Show patches with: Submitter = Frank Li       |    State = Action Required       |   1127 patches
« 1 2 3 4 … 11 12 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v8,7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 2 - --- 2024-11-19 Frank Li New
[v8,6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 2 - --- 2024-11-19 Frank Li New
[v8,5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() 1 - - --- 2024-11-19 Frank Li New
[v8,4/7] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() 1 1 - --- 2024-11-19 Frank Li New
[v8,3/7] PCI: dwc: ep: Add bus_addr_base for outbound window PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 1 - --- 2024-11-19 Frank Li New
[v8,2/7] PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 1 - --- 2024-11-19 Frank Li New
[v8,1/7] of: address: Add parent_bus_addr to struct of_pci_range PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() 1 1 - --- 2024-11-19 Frank Li New
[v6,2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95 PCI: add enabe(disable)_device() hook for bridge 1 - - --- 2024-11-18 Frank Li New
[v6,1/2] PCI: Add enable_device() and disable_device() callbacks for bridges PCI: add enabe(disable)_device() hook for bridge 2 2 2 --- 2024-11-18 Frank Li New
[v4,3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 hwmon: tmp108: Add support for P3T1085 1 - - --- 2024-11-12 Frank Li New
[v4,2/3] hwmon: tmp108: Add support for I3C device hwmon: tmp108: Add support for P3T1085 - - - --- 2024-11-12 Frank Li New
[v4,1/3] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support hwmon: tmp108: Add support for P3T1085 - - - --- 2024-11-12 Frank Li New
[v3,5/5] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 hwmon: tmp108: Add support for P3T1085 - - - --- 2024-11-11 Frank Li New
[v3,4/5] hwmon: tmp108: Add support for I3C device hwmon: tmp108: Add support for P3T1085 - - - --- 2024-11-11 Frank Li New
[v3,3/5] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support hwmon: tmp108: Add support for P3T1085 - - - --- 2024-11-11 Frank Li New
[v3,2/5] hwmon: tmp108: Add NXP p3t1085 support hwmon: tmp108: Add support for P3T1085 - - - --- 2024-11-11 Frank Li New
[v3,1/5] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string hwmon: tmp108: Add support for P3T1085 1 - - --- 2024-11-11 Frank Li New
[v2,4/4] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 iio: temperature: Add support for P3T1085 - - - --- 2024-11-08 Frank Li New
[v2,3/4] hwmon: tmp108: Add support for I3C device iio: temperature: Add support for P3T1085 - - - --- 2024-11-08 Frank Li New
[v2,2/4] hwmon: tmp108: Add help function tmp108_common_probe() iio: temperature: Add support for P3T1085 - - - --- 2024-11-08 Frank Li New
[v2,1/4] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string iio: temperature: Add support for P3T1085 1 - - --- 2024-11-08 Frank Li New
[3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 iio: temperature: Add support for P3T1085 - - - --- 2024-11-07 Frank Li New
[2/3] iio: temperature: Add support for P3T1085 iio: temperature: Add support for P3T1085 - - - --- 2024-11-07 Frank Li New
[1/3] dt-bindings: trivial-devices: Add NXP P3T1085UK I3C/I2C temperature sensor iio: temperature: Add support for P3T1085 - - - --- 2024-11-07 Frank Li New
[v5,2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95 PCI: add enabe(disable)_device() hook for bridge 1 - - --- 2024-11-04 Frank Li New
[v5,1/2] PCI: Add enable_device() and disable_device() callbacks for bridges PCI: add enabe(disable)_device() hook for bridge 2 1 1 --- 2024-11-04 Frank Li New
[v4,2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95 PCI: add enabe(disable)_device() hook for bridge 1 - - --- 2024-11-01 Frank Li New
[v4,1/2] PCI: Add enable_device() and disable_device() callbacks for bridges PCI: add enabe(disable)_device() hook for bridge 1 1 1 --- 2024-11-01 Frank Li New
[v7,7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 2 - --- 2024-10-29 Frank Li New
[v7,6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 2 - --- 2024-10-29 Frank Li New
[v7,5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() 1 - - --- 2024-10-29 Frank Li New
[v7,4/7] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() 1 1 - --- 2024-10-29 Frank Li New
[v7,3/7] PCI: dwc: ep: Add bus_addr_base for outbound window PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 1 - --- 2024-10-29 Frank Li New
[v7,2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - - - --- 2024-10-29 Frank Li New
[v7,1/7] of: address: Add parent_bus_addr to struct of_pci_range PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() 1 1 - --- 2024-10-29 Frank Li New
