Show patches with: Submitter = Juergen Borleis       |   92 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
dma: imx-dma: configure the generic DMA type to make it work dma: imx-dma: configure the generic DMA type to make it work - - - --- 2021-07-29 Juergen Borleis New
[9/9] ARM: dts: TQma53: describe the full power supply tree - - - --- 2017-09-07 Juergen Borleis New
[8/9] ARM: dts: TQma53: move network phy reset GPIO where it belongs to - - - --- 2017-09-07 Juergen Borleis New
[7/9] ARM: dts: TQma53: move PMIC's IRQ pin control where it belongs to - - - --- 2017-09-07 Juergen Borleis New
[6/9] ARM: dts: TQma53: fix and move regulator to its correct location - - - --- 2017-09-07 Juergen Borleis New
[5/9] ARM: dts: TQma53: define eMMC's power supply - - - --- 2017-09-07 Juergen Borleis New
[4/9] ARM: dts: TQma53: ESDHC2: use correct IO lines power supply - - - --- 2017-09-07 Juergen Borleis New
[3/9] ARM: dts: TQma53: define IRQ's active level by macro instead of anonymous number - - - --- 2017-09-07 Juergen Borleis New
[2/9] ARM: dts: TQma53: define GPIO's active level by macro instead of anonymous number - - - --- 2017-09-07 Juergen Borleis New
[1/9] ARM: dts: TQma53: regulators are no bus - - - --- 2017-09-07 Juergen Borleis New
[v4,2/2] serial: mxs-auart: keep the AUART unit in reset state when not in use - - - --- 2015-08-07 Juergen Borleis New
[v4,1/2] serial: mxs-auart: use a function name to reflect what it really does - - - --- 2015-08-07 Juergen Borleis New
[v3] serial: mxs-auart: keep the AUART unit in reset state when not in use - - - --- 2015-07-16 Juergen Borleis New
[v2] serial: mxs-auart: keep the AUART unit in reset state when not in use - - - --- 2015-07-15 Juergen Borleis New
serial: mxs-auart: keep the AUART unit in reset state when not in use - - - --- 2015-07-14 Juergen Borleis New
ASoC: fsl-ssi: Fix bitclock calculation for master mode - - - --- 2015-07-03 Juergen Borleis New
[6/6] RTC/i.MX/DryIce: prepare to force a security violation - - - --- 2015-04-27 Juergen Borleis New
[5/6] RTC/i.MX/DryIce: when locked, do not fail silently - - - --- 2015-04-27 Juergen Borleis New
[4/6] RTC/i.MX/DryIce: monitor a security violation at runtime - - - --- 2015-04-27 Juergen Borleis New
[3/6] RTC/i.MX/DryIce: add the unit recovery code - - - --- 2015-04-27 Juergen Borleis New
[2/6] RTC/i.MX/DryIce: add some background info about the states the machine can be in - - - --- 2015-04-27 Juergen Borleis New
[1/6] RTC/i.MX/DryIce: avoid the __raw* register access functions - - - --- 2015-04-27 Juergen Borleis New
[5/5] RTC/i.MX/DryIce: prepare to force a security violation - - - --- 2015-04-14 Juergen Borleis New
[4/5] RTC/i.MX/DryIce: when locked, do not fail silently - - - --- 2015-04-14 Juergen Borleis New
[3/5] RTC/i.MX/DryIce: monitor a security violation at runtime - - - --- 2015-04-14 Juergen Borleis New
[2/5] RTC/i.MX/DryIce: add the unit recovery code - - - --- 2015-04-14 Juergen Borleis New
[1/5] RTC/i.MX/DryIce: add some background info about the states the machine can be in - - - --- 2015-04-14 Juergen Borleis New
[5/5] RTC/i.MX/DryIce: prepare to force a security violation - - - --- 2015-04-14 Juergen Borleis New
[4/5] RTC/i.MX/DryIce: when locked, do not fail silently - - - --- 2015-04-14 Juergen Borleis New
[3/5] RTC/i.MX/DryIce: monitor a security violation at runtime - - - --- 2015-04-14 Juergen Borleis New
[2/5] RTC/i.MX/DryIce: add the unit recovery code - - - --- 2015-04-14 Juergen Borleis New
[1/5] RTC/i.MX/DryIce: add some background info about the states the machine can be in - - - --- 2015-04-14 Juergen Borleis New
DTS/TX25: add missing indention - - - --- 2015-03-30 Juergen Borleis New
[RFC] i.MX25/35/SDHCI: switch off DMA usage - - - --- 2015-03-27 Juergen Borleis New
ARM: dts: Fix wrong SoC type to build devicetrees for i.MX27 - - - --- 2015-03-27 Juergen Borleis New
staging/iio/adc/MXS/LRADC: fix touchscreen statemachine - - - --- 2014-02-24 Juergen Borleis New
[PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation - - - --- 2014-02-24 Juergen Borleis New
[alsa-devel] ASoC: fsl-ssi: fix SDMA starvation - - - --- 2013-11-13 Juergen Borleis New
ARM/Samsung/S3C24xx: Linux-3.11 crashes when using PWM - - - --- 2013-09-25 Juergen Borleis New
[1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling - - - --- 2013-09-24 Juergen Borleis New
[9/9] Staging/iio: add TODO reminder - - - --- 2013-09-23 Juergen Borleis New
[8/9] Staging/iio/adc/touchscreen/MXS: provide devicetree adaption - - - --- 2013-09-23 Juergen Borleis New
[7/9] Staging/iio/adc/touchscreen/MXS: remove old touchscreen detection implementation - - - --- 2013-09-23 Juergen Borleis New
[6/9] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection - - - --- 2013-09-23 Juergen Borleis New
