Show patches with: Submitter = Martin Blumenstingl       |   905 patches
« 1 2 ... 5 6 7 … 9 10 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[2/6] ARM: dts: meson8: add the temperature calibration data for the SAR ADC ARM: dts: meson: chip temperature (hwmon) support - - - --- 2019-01-12 Martin Blumenstingl Mainlined
[1/6] ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible ARM: dts: meson: chip temperature (hwmon) support - - - --- 2019-01-12 Martin Blumenstingl Mainlined
[v4,1/1] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins Meson8b RGMII Ethernet pin fixes - 2 1 --- 2019-01-12 Martin Blumenstingl Mainlined
[v3,2/2] ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins Meson8b RGMII Ethernet pin fixes - 1 1 --- 2018-12-29 Martin Blumenstingl New
[v3,1/2] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins Meson8b RGMII Ethernet pin fixes - 2 1 --- 2018-12-29 Martin Blumenstingl New
[3/3] ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ARM: dts: meson: fix SD card cd-gpio (pre v4.21-rc) - 1 - --- 2018-12-29 Martin Blumenstingl Mainlined
[2/3] ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low ARM: dts: meson: fix SD card cd-gpio (pre v4.21-rc) - 1 - --- 2018-12-29 Martin Blumenstingl Mainlined
[1/3] ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low ARM: dts: meson: fix SD card cd-gpio (pre v4.21-rc) - 1 1 --- 2018-12-29 Martin Blumenstingl Mainlined
[v2,1/1] ARM: dts: meson8b: drop eth_txd0_1 and eth_txd1_1 from eth_rgmii_pins Meson8b RGMII Ethernet pin cleanup - - - --- 2018-12-29 Martin Blumenstingl New
[2/2] iio: adc: meson-saradc: enable the temperature sensor two more SoCs meson-saradc: temperature sensor support for Meson8b/Meson8m2 - - - --- 2018-12-27 Martin Blumenstingl Mainlined
[1/2] dt-bindings: iio: adc: meson-saradc: update temperature sensor support meson-saradc: temperature sensor support for Meson8b/Meson8m2 - 1 - --- 2018-12-27 Martin Blumenstingl Mainlined
[1/1] clk: meson: meson8b: fix naming of the APB clocks clk: meson8b: fix typo "ABP" -> "APB" - - - --- 2018-12-23 Martin Blumenstingl New
[6/6] pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: various fixes for Meson8 and Meson8b SoCs - - - --- 2018-12-09 Martin Blumenstingl New
[5/6] pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: various fixes for Meson8 and Meson8b SoCs - - - --- 2018-12-09 Martin Blumenstingl New
[4/6] pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: various fixes for Meson8 and Meson8b SoCs - - - --- 2018-12-09 Martin Blumenstingl New
[3/6] pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: various fixes for Meson8 and Meson8b SoCs - - - --- 2018-12-09 Martin Blumenstingl New
[2/6] pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins pinctrl: various fixes for Meson8 and Meson8b SoCs - - - --- 2018-12-09 Martin Blumenstingl New
[1/6] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins pinctrl: various fixes for Meson8 and Meson8b SoCs - - - --- 2018-12-09 Martin Blumenstingl New
[5/5] ARM: dts: meson8b: add the Mali-450 MP2 GPU Meson (32-bit): add support for the Mali GPU - - - --- 2018-12-08 Martin Blumenstingl New
[4/5] ARM: dts: meson8: add the Mali-450 MP6 GPU Meson (32-bit): add support for the Mali GPU - - - --- 2018-12-08 Martin Blumenstingl New
[3/5] clk: meson: meson8b: add the GPU clock tree Meson (32-bit): add support for the Mali GPU - 1 - --- 2018-12-08 Martin Blumenstingl New
[2/5] clk: meson: meson8b: use a separate clock table for Meson8 Meson (32-bit): add support for the Mali GPU - 1 - --- 2018-12-08 Martin Blumenstingl New
