Show patches with: Submitter = André Draszik       |    State = Action Required       |   167 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,1/5] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit HSI0 and HSI2 support for Google Tensor gs101 - 2 - --- 2024-04-26 André Draszik New
[2/2] pinctrl: samsung: support a bus clock clock support for Samsung Exynos pin controller (Google Tensor gs101) - - - --- 2024-04-25 André Draszik New
[1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock clock support for Samsung Exynos pin controller (Google Tensor gs101) - - - --- 2024-04-25 André Draszik New
[2/2] arm64: dts: exynos: gs101-oriole: enable USB on this board enable USB on Pixel 6 (Oriole) - - - --- 2024-04-23 André Draszik New
[1/2] arm64: dts: exynos: gs101: add USB & USB-phy nodes enable USB on Pixel 6 (Oriole) - - - --- 2024-04-23 André Draszik New
[2/2] usb: dwc3: exynos: add support for Google Tensor gs101 USB (dwc3-glue) support for Google Tensor gs101 1 2 - --- 2024-04-23 André Draszik New
[1/2] dt-bindings: usb: samsung,exynos-dwc3: add gs101 compatible USB (dwc3-glue) support for Google Tensor gs101 - 3 - --- 2024-04-23 André Draszik New
[7/7] phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS) USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[6/7] phy: exynos5-usbdrd: convert to clk_bulk for phy (register) access USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[5/7] phy: exynos5-usbdrd: uniform order of register bit macros USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[4/7] phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init() USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[3/7] phy: exynos5-usbdrd: support isolating HS and SS ports independently USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[2/7] phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[1/7] dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible USB31DRD phy support for Google Tensor gs101 (HS & SS) - - - --- 2024-04-23 André Draszik New
[3/3] clk: samsung: clk-gs101: add cmu_hsi0 HSI0 support for Google Tensor gs101 - - - --- 2024-04-23 André Draszik New
[2/3] arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller HSI0 support for Google Tensor gs101 - - - --- 2024-04-23 André Draszik New
[1/3] dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit HSI0 support for Google Tensor gs101 - 1 - --- 2024-04-23 André Draszik New
[v3,7/7] arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 2 - --- 2024-02-01 André Draszik New
[v3,6/7] arm64: dts: exynos: gs101: define USI12 with I2C configuration gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 2 - --- 2024-02-01 André Draszik New
[v3,5/7] arm64: dts: exynos: gs101: enable cmu-peric1 clock controller gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-02-01 André Draszik New
[v3,4/7] dt-bindings: samsung: exynos-sysreg: gs101-peric1 requires a clock gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 4 - --- 2024-02-01 André Draszik New
[v3,3/7] clk: samsung: gs101: add support for cmu_peric1 gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-02-01 André Draszik New
[v3,2/7] dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 4 - --- 2024-02-01 André Draszik New
[v3,1/7] clk: samsung: gs-101: drop extra empty line gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-02-01 André Draszik New
arm64: dts: exynos: gs101: add stable i2c aliases for gs101-oriole arm64: dts: exynos: gs101: add stable i2c aliases for gs101-oriole - - 1 --- 2024-01-30 André Draszik New
[v2,6/6] arm64: dts: exynos: gs101: reorder hsi2c_8 pinctrl-* properties gs101 oriole: peripheral block 0 (peric0) fixes - - - --- 2024-01-30 André Draszik New
[v2,5/6] clk: samsung: gs101: don't mark non-essential clocks as critical gs101 oriole: peripheral block 0 (peric0) fixes - 2 - --- 2024-01-30 André Draszik New
[v2,4/6] arm64: dts: exynos: gs101: use correct clocks for usi_uart gs101 oriole: peripheral block 0 (peric0) fixes - 2 1 --- 2024-01-30 André Draszik New
[v2,3/6] arm64: dts: exynos: gs101: use correct clocks for usi8 gs101 oriole: peripheral block 0 (peric0) fixes - 2 1 --- 2024-01-30 André Draszik New
[v2,2/6] arm64: dts: exynos: gs101: fix usi8 default mode gs101 oriole: peripheral block 0 (peric0) fixes - 3 - --- 2024-01-30 André Draszik New
[v2,1/6] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on gs101 oriole: peripheral block 0 (peric0) fixes - 3 - --- 2024-01-30 André Draszik New
[v3,7/7] arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik New
[v3,6/7] arm64: dts: exynos: gs101: define USI12 with I2C configuration gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 2 - --- 2024-01-29 André Draszik New
[v3,5/7] arm64: dts: exynos: gs101: enable cmu-peric1 clock controller gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik New
