Show patches with: Submitter = Jim Quinlan       |   153 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v4,5/5] PCI: brcmstb: Remove stale comment PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - - --- 2023-04-28 Jim Quinlan New
[v4,4/5] PCI: brcmstb: Don't assume 2711 bootloader leaves PERST# asserted PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - - --- 2023-04-28 Jim Quinlan New
[v4,3/5] PCI: brcmstb: Set PCIe transaction completion timeout PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - 1 --- 2023-04-28 Jim Quinlan New
[v4,2/5] PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - 1 --- 2023-04-28 Jim Quinlan New
[v4,1/5] dt-bindings: PCI: brcmstb: brcm,{enable-l1ss,completion-timeout-us} props PCI: brcmstb: Configure appropriate HW CLKREQ# mode - 1 - --- 2023-04-28 Jim Quinlan New
[v3,3/3] PCI: brcmstb: Set PCIe transaction completion timeout PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - 1 --- 2023-04-19 Jim Quinlan New
[v3,2/3] PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - 1 --- 2023-04-19 Jim Quinlan New
[v3,1/3] dt-bindings: PCI: brcmstb: brcm,{enable-l1ss,completion-timeout-us} props PCI: brcmstb: Configure appropriate HW CLKREQ# mode - 1 - --- 2023-04-19 Jim Quinlan New
[v2,3/3] PCI: brcmstb: Set PCIe transaction completion timeout PCI: brcmstb: CLKREQ# accomodations of downstream device - - - --- 2023-04-11 Jim Quinlan New
[v2,2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device PCI: brcmstb: CLKREQ# accomodations of downstream device - - - --- 2023-04-11 Jim Quinlan New
[v2,1/3] dt-bindings: PCI: brcmstb: Add two optional props PCI: brcmstb: CLKREQ# accomodations of downstream device - - - --- 2023-04-11 Jim Quinlan New
[v1,3/3] PCI: brcmstb: Allow setting the completion timeout PCI: brcmstb: Clkreq# accomodations of downstream device - - - --- 2023-04-06 Jim Quinlan New
[v1,2/3] PCI: brcmstb: Clkreq# accomodations of downstream device PCI: brcmstb: Clkreq# accomodations of downstream device - - - --- 2023-04-06 Jim Quinlan New
[v1,1/3] dt-bindings: PCI: brcmstb: Add two optional props PCI: brcmstb: Clkreq# accomodations of downstream device - - - --- 2023-04-06 Jim Quinlan New
[v2,5/5] PCI: brcmstb: Set RCB_{MPS,64B}_MODE bits PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-11 Jim Quinlan New
[v2,4/5] PCI: brcmstb: Functions needlessly specified as "inline" PCI: brcmstb: Add Multi-MSI and some improvements 1 1 - --- 2022-10-11 Jim Quinlan New
[v2,3/5] PCI: brcmstb: Replace status loops with read_poll_timeout_atomic() PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-11 Jim Quinlan New
[v2,2/5] PCI: brcmstb: Wait for 100ms following PERST# deassert PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-11 Jim Quinlan New
[v2,1/5] PCI: brcmstb: Enable Multi-MSI PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-11 Jim Quinlan New
[v1,5/5] PCI: brcmstb: Set RCB_{MPS,64B}_MODE bits PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-06 Jim Quinlan New
[v1,4/5] PCI: brcmstb: Functions needlessly specified as "inline" PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-06 Jim Quinlan New
[v1,3/5] PCI: brcmstb: Replace status loops with read_poll_timeout_atomic() PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-06 Jim Quinlan New
[v1,2/5] PCI: brcmstb: Wait for 100ms following PERST# deassert PCI: brcmstb: Add Multi-MSI and some improvements 1 - - --- 2022-10-06 Jim Quinlan New
[v1,1/5] PCI: brcmstb: Enable Multi-MSI PCI: brcmstb: Add Multi-MSI and some improvements 2 - - --- 2022-10-06 Jim Quinlan New
[v3,7/7] PCI: brcmstb: Have .map_bus function names end with 'map_bus' PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-25 Jim Quinlan New
[v3,6/7] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-25 Jim Quinlan New
[v3,5/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-25 Jim Quinlan New
[v3,4/7] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-25 Jim Quinlan New
[v3,3/7] PCI: brcmstb: Gate config space access on link status PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-25 Jim Quinlan New
[v3,2/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-25 Jim Quinlan New
[v3,1/7] PCI: brcmstb: Remove unnecessary forward declarations PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-25 Jim Quinlan New
[v2,6/6] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-16 Jim Quinlan New
[v2,5/6] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-16 Jim Quinlan New
[v2,4/6] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-16 Jim Quinlan New
[v2,3/6] PCI: brcmstb: Add "refusal mode" to preclude PCIe-induced CPU aborts PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-16 Jim Quinlan New
[v2,2/6] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-16 Jim Quinlan New
[v2,1/6] PCI: brcmstb: Remove unnecessary forward declarations PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-16 Jim Quinlan New
[v1,4/4] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-01 Jim Quinlan New
[v1,3/4] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-01 Jim Quinlan New
[v1,2/4] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-01 Jim Quinlan New
[v1,1/4] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: Re-submit reverted patchset - - - --- 2022-07-01 Jim Quinlan New
[v2,1/1] PCI: brcmstb: Fix regression regarding missing PCIe linkup PCI: brcmstb: Fix regression regarding missing PCIe linkup - - - --- 2022-05-28 Jim Quinlan New
[v1] PCI: brcmstb: Fix regression regarding missing PCIe linkup [v1] PCI: brcmstb: Fix regression regarding missing PCIe linkup - - - --- 2022-05-18 Jim Quinlan New
[v11,7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: root port turns on sub-device power - - - --- 2022-01-06 Jim Quinlan New
[v11,6/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: root port turns on sub-device power - - - --- 2022-01-06 Jim Quinlan New
[v11,5/7] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: root port turns on sub-device power - - - --- 2022-01-06 Jim Quinlan New
[v11,4/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: root port turns on sub-device power - - - --- 2022-01-06 Jim Quinlan New
[v11,3/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: root port turns on sub-device power 1 1 - --- 2022-01-06 Jim Quinlan New
[v11,2/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: root port turns on sub-device power 2 - - --- 2022-01-06 Jim Quinlan New
[v11,1/7] PCI: brcmstb: Fix function return value handling PCI: brcmstb: root port turns on sub-device power 1 - - --- 2022-01-06 Jim Quinlan New
[v10,7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: root port turns on sub-device power - - - --- 2021-12-09 Jim Quinlan New
[v10,6/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: root port turns on sub-device power - - - --- 2021-12-09 Jim Quinlan New
[v10,5/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: root port turns on sub-device power - - - --- 2021-12-09 Jim Quinlan New
[v10,3/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: root port turns on sub-device power - 1 - --- 2021-12-09 Jim Quinlan New
[v10,2/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: root port turns on sub-device power 2 - - --- 2021-12-09 Jim Quinlan New
[v10,1/7] PCI: brcmstb: Fix function return value handling PCI: brcmstb: root port turns on sub-device power 1 - - --- 2021-12-09 Jim Quinlan New
[v1,4/4] PCI: brcmstb: Augment driver for MIPs SOCs PCI: brcmstb: Augment driver for MIPs SOCs 1 - - --- 2021-12-09 Jim Quinlan New
[v1,1/4] dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs PCI: brcmstb: Augment driver for MIPs SOCs 2 - - --- 2021-12-09 Jim Quinlan New
[v9,7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: root port turns on sub-device power - - - --- 2021-11-19 Jim Quinlan New
[v9,6/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: root port turns on sub-device power - - - --- 2021-11-19 Jim Quinlan New
[v9,5/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: root port turns on sub-device power - - - --- 2021-11-19 Jim Quinlan New
[v9,3/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: root port turns on sub-device power - - - --- 2021-11-19 Jim Quinlan New
[v9,2/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: root port turns on sub-device power 2 - - --- 2021-11-19 Jim Quinlan New
[v9,1/7] PCI: brcmstb: Fix function return value handling PCI: brcmstb: root port turns on sub-device power - - - --- 2021-11-19 Jim Quinlan New
[v8,8/8] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: have portdrv turn on sub-device power - - - --- 2021-11-10 Jim Quinlan New
[v8,7/8] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: have portdrv turn on sub-device power - - - --- 2021-11-10 Jim Quinlan New
[v8,3/8] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: have portdrv turn on sub-device power - - - --- 2021-11-10 Jim Quinlan New
