| Message ID | 20250203144422.269948-1-ninad@linux.ibm.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | DTS updates for system1 BMC | expand |
On Mon, 03 Feb 2025 08:44:10 -0600, Ninad Palsule wrote: > Hello, > > Please review the patch set version 7. > > V7: > --- > - Updated pattern in the ast2400-gpio.yaml > - Dropped "dt-bindings: net: faraday,ftgmac100" patch sending it > separately. > > V6: > --- > - Fixed dt_binding_check errors for ipmb-dev.yaml > - Changed the hog parsing pattern in ast2400-gpio > > V5: > --- > - Improved IPBM device documentation. > - Added the hog parsing in ast2400-gpio > > V4: > --- > - Removed "Add RGMII support" patch as it needs some work from the > driver side. > - Improved IPBM device documentation. > - There is a new warning in CHECK_DTBS which are false positive so > ignored them. > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dtb: gpio@1e780000: 'hog-0', 'hog-1', 'hog-2', 'hog-3' do not match any of the regexes: 'pinctrl-[0-9]+' > > V3: > --- > - Fixed dt_binding_check warnings in ipmb-dev.yaml > - Updated title and description in ipmb-dev.yaml file. > - Updated i2c-protocol description in ipmb-dev.yaml file. > > V2: > --- > Fixed CHECK_DTBS errors by > - Using generic node names > - Documenting phy-mode rgmii-rxid in ftgmac100.yaml > - Adding binding documentation for IPMB device interface > > NINAD PALSULE (6): > ARM: dts: aspeed: system1: Add IPMB device > ARM: dts: aspeed: system1: Add GPIO line name > ARM: dts: aspeed: system1: Reduce sgpio speed > ARM: dts: aspeed: system1: Update LED gpio name > ARM: dts: aspeed: system1: Remove VRs max8952 > ARM: dts: aspeed: system1: Mark GPIO line high/low > > Ninad Palsule (3): > bindings: ipmi: Add binding for IPMB device intf > dt-bindings: gpio: ast2400-gpio: Add hogs parsing > ARM: dts: aspeed: system1: Disable gpio pull down > > .../bindings/gpio/aspeed,ast2400-gpio.yaml | 6 + > .../devicetree/bindings/ipmi/ipmb-dev.yaml | 56 +++++++ > .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 139 +++++++++++------- > 3 files changed, 147 insertions(+), 54 deletions(-) > create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml > > -- > 2.43.0 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250203144422.269948-1-ninad@linux.ibm.com: arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dtb: gpio@1e780000: 'pin_func_mode0', 'pin_func_mode1', 'pin_func_mode2', 'pin_gpio_a0', 'pin_gpio_a1', 'pin_gpio_b1', 'pin_gpio_b2', 'pin_gpio_b7', 'pin_gpio_d1', 'pin_gpio_f1', 'pin_gpio_f4', 'pin_gpio_f5', 'pin_gpio_f7', 'pin_gpio_g3', 'pin_gpio_g4', 'pin_gpio_g5', 'pin_gpio_h0', 'pin_gpio_h1', 'pin_gpio_h2', 'pin_gpio_h7' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dtb: gpio@1e780000: 'nic_func_mode0', 'nic_func_mode1', 'seq_cont' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dtb: gpio@1e780000: 'doom-guardrail' does not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dtb: gpio@1e780000: 'pin_gpio_aa6', 'pin_gpio_aa7', 'pin_gpio_ab0', 'pin_gpio_b0', 'pin_gpio_b5', 'pin_gpio_h5', 'pin_gpio_z2' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dtb: gpio@1e780000: 'pin_gpio_b6', 'pin_gpio_i3' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: gpio@1e780000: 'usb_power' does not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dtb: /ahb/apb/bus@1e78a000/interrupt-controller@0: failed to match any schema with compatible: ['aspeed,ast2500-i2c-ic'] arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dtb: gpio@1e780000: 'bmc-ready' does not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dtb: gpio@1e780000: 'bmc-ready' does not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: