Show patches with: Submitter = Teresa Remmet       |   92 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[6/6] arm64: dts: imx8mp-phyboard-pollux: Add usb3_phy1 regulator reference arm64: dts phyBOARD-Pollux: Update regulator nodes - 1 - --- 2024-08-14 Teresa Remmet New
[5/6] arm64: dts: imx8mp-phyboard-pollux: Add VCC_5V_SW regulator arm64: dts phyBOARD-Pollux: Update regulator nodes - 1 - --- 2024-08-14 Teresa Remmet New
[4/6] arm64: dts: imx8mp-phyboard-pollux: Assign regulator to EEPROM node arm64: dts phyBOARD-Pollux: Update regulator nodes - 1 - --- 2024-08-14 Teresa Remmet New
[3/6] arm64: dts: imx8mp-phyboard-pollux: Add SD-Card vqmmc supply arm64: dts phyBOARD-Pollux: Update regulator nodes - 1 - --- 2024-08-14 Teresa Remmet New
[2/6] arm64: dts: imx8mp-phycore: Assign regulator to EEPROM node arm64: dts phyBOARD-Pollux: Update regulator nodes - 1 - --- 2024-08-14 Teresa Remmet New
[1/6] arm64: dts: imx8mp-phycore: Add VDD_IO regulator arm64: dts phyBOARD-Pollux: Update regulator nodes - 1 - --- 2024-08-14 Teresa Remmet New
[v2,7/7] arm64: dts: imx8mp-phyboard-pollux: Add missing usdhc clocks assignment Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-07-19 Teresa Remmet New
[v2,6/7] arm64: dts: imx8mp-phycore-som: Update regulator output voltages Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-07-19 Teresa Remmet New
[v2,5/7] arm64: dts: imx8mp-phycore-som: Add regulator names Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-07-19 Teresa Remmet New
[v2,4/7] arm64: dts: imx8mp-phycore-som: Remove LDO2 and LDO4 pmic nodes Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-07-19 Teresa Remmet New
[v2,3/7] arm64: dts: imx8mp-phycore-som: Correct pad settings Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-07-19 Teresa Remmet New
[v2,2/7] arm64: dts: imx8mp-phycore-som: Order properties alphabetically Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-07-19 Teresa Remmet New
[v2,1/7] arm64: dts: imx8mp-phycore-som: Remove eth phy interrupt Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-07-19 Teresa Remmet New
[7/7] arm64: dts: imx8mp-phyboard-pollux: Add missing usdhc clocks assignment Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-06-15 Teresa Remmet New
[6/7] arm64: dts: imx8mp-phycore-som: Update regulator output voltages Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-06-15 Teresa Remmet New
[5/7] arm64: dts: imx8mp-phycore-som: Add regulator names Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-06-15 Teresa Remmet New
[4/7] arm64: dts: imx8mp-phycore-som: Remove LDO2 and LDO4 pmic nodes Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-06-15 Teresa Remmet New
[3/7] arm64: dts: imx8mp-phycore-som: Correct pad settings Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-06-15 Teresa Remmet New
[2/7] arm64: dts: imx8mp-phycore-som: Order properties alphabetically Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-06-15 Teresa Remmet New
[1/7] arm64: dts: imx8mp-phycore-som: Remove eth phy interrupt Update for phyBOARD-Pollux-i.MX8MP - - - --- 2023-06-15 Teresa Remmet New
[v4,3/3] arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support [v4,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-23 Teresa Remmet New
[v4,2/3] arm64: defconfig: Enable gpio-fan support [v4,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-23 Teresa Remmet New
[v4,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings [v4,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings 1 - - --- 2022-06-23 Teresa Remmet New
[v3,3/3] arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support [v3,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-21 Teresa Remmet New
[v3,2/3] arm64: defconfig: Enable gpio-fan support [v3,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-21 Teresa Remmet New
[v3,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings [v3,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings 1 - - --- 2022-06-21 Teresa Remmet New
[v2,3/3] arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support [v2,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-02 Teresa Remmet New