[1/5] dt-bindings: gpu: mali-utgard: add Amlogic Meson8 and Meson8b compatible Meson (32-bit): add support for the Mali GPU - 1 - --- 2018-12-08 Martin Blumenstingl New
[v2,3/3] ARM: dts: meson8b: add the APB bus ARM: dts: meson: add the APB/APB2 busses - - - --- 2018-12-08 Martin Blumenstingl Mainlined
[v2,2/3] ARM: dts: meson8: add the APB bus ARM: dts: meson: add the APB/APB2 busses - - - --- 2018-12-08 Martin Blumenstingl Mainlined
[v2,1/3] ARM: dts: meson6: add the APB2 bus ARM: dts: meson: add the APB/APB2 busses - - - --- 2018-12-08 Martin Blumenstingl Mainlined
[3/3] ARM: dts: meson8b: add the APB bus ARM: dts: meson: add the APB/APB2 busses - - - --- 2018-12-08 Martin Blumenstingl Mainlined
[3/3] ARM: dts: meson8b: add the ABP bus Untitled series #53771 - - - --- 2018-12-08 Martin Blumenstingl New
[2/3] ARM: dts: meson8: add the APB bus Untitled series #53769 - - - --- 2018-12-08 Martin Blumenstingl New
[2/3] ARM: dts: meson8: add the ABP bus ARM: dts: meson: add the APB/APB2 busses - - - --- 2018-12-08 Martin Blumenstingl Mainlined
[1/3] ARM: dts: meson6: add the APB2 bus ARM: dts: meson: add the APB/APB2 busses - - - --- 2018-12-08 Martin Blumenstingl Mainlined
[1/3] ARM: dts: meson6: add the ABP2 bus [1/3] ARM: dts: meson6: add the ABP2 bus - - - --- 2018-12-08 Martin Blumenstingl New
[v5,2/2] rtc: support for the Amlogic Meson RTC Amlogic Meson6/8/8b/8m2 SoC RTC driver - - - --- 2018-12-02 Martin Blumenstingl New
[v5,1/2] dt-bindings: rtc: add device-tree bindings for the Amlogic Meson RTC Amlogic Meson6/8/8b/8m2 SoC RTC driver - - - --- 2018-12-02 Martin Blumenstingl New
[3/3] clk: meson: meson8b: add the read-only video clock trees - clk: meson8b: add the (read-only) video clock trees - - - --- 2018-12-02 Martin Blumenstingl New
[2/3] clk: meson: meson8b: add the fractional divider for vid_pll_dco - clk: meson8b: add the (read-only) video clock trees - - - --- 2018-12-02 Martin Blumenstingl New
[1/3] clk: meson: meson8b: fix the offset of vid_pll_dco's N value - clk: meson8b: add the (read-only) video clock trees - - - --- 2018-12-02 Martin Blumenstingl New
[2/2] ARM: dts: meson: meson8b: add the CPU OPP tables ARM: dts: enable CPU frequency scaling on Meson8/Meson8b - - - --- 2018-11-29 Martin Blumenstingl New
[1/2] ARM: dts: meson: meson8: add the CPU OPP table ARM: dts: enable CPU frequency scaling on Meson8/Meson8b - - - --- 2018-11-29 Martin Blumenstingl New
[6/6] ARM: dts: meson8b: add the Cortex-A5 global timer 32-bit Meson: add the ARM TWD and Global Timers - - - --- 2018-11-23 Martin Blumenstingl New
[5/6] ARM: dts: meson8b: add the ARM TWD timer 32-bit Meson: add the ARM TWD and Global Timers - - - --- 2018-11-23 Martin Blumenstingl New
[4/6] ARM: dts: meson8: add the Cortex-A9 global timer 32-bit Meson: add the ARM TWD and Global Timers - - - --- 2018-11-23 Martin Blumenstingl New
[3/6] ARM: dts: meson8: add the ARM TWD timer 32-bit Meson: add the ARM TWD and Global Timers - - - --- 2018-11-23 Martin Blumenstingl New
[2/6] ARM: dts: meson: group the Cortex-A5 / Cortex-A9 peripherals 32-bit Meson: add the ARM TWD and Global Timers - - - --- 2018-11-23 Martin Blumenstingl New
[1/6] ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER 32-bit Meson: add the ARM TWD and Global Timers - - - --- 2018-11-23 Martin Blumenstingl New
[1/1] iio: adc: meson-saradc: fix internal clock names meson-saradc: fix internal clock names - - - --- 2018-11-22 Martin Blumenstingl New
[v2,4/4] clk: meson: meson8b: add the CPU clock post divider clocks Meson8b: add the CPU clock post-dividers 1 - - --- 2018-11-22 Martin Blumenstingl New