gpio@1e780000: 'i2c3_mux_oe_n', 'usb_power' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: gpio@1e780000: 'i2c3_mux_oe_n', 'usb_power' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: gpio@1e780000: 'i2c3_mux_oe_n', 'usb_power' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: gpio@1e780000: 'usb_power' does not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dtb: gpio@1e780000: 'func_mode0', 'func_mode1', 'func_mode2', 'ncsi_cfg', 'seq_cont' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dtb: gpio@1e780000: 'pin_gpio_a1', 'pin_gpio_a3', 'pin_gpio_aa0', 'pin_gpio_aa4', 'pin_gpio_ab3', 'pin_gpio_ac6', 'pin_gpio_b5', 'pin_gpio_b7', 'pin_gpio_e0', 'pin_gpio_e2', 'pin_gpio_e5', 'pin_gpio_e6', 'pin_gpio_f0', 'pin_gpio_f1', 'pin_gpio_f2', 'pin_gpio_f3', 'pin_gpio_f4', 'pin_gpio_f6', 'pin_gpio_g7', 'pin_gpio_h6', 'pin_gpio_i3', 'pin_gpio_j1', 'pin_gpio_j2', 'pin_gpio_j3', 'pin_gpio_l0', 'pin_gpio_l1', 'pin_gpio_l4', 'pin_gpio_l5', 'pin_gpio_r6', 'pin_gpio_r7', 'pin_gpio_s1', 'pin_gpio_s2', 'pin_gpio_s6', 'pin_gpio_z3' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dtb: gpio@1e780000: 'pin_gpio_aa0', 'pin_gpio_aa5', 'pin_gpio_b5', 'pin_gpio_f0', 'pin_gpio_f3', 'pin_gpio_f4', 'pin_gpio_f5', 'pin_gpio_g4', 'pin_gpio_g7', 'pin_gpio_h2', 'pin_gpio_h3', 'pin_gpio_i3', 'pin_gpio_j2', 'pin_gpio_j3', 'pin_gpio_s2', 'pin_gpio_s4', 'pin_gpio_s6', 'pin_gpio_y0', 'pin_gpio_y1', 'pin_gpio_z0', 'pin_gpio_z2', 'pin_gpio_z3', 'pin_gpio_z7' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dtb: gpio@1e780000: 'line_bmc_i2c2_sw_rst_n', 'line_bmc_i2c5_sw_rst_n', 'line_iso_u146_en', 'ncsi_mux_en_n' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dtb: gpio@1e780000: 'pin_gpio_c7', 'pin_gpio_d1' do not match any of the regexes: '-hog(-[0-9]+)?$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
Hello, Please review the patch set version 7. V7: --- - Updated pattern in the ast2400-gpio.yaml - Dropped "dt-bindings: net: faraday,ftgmac100" patch sending it separately. V6: --- - Fixed dt_binding_check errors for ipmb-dev.yaml - Changed the hog parsing pattern in ast2400-gpio V5: --- - Improved IPBM device documentation. - Added the hog parsing in ast2400-gpio V4: --- - Removed "Add RGMII support" patch as it needs some work from the driver side. - Improved IPBM device documentation. - There is a new warning in CHECK_DTBS which are false positive so ignored them. arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dtb: gpio@1e780000: 'hog-0', 'hog-1', 'hog-2', 'hog-3' do not match any of the regexes: 'pinctrl-[0-9]+' V3: --- - Fixed dt_binding_check warnings in ipmb-dev.yaml - Updated title and description in ipmb-dev.yaml file. - Updated i2c-protocol description in ipmb-dev.yaml file. V2: --- Fixed CHECK_DTBS errors by - Using generic node names - Documenting phy-mode rgmii-rxid in ftgmac100.yaml - Adding binding documentation for IPMB device interface NINAD PALSULE (6): ARM: dts: aspeed: system1: Add IPMB device ARM: dts: aspeed: system1: Add GPIO line name ARM: dts: aspeed: system1: Reduce sgpio speed ARM: dts: aspeed: system1: Update LED gpio name ARM: dts: aspeed: system1: Remove VRs max8952 ARM: dts: aspeed: system1: Mark GPIO line high/low Ninad Palsule (3): bindings: ipmi: Add binding for IPMB device intf dt-bindings: gpio: ast2400-gpio: Add hogs parsing ARM: dts: aspeed: system1: Disable gpio pull down .../bindings/gpio/aspeed,ast2400-gpio.yaml | 6 + .../devicetree/bindings/ipmi/ipmb-dev.yaml | 56 +++++++ .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 139 +++++++++++------- 3 files changed, 147 insertions(+), 54 deletions(-) create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml