Show patches with: Submitter = Philipp Zabel       |    State = Action Required       |   489 patches
« 1 2 ... 2 3 4 5 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v3,4/7] ARM: imx6: gpc: Add observed worst case latencies - - - --- 2014-02-17 Philipp Zabel New
[v3,3/7] ARM: imx6: gpc: Add pm clock support to PU power domain - - - --- 2014-02-17 Philipp Zabel New
[v3,2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-02-17 Philipp Zabel New
[v3,1/7] Documentation: Add device tree bindings for Freescale i.MX GPC - - - --- 2014-02-17 Philipp Zabel New
[v2,2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-02-13 Philipp Zabel New
[v2,7/7] ARM: dts: imx6sl: Add power-domain information to gpc node - - - --- 2014-02-13 Philipp Zabel New
[v2,6/7] ARM: dts: imx6qdl: Add power-domain information to gpc node - - - --- 2014-02-13 Philipp Zabel New
[v2,5/7] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay - - - --- 2014-02-13 Philipp Zabel New
[v2,4/7] ARM: imx6: gpc: Add observed worst case latencies - - - --- 2014-02-13 Philipp Zabel New
[v2,3/7] ARM: imx6: gpc: Add pm clock support to PU power domain - - - --- 2014-02-13 Philipp Zabel New
[v2,2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-02-13 Philipp Zabel New
[v2,1/7] Documentation: Add device tree bindings for Freescale i.MX GPC - - - --- 2014-02-13 Philipp Zabel New
[RFC,1/4] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-02-12 Philipp Zabel New
[RFC,4/4] ARM: dts: imx6qdl: Add PU power-domain information to gpc node - - - --- 2014-02-11 Philipp Zabel New
[RFC,3/4] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay - - - --- 2014-02-11 Philipp Zabel New
[RFC,2/4] ARM: imx6: gpc: Add pm clock support to PU power domain - - - --- 2014-02-11 Philipp Zabel New
[RFC,1/4] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-02-11 Philipp Zabel New
[RFC,v2,4/4] ARM: dts: imx6qdl: Add ports and endpoints to IPU DIs - - - --- 2014-02-11 Philipp Zabel New
[RFC,v2,3/4] staging: imx-drm-core: associate crtc devices with di port nodes - - - --- 2014-02-11 Philipp Zabel New
[RFC,v2,2/4] staging: imx-drm-core: Use graph to find connection between crtc and encoder - - - --- 2014-02-11 Philipp Zabel New
[RFC,v2,1/4] staging: imx-drm: Add temporary copies of v4l2-of parsing functions - - - --- 2014-02-11 Philipp Zabel New
ARM: imx6: Initialize low-power mode early again - - - --- 2014-01-29 Philipp Zabel New
[RFC,v2] staging: imx-hdmi: use rx sense status for plug detection if hpd is unreliable - - - --- 2014-01-10 Philipp Zabel New
[RFC,27/46] imx-drm: convert to componentised device support - - - --- 2014-01-07 Philipp Zabel New
[RFC,3/3] staging: imx-drm-core: associate crtc devices with di port nodes - - - --- 2014-01-06 Philipp Zabel New
[RFC,2/3] staging: imx-drm-core: Use graph to find connection between crtc and encoder - - - --- 2014-01-06 Philipp Zabel New
[RFC,1/3] ARM: dts: imx6qdl: Add ports and endpoints to IPU DIs - - - --- 2014-01-06 Philipp Zabel New
[RFC,27/46] imx-drm: convert to componentised device support - - - --- 2014-01-03 Philipp Zabel New
ARM: dts: imx6q-sabrelite: PHY reset is active-low - - - --- 2013-12-20 Philipp Zabel New
[2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree - - - --- 2013-09-26 Philipp Zabel New
[1/2] Documentation: Add device tree bindings for i.MX TVE - - - --- 2013-09-26 Philipp Zabel New