[v3,4/7] dt-bindings: samsung: exynos-sysreg: gs101-peric1 requires a clock gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 4 - --- 2024-01-29 André Draszik New
[v3,3/7] clk: samsung: gs101: add support for cmu_peric1 gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik New
[v3,2/7] dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 4 - --- 2024-01-29 André Draszik New
[v3,1/7] clk: samsung: gs-101: drop extra empty line gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik New
[v2,7/7] arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 2 - --- 2024-01-29 André Draszik New
[v2,6/7] arm64: dts: exynos: gs101: define USI12 with I2C configuration gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 1 - --- 2024-01-29 André Draszik New
[v2,5/7] arm64: dts: exynos: gs101: enable cmu-peric1 clock controller gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 2 - --- 2024-01-29 André Draszik New
[v2,4/7] dt-bindings: samsung: exynos-sysreg: gs101-peric1 requires a clock gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 2 - --- 2024-01-29 André Draszik New
[v2,3/7] clk: samsung: gs101: add support for cmu_peric1 gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 2 - --- 2024-01-29 André Draszik New
[v2,2/7] dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik New
[v2,1/7] clk: samsung: gs-101: drop extra empty line gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik New
[5/5] clk: samsung: gs101: don't mark non-essential clocks as critical [1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on - 2 - --- 2024-01-27 André Draszik New
[4/5] arm64: dts: exynos: gs101: use correct clocks for usi_uart [1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on - 2 1 --- 2024-01-27 André Draszik New
[3/5] arm64: dts: exynos: gs101: use correct clocks for usi8 [1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on - 2 1 --- 2024-01-27 André Draszik New
[2/5] arm64: dts: exynos: gs101: fix usi8 default mode [1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on - 3 - --- 2024-01-27 André Draszik New
[1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on [1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on - 3 - --- 2024-01-27 André Draszik New
[9/9] clk: samsung: gs101: don't CLK_IGNORE_UNUSED peric1_sysreg clock [1/9] clk: samsung: gs-101: drop extra empty line - 2 - --- 2024-01-27 André Draszik New
[8/9] arm64: dts: exynos: gs101: sysreg_peric1 needs a clock [1/9] clk: samsung: gs-101: drop extra empty line - 1 - --- 2024-01-27 André Draszik New
[7/9] dt-bindings: samsung: exynos-sysreg: gs101-peric1 requires a clock [1/9] clk: samsung: gs-101: drop extra empty line - 2 - --- 2024-01-27 André Draszik New
[6/9] arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole [1/9] clk: samsung: gs-101: drop extra empty line - 1 - --- 2024-01-27 André Draszik New
[5/9] arm64: dts: exynos: gs101: define USI12 with I2C configuration [1/9] clk: samsung: gs-101: drop extra empty line - 1 - --- 2024-01-27 André Draszik New
[4/9] arm64: dts: exynos: gs101: enable cmu-peric1 clock controller [1/9] clk: samsung: gs-101: drop extra empty line - 2 - --- 2024-01-27 André Draszik New
[3/9] clk: samsung: gs101: add support for cmu_peric1 [1/9] clk: samsung: gs-101: drop extra empty line - 2 - --- 2024-01-27 André Draszik New
[2/9] dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit [1/9] clk: samsung: gs-101: drop extra empty line - 3 - --- 2024-01-27 André Draszik New
[1/9] clk: samsung: gs-101: drop extra empty line [1/9] clk: samsung: gs-101: drop extra empty line - 3 - --- 2024-01-27 André Draszik New
[v3,2/2] arm64: dts: exynos: gs101: sysreg_peric0 needs a clock [v3,1/2] dt-bindings: samsung: exynos-sysreg: gs101-peric0 requires a clock - - - --- 2024-01-26 André Draszik New
[v3,1/2] dt-bindings: samsung: exynos-sysreg: gs101-peric0 requires a clock [v3,1/2] dt-bindings: samsung: exynos-sysreg: gs101-peric0 requires a clock - - - --- 2024-01-26 André Draszik New
[v2] arm64: dts: exynos: gs101: sysreg_peric0 needs a clock [v2] arm64: dts: exynos: gs101: sysreg_peric0 needs a clock - - - --- 2024-01-25 André Draszik New
[2/2] arm64: dts: exynos: gs101: sysreg_peric1 needs a clock [1/2] dt-bindings: samsung: exynos-sysreg: gs101-peric0 requires a clock - - - --- 2024-01-25 André Draszik New
[1/2] dt-bindings: samsung: exynos-sysreg: gs101-peric0 requires a clock [1/2] dt-bindings: samsung: exynos-sysreg: gs101-peric0 requires a clock - - - --- 2024-01-25 André Draszik New
[v2] tty: serial: samsung_tty: remove dead code [v2] tty: serial: samsung_tty: remove dead code - 2 - --- 2023-10-19 André Draszik New
[2/2] dt-bindings: serial: drop unsupported samsung bindings [1/2] tty: serial: samsung: drop earlycon support for unsupported platforms - 2 - --- 2023-10-19 André Draszik New
[1/2] tty: serial: samsung: drop earlycon support for unsupported platforms [1/2] tty: serial: samsung: drop earlycon support for unsupported platforms - 2 - --- 2023-10-19 André Draszik New
« 1 2 »