[v2,3/4] clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3 Meson8b: add the CPU clock post-dividers 1 - - --- 2018-11-22 Martin Blumenstingl New
[v2,2/4] clk: meson: clk-regmap: add read-only gate ops Meson8b: add the CPU clock post-dividers 1 - - --- 2018-11-22 Martin Blumenstingl New
[v2,1/4] dt-bindings: clock: meson8b: export the CPU post dividers Meson8b: add the CPU clock post-dividers 1 - - --- 2018-11-22 Martin Blumenstingl New
[3/3] clk: meson: meson8b: add the CPU clock post divider clocks Meson8b: add the CPU clock post-dividers - - - --- 2018-11-16 Martin Blumenstingl Superseded
[2/3] clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3 Meson8b: add the CPU clock post-dividers - - - --- 2018-11-16 Martin Blumenstingl Superseded
[1/3] dt-bindings: clock: meson8b: export the CPU post dividers Meson8b: add the CPU clock post-dividers - - - --- 2018-11-16 Martin Blumenstingl Superseded
[2/2] ARM: dts: meson: add the clock inputs for the Meson timer ARM: dts: meson: add the timer interrupts and clocks - - - --- 2018-11-16 Martin Blumenstingl New
[1/2] ARM: dts: meson: add the TIMER B/C/D interrupts ARM: dts: meson: add the timer interrupts and clocks - - - --- 2018-11-16 Martin Blumenstingl New
[v2,2/2] clocksource: meson6_timer: implement ARM delay timer clocksource/meson6_timer: implement ARM delay timer - - - --- 2018-11-15 Martin Blumenstingl New
[v2,1/2] clocksource: meson6_timer: use register names from the datasheet clocksource/meson6_timer: implement ARM delay timer - - - --- 2018-11-15 Martin Blumenstingl New
[v2,6/6] clk: meson: meson8b: allow changing the CPU clock tree Meson8b: make the CPU clock mutable - 1 - --- 2018-11-15 Martin Blumenstingl New
[v2,5/6] clk: meson: meson8b: run from the XTAL when changing the CPU frequency Meson8b: make the CPU clock mutable - 1 - --- 2018-11-15 Martin Blumenstingl New
[v2,4/6] clk: meson: meson8b: add support for more M/N values in sys_pll Meson8b: make the CPU clock mutable 1 - - --- 2018-11-15 Martin Blumenstingl New
[v2,3/6] clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL Meson8b: make the CPU clock mutable 1 - - --- 2018-11-15 Martin Blumenstingl New
[v2,2/6] clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel Meson8b: make the CPU clock mutable - 1 - --- 2018-11-15 Martin Blumenstingl New
[v2,1/6] clk: meson: clk-pll: check if the clock is already enabled Meson8b: make the CPU clock mutable - 1 - --- 2018-11-15 Martin Blumenstingl New
ARM: multi_v7_defconfig: switch CONFIG_PWM_MESON to built-in ARM: multi_v7_defconfig: switch CONFIG_PWM_MESON to built-in - - - --- 2018-11-14 Martin Blumenstingl New
[RFC,v1,7/7] clk: meson: meson8b: allow changing the CPU clock tree Meson8b: make the CPU clock mutable - 1 - --- 2018-11-14 Martin Blumenstingl Superseded
[RFC,v1,6/7] clk: meson: meson8b: add support for more M/N values in sys_pll Meson8b: make the CPU clock mutable 1 - - --- 2018-11-14 Martin Blumenstingl Superseded
[RFC,v1,5/7] clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL Meson8b: make the CPU clock mutable 1 - - --- 2018-11-14 Martin Blumenstingl Superseded
[RFC,v1,4/7] clk: meson: clk-pll: add the is_enabled function in the clk_ops Meson8b: make the CPU clock mutable - - - --- 2018-11-14 Martin Blumenstingl Superseded
[RFC,v1,3/7] clk: meson: clk-pll: check if the clock is already enabled Meson8b: make the CPU clock mutable - 1 - --- 2018-11-14 Martin Blumenstingl Superseded
[RFC,v1,2/7] clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel Meson8b: make the CPU clock mutable - 1 - --- 2018-11-14 Martin Blumenstingl Superseded