[v2,1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes [v2,1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes - - - --- 2024-10-29 Frank Li New
[1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes [1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes - - - --- 2024-10-28 Frank Li New
[2/2] arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai ASoC: fsl-esai: allow fsl,imx8qm-esai fallback to fsl,imx6ull-esai 1 - - --- 2024-10-28 Frank Li New
[1/2] ASoC: dt-bindings: fsl-esai: allow fsl,imx8qm-esai fallback to fsl,imx6ull-esai ASoC: fsl-esai: allow fsl,imx8qm-esai fallback to fsl,imx6ull-esai 1 - - --- 2024-10-28 Frank Li New
[v6,7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 2 - --- 2024-10-28 Frank Li New
[v6,6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 2 - --- 2024-10-28 Frank Li New
[v6,5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() 1 - - --- 2024-10-28 Frank Li New
[v6,4/7] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - - - --- 2024-10-28 Frank Li New
[v6,3/7] PCI: dwc: ep: Add bus_addr_base for outbound window PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - - - --- 2024-10-28 Frank Li New
[v6,2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup() PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - - - --- 2024-10-28 Frank Li New
[v6,1/7] of: address: Add parent_bus_addr to struct of_pci_range PCI: dwc: opitimaze RC Host/EP pci_fixup_addr() - 1 - --- 2024-10-28 Frank Li New
[3/3] arm64: dts: imx8qm-ss-hsio: fix PCI and SATA clock indices [1/3] arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0 - - - --- 2024-10-25 Frank Li New
[2/3] arm64: dts: imx8qm-ss-hsio: fix interrupt-map indent under pci* nodes [1/3] arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0 - - - --- 2024-10-25 Frank Li New
[1/3] arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0 [1/3] arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0 - - - --- 2024-10-25 Frank Li New
[v3,2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95 PCI: add enabe(disable)_device() hook for bridge - - - --- 2024-10-24 Frank Li New
[v3,1/2] PCI: Add enable_device() and disable_device() callbacks for bridges PCI: add enabe(disable)_device() hook for bridge 1 - - --- 2024-10-24 Frank Li New
[v4,4/4] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - 2 - --- 2024-10-24 Frank Li New
[v4,3/4] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext() PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - 2 - --- 2024-10-24 Frank Li New
[v4,2/4] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices 1 - - --- 2024-10-24 Frank Li New
[v4,1/4] PCI: dwc: ep: Add bus_addr_base for outbound window PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - - - --- 2024-10-24 Frank Li New
[1/1] arm64: dts: imx8mn-bsh-smm-s2pro: remove undocument property 'clocks' for audio-codec@18 [1/1] arm64: dts: imx8mn-bsh-smm-s2pro: remove undocument property 'clocks' for audio-codec@18 - - - --- 2024-10-23 Frank Li New
[1/1] arm64: dts: imx8mq-librem5: remove undocument property 'extcon' for usb-pd@3f [1/1] arm64: dts: imx8mq-librem5: remove undocument property 'extcon' for usb-pd@3f - - - --- 2024-10-23 Frank Li New
[1/1] arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in G… [1/1] arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in G… - 1 - --- 2024-10-23 Frank Li New
[v1,1/1] arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor compatible string [v1,1/1] arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor compatible string - - - --- 2024-10-23 Frank Li New
[1/1] arm64: dts: imx8mp-kontron-dl: change touchscreen power-supply to AVDD28-supply [1/1] arm64: dts: imx8mp-kontron-dl: change touchscreen power-supply to AVDD28-supply - 1 - --- 2024-10-23 Frank Li New
[1/1] arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm mba8mx board file [1/1] arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm mba8mx board file - 1 - --- 2024-10-22 Frank Li New
[1/1] arm64: dts: freescale: mba8mx: remove undocument 'data-lanes' at panel [1/1] arm64: dts: freescale: mba8mx: remove undocument 'data-lanes' at panel - 1 - --- 2024-10-22 Frank Li New
[v3,4/4] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - 2 - --- 2024-10-21 Frank Li New
[v3,3/4] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext() PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - 2 - --- 2024-10-21 Frank Li New
[v3,2/4] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices 1 - - --- 2024-10-21 Frank Li New
[v3,1/4] PCI: dwc: ep: Add bus_addr_base for outbound window PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - - - --- 2024-10-21 Frank Li New