[v2,2/3] arm64: defconfig: Enable gpio-fan support [v2,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-02 Teresa Remmet New
[v2,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings [v2,1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings 1 - - --- 2022-06-02 Teresa Remmet New
[3/3] arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support [1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-02 Teresa Remmet New
[2/3] arm64: defconfig: Enable gpio-fan support [1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings - - - --- 2022-06-02 Teresa Remmet New
[1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings [1/3] bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings 1 - - --- 2022-06-02 Teresa Remmet New
[v2,7/7] arm64: dts: imx8mp-phycore-som: Set usdhc root clock for eMMC arm64: dts: phyCORE-i.MX8MP SoM updates - 1 - --- 2022-02-18 Teresa Remmet New
[v2,6/7] arm64: dts: imx8mp-phycore-som: LDO5 needs to be enabled instead of LDO4 arm64: dts: phyCORE-i.MX8MP SoM updates - 1 - --- 2022-02-18 Teresa Remmet New
[v2,5/7] arm64: dts: imx8mp-phycore-som: Set VDD_ARM run and standby voltage arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-18 Teresa Remmet New
[v2,4/7] arm64: dts: imx8mp-phycore-som: Update WDOG muxing arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-18 Teresa Remmet New
[v2,3/7] arm64: dts: imx8mp-phycore-som: Reduce drive strength for fec tx lines arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-18 Teresa Remmet New
[v2,2/7] arm64: dts: imx8mp-phycore-som: Adapt eMMC drive strength arm64: dts: phyCORE-i.MX8MP SoM updates - 1 - --- 2022-02-18 Teresa Remmet New
[v2,1/7] arm64: dts: imx8mp-phycore-som: Set minimum output impedance for eth phy arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-18 Teresa Remmet New
[7/7] arm64: dts: imx8mp-phycore-som: Set usdhc clocks arm64: dts: phyCORE-i.MX8MP SoM updates - 1 - --- 2022-02-15 Teresa Remmet New
[6/7] arm64: dts: imx8mp-phycore-som: LDO5 needs to be enabled instead of LDO4 arm64: dts: phyCORE-i.MX8MP SoM updates - 1 - --- 2022-02-15 Teresa Remmet New
[5/7] arm64: dts: imx8mp-phycore-som: Set VDD_ARM run and standby voltage arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-15 Teresa Remmet New
[4/7] arm64: dts: imx8mp-phycore-som: Update WDOG muxing arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-15 Teresa Remmet New
[3/7] arm64: dts: imx8mp-phycore-som: Reduce drive strength for fec tx lines arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-15 Teresa Remmet New
[2/7] arm64: dts: imx8mp-phycore-som: Adapt eMMC drive strength arm64: dts: phyCORE-i.MX8MP SoM updates - 1 - --- 2022-02-15 Teresa Remmet New
[1/7] arm64: dts: imx8mp-phycore-som: Set minimum output impedance for eth phy arm64: dts: phyCORE-i.MX8MP SoM updates - - - --- 2022-02-15 Teresa Remmet New
[2/2] arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART [1/2] arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry - - - --- 2021-03-11 Teresa Remmet New
[1/2] arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry [1/2] arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry - - - --- 2021-03-11 Teresa Remmet New
[v4,4/4] arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2021-01-07 Teresa Remmet New
[v4,3/4] bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings Initial support for phyBOARD-Pollux i.MX8MP 1 1 - --- 2021-01-07 Teresa Remmet New
[v4,2/4] arm64: defconfig: Enable PCA9532 support Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2021-01-07 Teresa Remmet New
[v4,1/4] arm64: defconfig: Enable rv3028 i2c rtc driver Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2021-01-07 Teresa Remmet New
[v3,4/4] arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2020-12-11 Teresa Remmet New
[v3,3/4] bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings Initial support for phyBOARD-Pollux i.MX8MP 1 1 - --- 2020-12-11 Teresa Remmet New
[v3,2/4] arm64: defconfig: Enable PCA9532 support Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2020-12-11 Teresa Remmet New
