Show patches with: Submitter = Peter Rosin       |    State = Action Required       |   180 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,2/2] dmaengine: at_hdmac: Extend the Flow Controller bitfield to three bits dmaengine: at_hdmac: Regression fix and cleanup - 1 - --- 2023-05-23 Peter Rosin New
[v2,1/2] dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling dmaengine: at_hdmac: Regression fix and cleanup - 1 - --- 2023-05-23 Peter Rosin New
[2/2] dmaengine: at_hdmac: Remove unused field values that do not fit dmaengine: at_hdmac: Regression fix and cleanup - 1 - --- 2023-05-23 Peter Rosin New
[1/2] dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling dmaengine: at_hdmac: Regression fix and cleanup - - - --- 2023-05-23 Peter Rosin New
ARM: dts: at91: tse850: add properties for gpio-line-names ARM: dts: at91: tse850: add properties for gpio-line-names - - - --- 2023-04-28 Peter Rosin New
ARM: at91: fix build for SAMA5D3 w/o L2 cache ARM: at91: fix build for SAMA5D3 w/o L2 cache - - - --- 2022-11-12 Peter Rosin New
pinctrl: at91: allow use of of gpio-line-names property pinctrl: at91: allow use of of gpio-line-names property - - - --- 2021-12-06 Peter Rosin New
ARM: dts: at91: tse850: the emac<->phy interface is rmii ARM: dts: at91: tse850: the emac<->phy interface is rmii 1 - - --- 2021-09-20 Peter Rosin New
[4/4] drm/atmel-hlcdc: do not immediately disable planes, wait for next frame drm/atmel-hlcdc: fix plane clipping/rotation issues - - - --- 2019-01-10 Peter Rosin New
[3/4] drm/atmel-hlcdc: fix clipping of planes drm/atmel-hlcdc: fix plane clipping/rotation issues - - - --- 2019-01-10 Peter Rosin New
[2/4] drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated drm/atmel-hlcdc: fix plane clipping/rotation issues - - - --- 2019-01-10 Peter Rosin New
[1/4] drm/atmel-hlcdc: rotate planes counterclockwise drm/atmel-hlcdc: fix plane clipping/rotation issues - - - --- 2019-01-10 Peter Rosin New
drm/atmel-hlcdc: prevent divide by zero drm/atmel-hlcdc: prevent divide by zero - - - --- 2019-01-08 Peter Rosin New
ARM: dts: at91: nattis: initialize the BLON pin as output-low early ARM: dts: at91: nattis: initialize the BLON pin as output-low early - - - --- 2018-11-20 Peter Rosin New
[2/2] ARM: dts: at91: tse850: drop three indentation levels ARM: dts: at91: nattis/tse850: drop 3 indentation levels - - - --- 2018-08-31 Peter Rosin New
[1/2] ARM: dts: at91: nattis: drop three indentation levels ARM: dts: at91: nattis/tse850: drop 3 indentation levels - - - --- 2018-08-31 Peter Rosin New
[5/5] ARM: dts: at91: nattis: describe the lvds panel ARM: dts: at91: nattis: some cleanup - - - --- 2018-08-28 Peter Rosin New
[4/5] ARM: dts: at91: nattis: move pinctrls for the lvds chip to the lvds node ARM: dts: at91: nattis: some cleanup - - - --- 2018-08-28 Peter Rosin New
[3/5] ARM: dts: at91: nattis: state the actual lvds-encoder chip ARM: dts: at91: nattis: some cleanup - - - --- 2018-08-28 Peter Rosin New
[2/5] ARM: dts: at91: nattis: make the SD-card slot work ARM: dts: at91: nattis: some cleanup - - - --- 2018-08-28 Peter Rosin New
[1/5] ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low ARM: dts: at91: nattis: some cleanup - - - --- 2018-08-28 Peter Rosin New
[v9,4/4] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes drm/atmel-hlcdc: bus-width override support 1 1 - --- 2018-08-25 Peter Rosin New
[v9,3/4] drm/atmel-hlcdc: always iterate over the first 4 output endpoints drm/atmel-hlcdc: bus-width override support - - - --- 2018-08-25 Peter Rosin New
[v9,2/4] dt-bindings: display: atmel: optional video-interface of endpoints drm/atmel-hlcdc: bus-width override support 1 2 - --- 2018-08-25 Peter Rosin New
[v9,1/4] dt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185 drm/atmel-hlcdc: bus-width override support - 2 - --- 2018-08-25 Peter Rosin New
[v2,2/2] drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested drm/atmel-hlcdc: revise selection of pixel-clock frequency divider - - - --- 2018-08-24 Peter Rosin New
[v2,1/2] drm/atmel-hlcdc: prefer a higher rate clock as pixel-clock base drm/atmel-hlcdc: revise selection of pixel-clock frequency divider - - - --- 2018-08-24 Peter Rosin New
[2/2] drm/atmel-hlcdc: allow selecting a higher pixel-clock that requested drm/atmel-hlcdc: revise selection of pixel-clock frequency divider - - - --- 2018-08-24 Peter Rosin New
[1/2] drm/atmel-hlcdc: prefer a higher rate clock as pixel-clock base drm/atmel-hlcdc: revise selection of pixel-clock frequency divider - - - --- 2018-08-24 Peter Rosin New
ASoC: atmel: tse850: switch to SPDX license identifier ASoC: atmel: tse850: switch to SPDX license identifier - - - --- 2018-08-20 Peter Rosin New
[v8,4/4] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes drm/atmel-hlcdc: bus-width override support 1 1 - --- 2018-08-10 Peter Rosin New
[v8,3/4] drm/atmel-hlcdc: iterate over all output endpoints drm/atmel-hlcdc: bus-width override support - 1 - --- 2018-08-10 Peter Rosin New
[v8,2/4] dt-bindings: display: atmel: optional video-interface of endpoints drm/atmel-hlcdc: bus-width override support 1 2 - --- 2018-08-10 Peter Rosin New
[v8,1/4] dt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185 drm/atmel-hlcdc: bus-width override support - 2 - --- 2018-08-10 Peter Rosin New
[v7,3/3] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes drm/atmel-hlcdc: bus-width override support 1 1 - --- 2018-08-04 Peter Rosin New
[v7,2/3] dt-bindings: display: atmel: optional video-interface of endpoints drm/atmel-hlcdc: bus-width override support 1 2 - --- 2018-08-04 Peter Rosin New
[v7,1/3] dt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185 drm/atmel-hlcdc: bus-width override support - 2 - --- 2018-08-04 Peter Rosin New
[v6,3/3] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes drm/atmel-hlcdc: bus-width override support 1 1 - --- 2018-08-03 Peter Rosin New
[v6,2/3] dt-bindings: display: atmel: optional video-interface of endpoints drm/atmel-hlcdc: bus-width override support 1 2 - --- 2018-08-03 Peter Rosin New
[v6,1/3] dt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185 drm/atmel-hlcdc: bus-width override support - 2 - --- 2018-08-03 Peter Rosin New
[RESEND,v5,3/3] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes drm/atmel-hlcdc: bus-width override support 1 1 - --- 2018-08-03 Peter Rosin New
[RESEND,v5,2/3] dt-bindings: display: atmel: optional video-interface of endpoints drm/atmel-hlcdc: bus-width override support 1 2 - --- 2018-08-03 Peter Rosin New
[RESEND,v5,1/3] dt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185 drm/atmel-hlcdc: bus-width override support - 2 - --- 2018-08-03 Peter Rosin New
[v2,10/10] i2c: remove i2c_lock_adapter and use i2c_lock_bus directly - - 1 --- 2018-06-20 Peter Rosin New
[v2,09/10] mfd: 88pm860x-i2c: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) 1 - - --- 2018-06-20 Peter Rosin New
[v2,08/10] media: tda18271: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) - - - --- 2018-06-20 Peter Rosin New
[v2,07/10] media: tda1004x: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) - - - --- 2018-06-20 Peter Rosin New
[v2,06/10] media: rtl2830: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) - - - --- 2018-06-20 Peter Rosin New
[v2,05/10] media: drxk_hard: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) - - - --- 2018-06-20 Peter Rosin New
[v2,04/10] media: af9013: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) - - - --- 2018-06-20 Peter Rosin New
[v2,03/10] input: rohm_bu21023: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) 1 - - --- 2018-06-20 Peter Rosin New
[v2,02/10] i2c: mux: pca9541: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) - - - --- 2018-06-20 Peter Rosin New
[v2,01/10] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) - 1 1 --- 2018-06-20 Peter Rosin New
[11/11] i2c: rename i2c_lock_adapter to i2c_lock_root - - - --- 2018-06-15 Peter Rosin New
[10/11] mfd: 88pm860x-i2c: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[09/11] media: tda18271: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[08/11] media: tda1004x: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[07/11] media: rtl2830: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[06/11] media: drxk_hard: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[05/11] media: af9013: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[04/11] input: rohm_bu21023: switch to i2c_lock_segment 1 - - --- 2018-06-15 Peter Rosin New
