >
> > [1] https://www.h96tvbox.com/product/h96max-v58/
> > [2] https://github.com/arthur-liberman/linux_openvfd/blob/master/driver/controllers/fd650.c
> >
> > Signed-off-by: Alexey Charkov <alchark@gmail.com>
> > ---
> > Alexey Charkov (2):
> >       dt-bindings: arm: rockchip: Add H96 Max V58 TV box
> >       arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC
> >
> >  .../devicetree/bindings/arm/rockchip.yaml          |   5 +
> >  arch/arm64/boot/dts/rockchip/Makefile              |   1 +
> >  .../arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts | 785 +++++++++++++++++++++
> >  3 files changed, 791 insertions(+)
> > ---
> > base-commit: af349ca4d3f8659d84abc667125c826fda155109
> > change-id: 20240618-rk3588-h96-max-v58-c2c1bf8e6996
> >
> > Best regards,
> > --
> > Alexey Charkov <alchark@gmail.com>
> >
> >
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
>   pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y rockchip/rk3588-h96-max-v58.dtb' for 20250106-rk3588-h96-max-v58-v1-0-d25255f851fc@gmail.com:
>
> arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: syscon@fd5d0000: usb2phy@0:otg-port: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
> arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: usb2phy@0: otg-port: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml#
> arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: regulator-3v3-pcie: gpios: [[267, 1, 0], [187, 20, 0]] is too long
>         from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
> arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dtb: regulator-3v3-pcie: Unevaluated properties are not allowed ('gpios' was unexpected)
>         from schema $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#

Indeed. Will fix it in v2, sorry for the noise.

Best,
Alexey