Show patches with: Submitter = Gerd Hoffmann       |    State = Action Required       |   133 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,1/9] pinctrl: walk into bcm subdir unconditionally 1 - - --- 2016-06-03 Gerd Hoffmann New
[32/32] mmc: bcm2835: Import bcm2835-mmc and switch to it - - - --- 2016-06-01 Gerd Hoffmann New
[31/32] enable wireless - - - --- 2016-06-01 Gerd Hoffmann New
[30/32] ARM: bcm2835: Add a new EMMC pin group from the downstream tree. - - - --- 2016-06-01 Gerd Hoffmann New
[29/32] ARM: bcm2835: Use i2c-gpio for the expander, instead. - - - --- 2016-06-01 Gerd Hoffmann New
[28/32] i2c: bcm2835: Set up the rising/falling edge delays. - - - --- 2016-06-01 Gerd Hoffmann New
[27/32] gpio: Add support for the FXL6408 GPIO expander. - - - --- 2016-06-01 Gerd Hoffmann New
[26/32] enable uart1 on the BT pins - - - --- 2016-06-01 Gerd Hoffmann New
[25/32] dt-gpio-fix - - - --- 2016-06-01 Gerd Hoffmann New
[24/32] i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock - - - --- 2016-06-01 Gerd Hoffmann New
[23/32] ARM: bcm2835: Enable SDHOST by default. - - - --- 2016-06-01 Gerd Hoffmann New
[22/32] ARM: bcm2835: Include SDHOST in the device tree. - - - --- 2016-06-01 Gerd Hoffmann New
[21/32] mmc: bcm2835-sdhost: Add new driver for the internal SD controller. - - - --- 2016-06-01 Gerd Hoffmann New
[20/32] dt-bindings: Add binding for brcm,bcm2835-sdhost. - - - --- 2016-06-01 Gerd Hoffmann New
[19/32] bcm2837-rpi-3-b.dts: move most RPi default pin groups to their devices - - - --- 2016-06-01 Gerd Hoffmann New
[18/32] ARM: bcm2835: Move most RPi default pin groups to their devices. - - - --- 2016-06-01 Gerd Hoffmann New
[17/32] ARM: bcm2835: Add a group for mapping pins 48-53 to sdhost. - - - --- 2016-06-01 Gerd Hoffmann New
[16/32] bcm2837-rpi-3-b.dts: move the emmc pin group - - - --- 2016-06-01 Gerd Hoffmann New
[15/32] ARM: bcm2835: Move the emmc pin group to bcm283x.dtsi. - - - --- 2016-06-01 Gerd Hoffmann New
[14/32] bcm2837-rpi-3-b.dts: vc4 hdmi fixup - - - --- 2016-06-01 Gerd Hoffmann New
[13/32] bcm2837-rpi-3-b.dts: add gpio - - - --- 2016-06-01 Gerd Hoffmann New
[12/32] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups. - - - --- 2016-06-01 Gerd Hoffmann New
[11/32] ARM: bcm2835: Define standard pinctrl groups in the gpio node. - - - --- 2016-06-01 Gerd Hoffmann New
[10/32] don't force serial pins to uart0 - - - --- 2016-06-01 Gerd Hoffmann New
[09/32] bcm2837-rpi-3-b.dts for 32bit arm - - - --- 2016-06-01 Gerd Hoffmann New
[08/32] ARM: bcm2837: dt: Add the ethernet to the device trees - - - --- 2016-06-01 Gerd Hoffmann New
[07/32] ARM: bcm2835: dt: Add the ethernet to the device trees 1 - - --- 2016-06-01 Gerd Hoffmann New
[06/32] arm64: Fix physical to DMA mappings. - - - --- 2016-06-01 Gerd Hoffmann New
[05/32] ARM: bcm2835: Add devicetree for the Raspberry Pi 3. 1 - - --- 2016-06-01 Gerd Hoffmann New
[04/32] dt-bindings: Add root properties for Raspberry Pi 3 2 - - --- 2016-06-01 Gerd Hoffmann New
[03/32] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ. - - - --- 2016-06-01 Gerd Hoffmann New
[02/32] arm64: Add BCM2835 support to the defconfig. - - - --- 2016-06-01 Gerd Hoffmann New
[01/32] arm64: Add platform selection for BCM2835. - - - --- 2016-06-01 Gerd Hoffmann New
« 1 2 »