[v3,1/4] arm64: defconfig: Enable rv3028 i2c rtc driver Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2020-12-11 Teresa Remmet New
[v2,4/4] arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2020-12-08 Teresa Remmet New
[v2,3/4] bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings Initial support for phyBOARD-Pollux i.MX8MP 1 1 - --- 2020-12-08 Teresa Remmet New
[v2,2/4] arm64: defconfig: Enable PCA9532 support Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2020-12-08 Teresa Remmet New
[v2,1/4] arm64: defconfig: Enable rv3028 i2c rtc driver Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2020-12-08 Teresa Remmet New
[4/4] arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP Initial support for phyBOARD-Pollux i.MX8MP - - - --- 2020-12-04 Teresa Remmet New
[3/4] bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings Initial support for phyBOARD-Pollux i.MX8MP - - - --- 2020-12-04 Teresa Remmet New
[2/4] arm64: defconfig: Enable PCA9532 support Initial support for phyBOARD-Pollux i.MX8MP - 1 - --- 2020-12-04 Teresa Remmet New
[1/4] arm64: defconfig: Enable rv3028 i2c rtc driver Initial support for phyBOARD-Pollux i.MX8MP - - - --- 2020-12-04 Teresa Remmet New
[7/7] ARM: dts: Add support for phyBOARD-REGOR-AM335x AM335x Phytec boards update - - - --- 2019-05-24 Teresa Remmet New
[6/7] ARM: dts: am335x-pcm-953: Remove eth phy delay AM335x Phytec boards update - - - --- 2019-05-24 Teresa Remmet New
[5/7] ARM: dts: am335x-pcm-953: Update user led names AM335x Phytec boards update - - - --- 2019-05-24 Teresa Remmet New
[4/7] ARM: dts: am335x-phycore-som: Enable gpmc node in dts files AM335x Phytec boards update - - - --- 2019-05-24 Teresa Remmet New
[3/7] ARM: dts: am335x-phycore-som: Add emmc node AM335x Phytec boards update - - - --- 2019-05-24 Teresa Remmet New
[2/7] ARM: dts: am335x phytec boards: Remove regulator node AM335x Phytec boards update - - - --- 2019-05-24 Teresa Remmet New
[1/7] ARM: dts: am335x phytec boards: Fix cd-gpios active level AM335x Phytec boards update - - - --- 2019-05-24 Teresa Remmet New
ARM: dts: am335x-pcm953: Fix legacy wakeup source binding - - - --- 2017-02-10 Teresa Remmet New
[v2,3/3] ARM: configs: omap2plus_defconfig: Enable support for RTC M41T80 - - - --- 2017-01-24 Teresa Remmet New
[v2,2/3] ARM: configs: omap2plus_defconfig: Enable support for micrell phys - - - --- 2017-01-24 Teresa Remmet New
[v2,1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board 1 1 - --- 2017-01-24 Teresa Remmet New
[3/3] ARM: configs: omap2plus_defconfig: Enable support for RTC M41T80 - - - --- 2017-01-19 Teresa Remmet New
[2/3] ARM: configs: omap2plus_defconfig: Enable support for micrell phys - - - --- 2017-01-19 Teresa Remmet New
[1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board 1 1 - --- 2017-01-19 Teresa Remmet New
ARM: dts: am335x-phycore-som: Remove partition tables - - - --- 2017-01-09 Teresa Remmet New
[6/6] ARM: dts: am335x-wega: Update ethernet phy node - - - --- 2017-01-05 Teresa Remmet New
[5/6] ARM: dts: am335x-phycore-som: Update ethernet phy node - - - --- 2017-01-05 Teresa Remmet New
[4/6] ARM: dts: am335x-wega: Set USB0 mode to otg - - - --- 2017-01-05 Teresa Remmet New
[3/6] ARM: dts: am335x-phycore-som: Add i2c temp sensor - - - --- 2017-01-05 Teresa Remmet New
[2/6] ARM: dts: am335x-phycore-som: Update compatible string for spi nor - - - --- 2017-01-05 Teresa Remmet New
[1/6] ARM: dts: am335x-phycore-som: Update NAND partition table - - - --- 2017-01-05 Teresa Remmet New
[RESEND] ARM: dts: am335x: Update elm phandle binding 1 - - --- 2016-07-19 Teresa Remmet New
[2/2] mtd: nand: omap2: Add check for old elm binding - - - --- 2016-07-05 Teresa Remmet New
[1/2] ARM: dts: am335x: Update elm phandle binding 2 - - --- 2016-07-05 Teresa Remmet New
[2/2] ARM: dts: am335x-wega: Clean up regulators - - - --- 2015-09-03 Teresa Remmet New
[1/2] ARM: dts: am335x-phycore-som: Fix mpu voltage - - - --- 2015-09-03 Teresa Remmet New
[2/2] ARM: dts: Add phyBOARD-WEGA-AM335x rdk - - - --- 2015-07-16 Teresa Remmet New
[1/2] ARM: dts: Add support for phyCORE-AM335x SoM - - - --- 2015-07-16 Teresa Remmet New