| Message ID | cover.1683034376.git.michal.simek@amd.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | arm64: zynqmp: Misc zynqmp changes | expand |
On 5/2/23 15:35, Michal Simek wrote: > Hi, > > the series is syncing the latest dt changes based on board status and the > latest DT schema. > The patches are based on > https://lore.kernel.org/all/20230321070619.29440-1-parth.gajjar@amd.com/ > > Thanks, > Michal > > > Amit Kumar Mahapatra (2): > arm64: zynqmp: Set qspi tx-buswidth to 4 > arm64: zynqmp: Add mtd partition for secure OS storage area > > Ashok Reddy Soma (1): > arm64: zynqmp: Fix usb node drive strength and slew rate > > Michal Simek (15): > arm64: zynqmp: Describe TI phy as ethernet-phy-id > arm64: zynqmp: Fix usb reset over bootmode pins on zcu100 > arm64: zynqmp: Sync node name address with reg (mailbox) > arm64: zynqmp: Add dmas, dp, rtc, watchdogs and opp nodes for SOM > arm64: zynqmp: Use assigned-clock-rates for setting up SD clock in SOM > arm64: zynqmp: Used fixed-partitions for QSPI in k26 > arm64: zynqmp: Add gpio labels for modepin gpio > arm64: zynqmp: Add pinctrl emmc description to SM-K26 > arm64: zynqmp: Switch to ethernet-phy-id in kv260 > arm64: zynqmp: Setup clock for DP and DPDMA > arm64: zynqmp: Enable DP driver for SOMs > arm64: zynqmp: Rename ams_ps/pl node names > arm64: zynqmp: Enable AMS on SOM and other zcu10x boards > arm64: zynqmp: Describe bus-width for SD card on KV260 > arm64: zynqmp: Add phase tags marking > > Piyush Mehta (1): > arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2 > > Radhey Shyam Pandey (2): > arm64: zynqmp: Add L2 cache nodes > arm64: zynqmp: Add pmu interrupt-affinity > > Sai Krishna Potthuri (1): > arm64: zynqmp: Add resets property to sdhci nodes > > Srinivas Neeli (1): > arm64: zynqmp: Add linux,code for gpio button > > .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 15 +- > .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 20 +- > .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 20 +- > .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 321 +++++++++++++----- > .../boot/dts/xilinx/zynqmp-zc1232-revA.dts | 2 +- > .../boot/dts/xilinx/zynqmp-zc1254-revA.dts | 2 +- > .../boot/dts/xilinx/zynqmp-zc1275-revA.dts | 2 +- > .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 10 +- > .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 10 +- > .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 2 +- > .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 32 +- > .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 42 ++- > .../boot/dts/xilinx/zynqmp-zcu102-revB.dts | 25 +- > .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 42 ++- > .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 42 ++- > .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 29 +- > .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 29 +- > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 33 +- > 18 files changed, 513 insertions(+), 165 deletions(-) > I have applied the most of these patches. The rest will be update and sent as v2. Thanks, Michal