mbox series

[v7,0/4] Driver for Apple Z2 touchscreens.

Message ID 20250224-z2-v7-0-2746f2bd07d0@gmail.com (mailing list archive)
Headers show
Series Driver for Apple Z2 touchscreens. | expand

Message

Sasha Finkelstein via B4 Relay Feb. 24, 2025, 11:01 a.m. UTC 
Hi.

This series adds support for Apple touchscreens using the Z2 protocol.
Those are used as the primary touchscreen on mobile Apple devices, and for the
touchbar on laptops using the M-series chips. (T1/T2 laptops have a coprocessor
in charge of speaking Z2 to the touchbar).

Originally sent as a RFC at https://lore.kernel.org/all/20230223-z2-for-ml-v1-0-028f2b85dc15@gmail.com/
The changes since then mostly address the review feedback, but also
add another machine that has this specific controller.

Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
Changes in v7:
- Added a dependency on ARCH_APPLE to prevent potential confusion on x86
- Link to v6: https://lore.kernel.org/r/20250205-z2-v6-0-cc60cbee1d5b@gmail.com

Changes in v6:
- Went back to build_cal_blob returning an allocated buffer, other fixes.
- Link to v5: https://lore.kernel.org/r/20250118-z2-v5-0-6d38b2582169@gmail.com

Changes in v5:
- Added missing \ns, removed 4kb-ish of wasted ram
- Link to v4: https://lore.kernel.org/r/20250115-z2-v4-0-d7361ab16ba0@gmail.com

Changes in v4:
- Dropped another allocation, other fixes.
- Link to v3: https://lore.kernel.org/r/20250112-z2-v3-0-5c0e555d3df1@gmail.com

Changes in v3:
- Tx/Rx buffers used in interrupt handler are now allocated in probe and reused
- Other various style fixes
- Link to v2: https://lore.kernel.org/r/20241128-z2-v2-0-76cc59bbf117@gmail.com

Changes in v2:
- In a separate patch, fixed an issue that prevented the SPI controller
  from using GPIO CS, and as such, moved the hardware quirk to there
- Went back to uploading the firmware in probe() instad of open()
- Other changes addressing the review feedback
- Link to v1: https://lore.kernel.org/r/20241126-z2-v1-0-c43c4cc6200d@gmail.com

---
Sasha Finkelstein (4):
      dt-bindings: input: touchscreen: Add Z2 controller
      input: apple_z2: Add a driver for Apple Z2 touchscreens
      arm64: dts: apple: Add touchbar digitizer nodes
      MAINTAINERS: Add entries for Apple Z2 touchscreen driver

 .../input/touchscreen/apple,z2-multitouch.yaml     |  70 +++
 MAINTAINERS                                        |   2 +
 arch/arm64/boot/dts/apple/t8103-j293.dts           |  27 ++
 arch/arm64/boot/dts/apple/t8103.dtsi               |  19 +
 arch/arm64/boot/dts/apple/t8112-j493.dts           |  23 +
 arch/arm64/boot/dts/apple/t8112.dtsi               |  14 +
 drivers/input/touchscreen/Kconfig                  |  13 +
 drivers/input/touchscreen/Makefile                 |   1 +
 drivers/input/touchscreen/apple_z2.c               | 473 +++++++++++++++++++++
 9 files changed, 642 insertions(+)
---
base-commit: b62cef9a5c673f1b8083159f5dc03c1c5daced2f
change-id: 20241124-z2-c012b528ea0d