mbox series

[v2,0/2] arm64: dts: rockchip: Improve gmac phy setup for QNAP-TS433

Message ID cover.1742331667.git.ukleinek@kernel.org (mailing list archive)
Headers show
Series arm64: dts: rockchip: Improve gmac phy setup for QNAP-TS433 | expand

Message

Uwe Kleine-König March 18, 2025, 9:08 p.m. UTC 
Hello,

as suggested by Heiko I split the patch to improve the phy setup of the
gmac ethernet into two patches. The initial patch can be found at
https://lore.kernel.org/linux-arm-kernel/20250318184550.47642-2-uwe@kleine-koenig.org/ .

Heiko also suggested to add Fixes tags. I'm unsure these are justified
because while these patches are an improvement the old devicetree is
working fine. I suggest Heiko to add the tags if he feels strongly
enough about these.

Best regards
Uwe

Uwe Kleine-König (2):
  arm64: dts: rockchip: Correct gmac phy address
  arm64: dts: rockchip: Add gmac phy reset GPIO

 .../arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b