[RFC,v1,1/7] clk: meson: meson8b: run from the XTAL when changing the CPU frequency Meson8b: make the CPU clock mutable - 1 - --- 2018-11-14 Martin Blumenstingl Superseded
[2/2] clocksource: meson6_timer: implement ARM delay timer clocksource/meson6_timer: implement ARM delay timer - - - --- 2018-10-28 Martin Blumenstingl Superseded
[1/2] clocksource: meson6_timer: use register names from the datasheet clocksource/meson6_timer: implement ARM delay timer - - - --- 2018-10-28 Martin Blumenstingl Superseded
[v2,5/5] ARM: dts: meson8b: Add support for the Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-22 Martin Blumenstingl New
[v2,4/5] ARM: dts: meson8b: add the RMII pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-22 Martin Blumenstingl New
[v2,3/5] ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-22 Martin Blumenstingl New
[v2,2/5] dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-22 Martin Blumenstingl New
[v2,1/5] dt-bindings: add vendor prefix for "Endless Mobile, Inc." Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-22 Martin Blumenstingl New
[4/4] ARM: dts: meson8b: odroidc1: add stdout-path property Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl New
[3/4] ARM: dts: meson8b: odroidc1: enable the SAR ADC Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl New
[2/4] ARM: dts: meson8b: odroidc1: add the fixed voltage regulators Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl New
[1/4] ARM: dts: meson8b: odroidc1: add the CPU voltage regulator Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl New
[5/5] ARM: dts: meson8b: Add support for the Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-13 Martin Blumenstingl Superseded
[4/5] ARM: dts: meson8b: add the RMII pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-13 Martin Blumenstingl Superseded
[3/5] ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-13 Martin Blumenstingl Superseded
[2/5] dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-13 Martin Blumenstingl Superseded
[1/5] dt-bindings: add vendor prefix for "Endless Mobile, Inc." Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-13 Martin Blumenstingl Superseded
[3/3] ARM: dts: meson8b: add the ARM TWD timer - - - --- 2018-07-21 Martin Blumenstingl New
[2/3] ARM: dts: meson8: add the ARM TWD timer - - - --- 2018-07-21 Martin Blumenstingl New
[1/3] ARM: meson: select HAVE_ARM_TWD when SMP support is enabled - - - --- 2018-07-21 Martin Blumenstingl New
[1/3] soc: amlogic: Add Meson GX Clock Measure driver - - - --- 2018-07-03 Martin Blumenstingl New
[RfC,v1,5/5] ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini - - - --- 2018-06-24 Martin Blumenstingl New
[RfC,v1,4/5] ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board - WiP - - - --- 2018-06-24 Martin Blumenstingl New
[RfC,v1,3/5] dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini - 1 - --- 2018-06-24 Martin Blumenstingl New
[RfC,v1,2/5] dt-bindings: arm: amlogic: Add support for GXL S905W and the P281 board - 1 - --- 2018-06-24 Martin Blumenstingl New
[RfC,v1,1/5] dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co., Ltd. - 1 - --- 2018-06-24 Martin Blumenstingl New
[2/2] ARM: meson: merge Kconfig symbol MACH_MESON8B into MACH_MESON8 - - - --- 2018-05-20 Martin Blumenstingl New
[1/2] ARM: dts: meson: build the Meson8b .dtbs with MACH_MESON8 - - - --- 2018-05-20 Martin Blumenstingl New
[2/2] ARM: multi_v7_defconfig: enable the Meson PWM controller - - - --- 2018-04-22 Martin Blumenstingl New
[1/2] arm: multi_v7_defconfig: enable the Amlogic Meson I2C driver - - - --- 2018-04-22 Martin Blumenstingl New
« 1 2 ... 5 6 7 … 9 10 »