[v8,2/8] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: have portdrv turn on sub-device power 2 - - --- 2021-11-10 Jim Quinlan New
[v8,1/8] PCI: brcmstb: Change brcm_phy_stop() to return void PCI: brcmstb: have portdrv turn on sub-device power - - - --- 2021-11-10 Jim Quinlan New
[v7,7/7] PCI: brcmstb: Change brcm_phy_stop() to return void PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-11-03 Jim Quinlan New
[v7,6/7] PCI: brcmstb: Do not turn off regulators if EP can wake up PCI: brcmstb: have host-bridge turn on sub-device power - 1 - --- 2021-11-03 Jim Quinlan New
[v7,5/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-11-03 Jim Quinlan New
[v7,3/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-11-03 Jim Quinlan New
[v7,2/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-11-03 Jim Quinlan New
[v7,1/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: have host-bridge turn on sub-device power 2 - - --- 2021-11-03 Jim Quinlan New
[v6,9/9] PCI: brcmstb: change brcm_phy_stop() to return void PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-29 Jim Quinlan New
[v6,8/9] PCI: brcmstb: Do not turn off regulators if EP can wake up PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-29 Jim Quinlan New
[v6,7/9] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-29 Jim Quinlan New
[v6,6/9] PCI: brcmstb: split brcm_pcie_setup() into two funcs PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-29 Jim Quinlan New
[v6,2/9] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-29 Jim Quinlan New
[v6,1/9] dt-bindings: PCI: correct brcmstb interrupts, interrupt-map. PCI: brcmstb: have host-bridge turn on sub-device power 2 - - --- 2021-10-29 Jim Quinlan New
[v5,6/6] PCI: brcmstb: change brcm_phy_stop() to return void PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-22 Jim Quinlan New
[v5,5/6] PCI: brcmstb: Do not turn off regulators if EP can wake up PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-22 Jim Quinlan New
[v5,4/6] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-22 Jim Quinlan New
[v5,3/6] PCI: brcmstb: split brcm_pcie_setup() into two funcs PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-22 Jim Quinlan New
[v5,1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: have host-bridge turn on sub-device power - - - --- 2021-10-22 Jim Quinlan New
[v2,3/3] PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: Add panic handler 1 - - --- 2021-06-15 Jim Quinlan New
[v2,2/3] PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: Add panic handler 1 - - --- 2021-06-15 Jim Quinlan New
[v2,1/3] PCI: brcmstb: Check return value of clk_prepare_enable() PCI: brcmstb: Add panic handler 1 - - --- 2021-06-15 Jim Quinlan New
[v6,3/3] PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller 1 - - --- 2021-04-30 Jim Quinlan New
[v1,4/4] PCI: brcmstb: add shutdown call to driver PCI: brcmstb: Add panic handler and shutdown func 1 - - --- 2021-04-27 Jim Quinlan New
[v1,3/4] PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: Add panic handler and shutdown func 1 - - --- 2021-04-27 Jim Quinlan New
[v1,2/4] PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: Add panic handler and shutdown func 1 - - --- 2021-04-27 Jim Quinlan New
[v1,1/4] PCI: brcmstb: Check return value of clk_prepare_enable() PCI: brcmstb: Add panic handler and shutdown func 1 - - --- 2021-04-27 Jim Quinlan New
[v4,6/6] PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: add slot0 device regulators and panic handler 1 - - --- 2021-04-01 Jim Quinlan New
[v4,5/6] PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: add slot0 device regulators and panic handler 1 - - --- 2021-04-01 Jim Quinlan New
[v4,4/6] PCI: brcmstb: Do not turn off regulators if EP can wake up PCI: brcmstb: add slot0 device regulators and panic handler - - - --- 2021-04-01 Jim Quinlan New
[v4,3/6] PCI: brcmstb: Add control of slot0 device voltage regulators PCI: brcmstb: add slot0 device regulators and panic handler - - - --- 2021-04-01 Jim Quinlan New
[v4,2/6] dt-bindings: PCI: Add bindings for Brcmstb endpoint device voltage regulators PCI: brcmstb: add slot0 device regulators and panic handler - - - --- 2021-04-01 Jim Quinlan New
[v4,1/6] PCI: brcmstb: Check return value of clk_prepare_enable() PCI: brcmstb: add slot0 device regulators and panic handler 1 - - --- 2021-04-01 Jim Quinlan New
« 1 2 »