[v11] reset: Add driver for gpio-controlled reset pins - - - --- 2013-07-26 Philipp Zabel New
[2/2] ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module - - - --- 2013-07-24 Philipp Zabel New
[1/2] ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module - - - --- 2013-07-24 Philipp Zabel New
reset: allow drivers to request probe deferral - - - --- 2013-07-18 Philipp Zabel New
[v10] reset: Add driver for gpio-controlled reset pins - - - --- 2013-07-18 Philipp Zabel New
[v9] reset: Add driver for gpio-controlled reset pins - - - --- 2013-07-16 Philipp Zabel New
[v2] ARM: dts: add sram for imx53 and imx6q - - - --- 2013-07-01 Philipp Zabel New
[2/2] ARM i.MX6DL: dts: add clock and mux configuration for LDB - - - --- 2013-06-28 Philipp Zabel New
[1/2] ARM i.MX6DL: parent LDB DI clocks to PLL5 on i.MX6S/DL - - - --- 2013-06-28 Philipp Zabel New
ARM: dts: add sram for imx53 and imx6q - - - --- 2013-06-28 Philipp Zabel New
[2/2] ARM i.MX6Q: Use ENET_CLK_SEL defines in imx6q_1588_init - - - --- 2013-06-26 Philipp Zabel New
[1/2] ARM i.MX6Q: Fix IOMUXC GPR1 defines for ENET_CLK_SEL and IPU1/2_MUX - - - --- 2013-06-26 Philipp Zabel New
[RFC] ARM i.MX53: Fix UART pad configuration - - - --- 2013-06-21 Philipp Zabel New
[2/2] staging: drm/imx: use generic irq chip unused field to block out invalid irqs - - - --- 2013-06-21 Philipp Zabel New
[1/2] staging: drm/imx: use generic irqchip - - - --- 2013-06-21 Philipp Zabel New
[4/4] staging: drm/imx: ipu-dmfc: use defines for ipu channel numbers - - - --- 2013-06-21 Philipp Zabel New
[3/4] staging: drm/imx: ipuv3-crtc: immediately update crtc->fb in ipu_page_flip - - - --- 2013-06-21 Philipp Zabel New
[2/4] staging: drm/imx: ipu-dmfc: fix bandwidth allocation - - - --- 2013-06-21 Philipp Zabel New
[1/4] staging: drm/imx: remove unused variables - - - --- 2013-06-21 Philipp Zabel New
[2/2] staging: drm/imx: convert IPU irq driver to irq_domain_add_linear - - - --- 2013-06-21 Philipp Zabel New
[1/2] staging: drm/imx: fix number of IPU IRQs - - - --- 2013-06-21 Philipp Zabel New
[v8] reset: Add driver for gpio-controlled reset pins - - - --- 2013-05-30 Philipp Zabel New
[v7] reset: Add driver for gpio-controlled reset pins - - - --- 2013-05-28 Philipp Zabel New
[2/2] ARM i.MX5: Add S/PDIF clocks - - - --- 2013-05-17 Philipp Zabel New
[1/2] ARM i.MX53: Add SATA clock - - - --- 2013-05-17 Philipp Zabel New
[1/3] staging: drm/imx: set correct sync pins for parallel display - - - --- 2013-05-17 Philipp Zabel New
[v2] ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks - - - --- 2013-04-17 Philipp Zabel New
ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks - - - --- 2013-04-11 Philipp Zabel New
ARM i.MX53: dts: add i2c aliases - - - --- 2013-04-09 Philipp Zabel New
[2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree - - - --- 2013-04-08 Philipp Zabel New
[1/2] ARM i.MX53: Add TVE entry to i.MX53 dtsi - - - --- 2013-04-08 Philipp Zabel New
[7/7] staging: drm/imx: Add support for Television Encoder (TVEv2) - - - --- 2013-04-08 Philipp Zabel New
[6/7] staging: drm/imx: ipu-dc: force black output during blanking - - - --- 2013-04-08 Philipp Zabel New
[5/7] staging: drm/imx: ipu-dc: add WCLK/WRG opcodes - - - --- 2013-04-08 Philipp Zabel New
[4/7] staging: drm/imx: Add support for VGA via TVE on i.MX53 - - - --- 2013-04-08 Philipp Zabel New