[v3,4/4] arm64: dts: imx8qm-mek: Add PCIe and SATA [v3,1/4] arm64: dts: imx8-ss-hsio: Add PCIe and SATA support - - - --- 2024-10-21 Frank Li New
[v3,3/4] arm64: dts: imx8qxp-mek: Add PCIe support [v3,1/4] arm64: dts: imx8-ss-hsio: Add PCIe and SATA support - - - --- 2024-10-21 Frank Li New
[v3,2/4] arm64: dts: imx8dxl-evk: Add PCIe support [v3,1/4] arm64: dts: imx8-ss-hsio: Add PCIe and SATA support - - - --- 2024-10-21 Frank Li New
[v3,1/4] arm64: dts: imx8-ss-hsio: Add PCIe and SATA support [v3,1/4] arm64: dts: imx8-ss-hsio: Add PCIe and SATA support - - - --- 2024-10-21 Frank Li New
[v2,6/6] arm64: dts: imx8qxp-mek: add cm4 and related nodes [v2,1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-10-21 Frank Li New
[v2,5/6] arm64: dts: imx8qxp-mek: add usbotg1 and related node [v2,1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-10-21 Frank Li New
[v2,4/6] arm64: dts: imx8qxp-mek: add flexcan1 and flexcan2 [v2,1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-10-21 Frank Li New
[v2,3/6] arm64: dts: imx8qxp-mek: enable jpeg encode and decode [v2,1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-10-21 Frank Li New
[v2,2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node [v2,1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-10-21 Frank Li New
[v2,1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec [v2,1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-10-21 Frank Li New
[v2,1/1] phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check [v2,1/1] phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check - - - --- 2024-10-21 Frank Li New
[1/1] arm64: dts: imx8mq-zii-ultra: remove #address-cells of eeprom@a4 [1/1] arm64: dts: imx8mq-zii-ultra: remove #address-cells of eeprom@a4 - - - --- 2024-10-18 Frank Li New
[1/1] arm64: dts: imx8mm-venice-gw73xx: remove compatible in overlay file [1/1] arm64: dts: imx8mm-venice-gw73xx: remove compatible in overlay file - - - --- 2024-10-18 Frank Li New
[v3,6/6] arm64: dts: imx93: add ddr edac support EDAC/fsl-ddr: Add imx9 support - - - --- 2024-10-16 Frank Li New
[v3,5/6] EDAC/fsl_ddr: Add support for i.MX9 DDR controller EDAC/fsl-ddr: Add imx9 support - 1 - --- 2024-10-16 Frank Li New
[v3,4/6] dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller EDAC/fsl-ddr: Add imx9 support - 1 - --- 2024-10-16 Frank Li New
[v3,3/6] EDAC/fsl_ddr: Fix bad bit shift operations EDAC/fsl-ddr: Add imx9 support - 1 - --- 2024-10-16 Frank Li New
[v3,2/6] EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata EDAC/fsl-ddr: Add imx9 support - - - --- 2024-10-16 Frank Li New
[v3,1/6] EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32() EDAC/fsl-ddr: Add imx9 support - - - --- 2024-10-16 Frank Li New
[v5,3/3] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-10-15 Frank Li New
[v5,2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-10-15 Frank Li New
[v5,1/3] of: address: Add parent_bus_addr to struct of_pci_range PCI: dwc: opitimaze RC host pci_fixup_addr() - 1 - --- 2024-10-15 Frank Li New
[v2,6/6] arm64: dts: imx93: add ddr edac support EDAC/fsl-ddr: Add imx9 support - - - --- 2024-10-11 Frank Li New
[v2,5/6] EDAC/fsl_ddr: Add support for i.MX9 DDR controller EDAC/fsl-ddr: Add imx9 support - 1 - --- 2024-10-11 Frank Li New
[v2,4/6] dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller EDAC/fsl-ddr: Add imx9 support - 1 - --- 2024-10-11 Frank Li New
[v2,3/6] EDAC/fsl_ddr: Fix bad bit shift operations EDAC/fsl-ddr: Add imx9 support - 1 - --- 2024-10-11 Frank Li New
[v2,2/6] EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata EDAC/fsl-ddr: Add imx9 support - - - --- 2024-10-11 Frank Li New
[v2,1/6] EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32() EDAC/fsl-ddr: Add imx9 support - - - --- 2024-10-11 Frank Li New
[v4,3/3] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-10-08 Frank Li New
[v4,2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-10-08 Frank Li New
[v4,1/3] of: address: Add parent_bus_addr to struct of_pci_range PCI: dwc: opitimaze RC host pci_fixup_addr() - 1 - --- 2024-10-08 Frank Li New
[v8,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle [v8,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle - 1 - --- 2024-10-08 Frank Li New
[v1,1/1] arm64: dts: layerscape: remove cooling-max-state and cooling-min-state [v1,1/1] arm64: dts: layerscape: remove cooling-max-state and cooling-min-state - - - --- 2024-10-07 Frank Li New
[v2,1/1] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property [v2,1/1] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property 1 1 - --- 2024-10-07 Frank Li New
« 1 2 3 4 … 11 12 »