[5/9] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver - - - --- 2013-09-23 Juergen Borleis New
[4/9] Staging/iio/adc/touchscreen/MXS: simplify register access - - - --- 2013-09-23 Juergen Borleis New
[3/9] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits - - - --- 2013-09-23 Juergen Borleis New
[2/9] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC - - - --- 2013-09-23 Juergen Borleis New
[1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling - - - --- 2013-09-23 Juergen Borleis New
[7/7] Staging/iio/adc/touchscreen/MXS: provide devicetree adaption - - - --- 2013-09-19 Juergen Borleis New
[6/7] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation - - - --- 2013-09-19 Juergen Borleis New
[5/7] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection - - - --- 2013-09-19 Juergen Borleis New
[4/7] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver - - - --- 2013-09-19 Juergen Borleis New
[3/7] Staging/iio/adc/touchscreen/MXS: simplify register access - - - --- 2013-09-19 Juergen Borleis New
[2/7] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits - - - --- 2013-09-19 Juergen Borleis New
[1/7] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC - - - --- 2013-09-19 Juergen Borleis New
[5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection - - - --- 2013-09-16 Juergen Borleis New
[6/6] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation - - - --- 2013-09-11 Juergen Borleis New
[5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection - - - --- 2013-09-11 Juergen Borleis New
[4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver - - - --- 2013-09-11 Juergen Borleis New
[3/6] Staging/iio/adc/touchscreen/MXS: simplify register access - - - --- 2013-09-11 Juergen Borleis New
[2/6] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits - - - --- 2013-09-11 Juergen Borleis New
[1/6] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC - - - --- 2013-09-11 Juergen Borleis New
[5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation - - - --- 2013-09-09 Juergen Borleis New
[4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection - - - --- 2013-09-09 Juergen Borleis New
[3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver - - - --- 2013-09-09 Juergen Borleis New
[2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits - - - --- 2013-09-09 Juergen Borleis New
[1/5] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC - - - --- 2013-09-09 Juergen Borleis New
[5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation - - - --- 2013-09-06 Juergen Borleis New
[4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection - - - --- 2013-09-06 Juergen Borleis New
[3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver - - - --- 2013-09-06 Juergen Borleis New
[2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits - - - --- 2013-09-06 Juergen Borleis New
[1/5] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC - - - --- 2013-09-06 Juergen Borleis New
[5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation - - - --- 2013-09-04 Juergen Borleis New
[4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection - - - --- 2013-09-04 Juergen Borleis New
[3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver - - - --- 2013-09-04 Juergen Borleis New
[2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits - - - --- 2013-09-04 Juergen Borleis New
[1/5] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC - - - --- 2013-09-04 Juergen Borleis New
[2/2] ARM: dts: imx28: Adjust i2c interrupt bindings - - - --- 2013-05-22 Juergen Borleis New
Sound/ARM/i.MX/SSI: fix SDMA starvation - - - --- 2013-01-24 Juergen Borleis New
[09/10] MACH/Samsung/Mini2440: enable buzzer - - - --- 2012-07-08 Juergen Borleis New
[01/10] Sound/ARM/Samsung: replace wrong dependency - - - --- 2012-07-08 Juergen Borleis New
[10/10] MACH/Samsung/Mini2440: update the default config - - - --- 2012-07-08 Juergen Borleis New
[09/10] MACH/Samsung/Mini2440: enable buzzer - - - --- 2012-07-08 Juergen Borleis New
[08/10] MACH/Samsung/Mini2440: enable button 6 as one of the GPIO keys - - - --- 2012-07-08 Juergen Borleis New
[07/10] MACH/Samsung/Mini2440: add hwmon capabilities to mini2440 - - - --- 2012-07-08 Juergen Borleis New
[06/10] MACH/Samsung/Mini2440: use leds-gpio driver for board leds - - - --- 2012-07-08 Juergen Borleis New
[05/10] MACH/Samsung/Mini2440: select touchscreen by default. - - - --- 2012-07-08 Juergen Borleis New
[04/10] MACH/Samsung/Mini2440: add touchscreen support for mini2440. - - - --- 2012-07-08 Juergen Borleis New
[03/10] MACH/Samsung/Mini2440: add support for new LCD panels. - - - --- 2012-07-08 Juergen Borleis New
[02/10] PLAT/Samsung/PWM: avoid division by zero - - - --- 2012-07-08 Juergen Borleis New
[01/10] Sound/ARM/Samsung: replace wrong dependency - - - --- 2012-07-08 Juergen Borleis New