[03/11] i2c: mux: pca9541: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[02/11] tpm/tpm_i2c_infineon: switch to i2c_lock_segment - - - --- 2018-06-15 Peter Rosin New
[01/11] i2c: add helpers for locking the I2C segment - - - --- 2018-06-15 Peter Rosin New
mtd: nand: raw: atmel: add module param to avoid using dma - - - --- 2018-05-28 Peter Rosin New
mtd: nand: raw: atmel: add module param to avoid using dma - - - --- 2018-05-27 Peter Rosin New
[v5,7/7] drm/i2c: tda998x: register as a drm bridge - - - --- 2018-05-23 Peter Rosin New
[v5,6/7] drm/i2c: tda998x: split encoder and component functions from the work - - - --- 2018-05-23 Peter Rosin New
[v5,5/7] drm/i2c: tda998x: split tda998x_encoder_dpms into enable/disable - - - --- 2018-05-23 Peter Rosin New
[v5,4/7] drm/i2c: tda998x: find the drm_device via the drm_connector - 1 - --- 2018-05-23 Peter Rosin New
[v5,3/7] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes 1 - - --- 2018-05-23 Peter Rosin New
[v5,2/7] dt-bindings: display: atmel: optional video-interface of endpoints 1 1 - --- 2018-05-23 Peter Rosin New
[v5,1/7] dt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185 - 2 - --- 2018-05-23 Peter Rosin New
[v3,26/26] drm/bridge: establish a link between the bridge supplier and consumer 1 1 - --- 2018-05-16 Peter Rosin New
[v3,25/26] drm/bridge: require the owner .odev to be filled in on drm_bridge_add/attach 1 1 - --- 2018-05-16 Peter Rosin New
[v3,24/26] drm/bridge: remove the .of_node member 2 - - --- 2018-05-16 Peter Rosin New
[v3,20/26] drm/mediatek: hdmi: provide an owner .odev device for the bridge 1 - - --- 2018-05-16 Peter Rosin New
[v3,19/26] drm/exynos: mic: provide an owner .odev device for the bridge - - - --- 2018-05-16 Peter Rosin New
[v3,01/26] drm/bridge: allow optionally specifying an owner .odev device 2 1 - --- 2018-05-16 Peter Rosin New
[v2,2/2] i2c: busses: make use of i2c_8bit_addr_from_msg 2 1 - --- 2018-05-16 Peter Rosin New
[v2,1/2] i2c: algos: make use of i2c_8bit_addr_from_msg - - - --- 2018-05-16 Peter Rosin New
[20/21] i2c: stu300: make use of i2c_8bit_addr_from_msg 1 - - --- 2018-05-14 Peter Rosin New
[07/21] i2c: efm32: make use of i2c_8bit_addr_from_msg 1 - - --- 2018-05-14 Peter Rosin New
[04/21] i2c: aspeed: make use of i2c_8bit_addr_from_msg - - - --- 2018-05-14 Peter Rosin New
[v2,01/26] drm/bridge: allow optionally specifying an owner .odev device - 1 - --- 2018-05-09 Peter Rosin New
[2/2] i2c: exynos5: remove pointless initializers - - - --- 2018-05-09 Peter Rosin New
[1/2] i2c: exynos5: remove some dead code - 1 - --- 2018-05-09 Peter Rosin New
[v2,26/26] drm/bridge: establish a link between the bridge supplier and consumer 1 1 - --- 2018-05-04 Peter Rosin New
[v2,25/26] drm/bridge: require the owner .odev to be filled in on drm_bridge_add/attach - 1 - --- 2018-05-04 Peter Rosin New
[v2,24/26] drm/bridge: remove the .of_node member - - - --- 2018-05-04 Peter Rosin New
[v2,20/26] drm/mediatek: hdmi: provide an owner .odev device for the bridge - - - --- 2018-05-04 Peter Rosin New
[v2,19/26] drm/exynos: mic: provide an owner .odev device for the bridge - - - --- 2018-05-04 Peter Rosin New
[v2,01/26] drm/bridge: allow optionally specifying an owner .odev device - - - --- 2018-05-04 Peter Rosin New
[3/3] drm/exynos: hdmi: avoid duplicating drm_bridge_attach - - - --- 2018-05-02 Peter Rosin New
[2/3] drm/rockchip: lvds: avoid duplicating drm_bridge_attach - - - --- 2018-05-02 Peter Rosin New
[1/3] drm/sti: do not remove the drm_bridge that was never added 1 - - --- 2018-05-02 Peter Rosin New
[22/24] drm/bridge: remove the .of_node member - - - --- 2018-04-30 Peter Rosin New
[24/24] drm/bridge: establish a link between the bridge supplier and consumer 1 - - --- 2018-04-26 Peter Rosin New
[23/24] drm/bridge: require the .owner to be filled in on drm_bridge_attach - - - --- 2018-04-26 Peter Rosin New
[22/24] drm/bridge: remove the .of_node member - - - --- 2018-04-26 Peter Rosin New
« 1 2 »