[3/7] staging: drm/imx: ipu-di: add comments explaining signal generator configuration - - - --- 2013-04-08 Philipp Zabel New
[2/7] staging: drm/imx: ipuv3-crtc: use external clock for TV Encoder - - - --- 2013-04-08 Philipp Zabel New
[1/7] staging: drm/imx: ipu-dc: add 24-bit GBR support to DC - - - --- 2013-04-08 Philipp Zabel New
[5/5] ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock - - - --- 2013-04-08 Philipp Zabel New
[4/5] ARM i.MX53: tve_di clock is not part of the CCM, but of TVE - - - --- 2013-04-08 Philipp Zabel New
[3/5] ARM i.MX53: make tve_ext_sel propagate rate change to PLL - - - --- 2013-04-08 Philipp Zabel New
[2/5] ARM i.MX53: Remove unused tve_gate clkdev entry - - - --- 2013-04-08 Philipp Zabel New
[1/5] ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree - - - --- 2013-04-08 Philipp Zabel New
[v6,8/8] ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree - - - --- 2013-03-28 Philipp Zabel New
[v6,7/8] ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53 - - - --- 2013-03-28 Philipp Zabel New
[v6,6/8] staging: drm/imx: Use SRC to reset IPU - - - --- 2013-03-28 Philipp Zabel New
[v6,5/8] ARM i.MX6q: Link system reset controller (SRC) to IPU in DT - - - --- 2013-03-28 Philipp Zabel New
[v6,4/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC) - - - --- 2013-03-28 Philipp Zabel New
[v6,3/8] reset: Add driver for gpio-controlled reset pins - - - --- 2013-03-28 Philipp Zabel New
[v6,2/8] reset: Add reset controller API - - - --- 2013-03-28 Philipp Zabel New
[v6,1/8] dt: describe base reset signal binding - - - --- 2013-03-28 Philipp Zabel New
[v3,11/11] ARM i.MX6q: Add LDB device to device tree - - - --- 2013-03-28 Philipp Zabel New
[v3,10/11] ARM i.MX53: Add LDB device to device tree - - - --- 2013-03-28 Philipp Zabel New
[v3,09/11] ARM i.MX53: Add IOMUXC GPR to device tree - - - --- 2013-03-28 Philipp Zabel New
[v3,08/11] ARM i.MX6q: set the LDB serial clock parent to the video PLL - - - --- 2013-03-28 Philipp Zabel New
[v3,07/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1 - - - --- 2013-03-28 Philipp Zabel New
[v3,06/11] staging: drm/imx: Add LDB support - - - --- 2013-03-28 Philipp Zabel New
[v3,05/11] ARM i.MX6q: fix ldb di divider and selector clocks - - - --- 2013-03-28 Philipp Zabel New
[v3,04/11] ARM i.MX53: fix ldb di divider and selector clocks - - - --- 2013-03-28 Philipp Zabel New
[v3,03/11] ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags - - - --- 2013-03-28 Philipp Zabel New
[v3,02/11] ARM i.MX6q: export imx6q_revision - - - --- 2013-03-28 Philipp Zabel New
[v3,01/11] ARM i.MX5: Move IPU clock lookups into device tree - - - --- 2013-03-28 Philipp Zabel New
[v2,11/11] ARM i.MX6q: Add LDB device to device tree - - - --- 2013-03-27 Philipp Zabel New
[v2,10/11] ARM i.MX53: Add LDB device to device tree - - - --- 2013-03-27 Philipp Zabel New
[v2,09/11] ARM i.MX53: Add IOMUXC GPR to device tree - - - --- 2013-03-27 Philipp Zabel New
[v2,08/11] ARM i.MX6q: fix ldb di divider and selector clocks - - - --- 2013-03-27 Philipp Zabel New
[v2,07/11] ARM i.MX53: fix ldb di divider and selector clocks - - - --- 2013-03-27 Philipp Zabel New
[v2,06/11] ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags - - - --- 2013-03-27 Philipp Zabel New
[v2,05/11] ARM i.MX6q: set the LDB serial clock parent to the video PLL - - - --- 2013-03-27 Philipp Zabel New
« 1 2 ... 2 3 4 5 »