Show patches with: Submitter = J, KEERTHY       |    State = Action Required       |   296 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v5,4/4] arm64: dts: ti: am6: Add VTM node thermal: k3: Add support for bandgap sensors - - - --- 2020-03-31 J, KEERTHY New
[v5,3/4] arm64: dts: ti: am654: Add thermal zones thermal: k3: Add support for bandgap sensors - - - --- 2020-03-31 J, KEERTHY New
[v5,2/4] thermal: k3: Add support for bandgap sensors thermal: k3: Add support for bandgap sensors - - - --- 2020-03-31 J, KEERTHY New
[v5,1/4] dt-bindings: thermal: k3: Add VTM bindings documentation thermal: k3: Add support for bandgap sensors - 1 - --- 2020-03-31 J, KEERTHY New
[RESEND,v4,4/4] arm64: dts: ti: am6: Add VTM node thermal: k3: Add support for bandgap sensors - - - --- 2020-03-18 J, KEERTHY New
[RESEND,v4,3/4] arm64: dts: ti: am654: Add thermal zones thermal: k3: Add support for bandgap sensors - - - --- 2020-03-18 J, KEERTHY New
[RESEND,v4,2/4] thermal: k3: Add support for bandgap sensors thermal: k3: Add support for bandgap sensors - - - --- 2020-03-18 J, KEERTHY New
[RESEND,v4,1/4] dt-bindings: thermal: k3: Add VTM bindings documentation thermal: k3: Add support for bandgap sensors - 1 - --- 2020-03-18 J, KEERTHY New
[v4,4/4] arm64: dts: ti: am6: Add VTM node thermal: k3: Add support for bandgap sensors - - - --- 2020-03-18 J, KEERTHY New
[v4,3/4] arm64: dts: ti: am654: Add thermal zones thermal: k3: Add support for bandgap sensors - - - --- 2020-03-18 J, KEERTHY New
[v4,1/4] thermal: k3: Add support for bandgap sensors [v4,1/4] thermal: k3: Add support for bandgap sensors - - - --- 2020-03-18 J, KEERTHY New
[v4,1/4] dt-bindings: thermal: k3: Add VTM bindings documentation thermal: k3: Add support for bandgap sensors - - - --- 2020-03-18 J, KEERTHY New
[v3,4/4] arm64: dts: ti: am6: Add VTM node thermal: k3: Add support for bandgap sensors - - - --- 2020-02-19 J, KEERTHY New
[v3,3/4] arm64: dts: ti: am654: Add thermal zones thermal: k3: Add support for bandgap sensors - - - --- 2020-02-19 J, KEERTHY New
[v3,2/4] thermal: k3: Add support for bandgap sensors thermal: k3: Add support for bandgap sensors - - - --- 2020-02-19 J, KEERTHY New
[v3,1/4] dt-bindings: thermal: k3: Add VTM bindings documentation thermal: k3: Add support for bandgap sensors - - - --- 2020-02-19 J, KEERTHY New
[v2,4/4] arm64: dts: ti: am6: Add VTM node thermal: k3: Add support for bandgap sensors - - - --- 2020-02-14 J, KEERTHY New
[v2,3/4] arm64: dts: ti: am654: Add thermal zones thermal: k3: Add support for bandgap sensors - - - --- 2020-02-14 J, KEERTHY New
[v2,2/4] thermal: k3: Add support for bandgap sensors thermal: k3: Add support for bandgap sensors - - - --- 2020-02-14 J, KEERTHY New
[v2,1/4] dt-bindings: thermal: k3: Add VTM bindings documentation thermal: k3: Add support for bandgap sensors - - - --- 2020-02-14 J, KEERTHY New
[4/4] arm64: dts: ti: am6: Add VTM node thermal: k3: Add support for bandgap sensors - - - --- 2020-02-13 J, KEERTHY New
[3/4] arm64: dts: ti: am654: Add thermal zones thermal: k3: Add support for bandgap sensors - - - --- 2020-02-13 J, KEERTHY New
[2/4] thermal: k3: Add support for bandgap sensors thermal: k3: Add support for bandgap sensors - - - --- 2020-02-13 J, KEERTHY New
[1/4] dt-bindings: thermal: k3: Add VTM bindings documentation thermal: k3: Add support for bandgap sensors - - - --- 2020-02-13 J, KEERTHY New
[v2,linux-next,4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y 1 - - --- 2019-09-20 J, KEERTHY Queued
[v2,linux-next,3/4] arm: configs: multi_v7_defconfig: Change CONFIG_REMOTEPROC from m to y arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y - - - --- 2019-09-20 J, KEERTHY New
[v2,linux-next,2/4] arm: configs: davinci_all_defconfig: Change CONFIG_REMOTEPROC from m to y arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y 1 - - --- 2019-09-20 J, KEERTHY New
[v2,linux-next,1/4] arm: configs: omap2plus_defconfig: Change CONFIG_REMOTEPROC from m to y arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y 1 - - --- 2019-09-20 J, KEERTHY New
[RESEND,10/10] arm64: dts: k3-am6: Add crypto accelarator node crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,09/10] sa2ul: Add 3DES ECB & CBC Mode support crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,08/10] crypto: sa2ul: Add hmac(sha256) HMAC algorithm support crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,07/10] crypto: sa2ul: Add hmac(sha1) HMAC algorithm support crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,06/10] crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,05/10] crypto: sha256_generic: Export the Transform function crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,04/10] crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,03/10] crypto: sa2ul: Add AES ECB Mode support crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,02/10] crypto: sa2ul: Add crypto driver crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[RESEND,01/10] dt-bindings: crypto: k3: Add sa2ul bindings documentation crypto: k3: Add sa2ul driver - - - --- 2019-06-28 J, KEERTHY New
[v2] arm64: Kconfig.platforms: Enable GPIO_DAVINCI for ARCH_K3 [v2] arm64: Kconfig.platforms: Enable GPIO_DAVINCI for ARCH_K3 - - - --- 2019-06-27 J, KEERTHY New
[10/10] arm64: dts: k3-am6: Add crypto accelarator node crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[09/10] sa2ul: Add 3DES ECB & CBC Mode support crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[08/10] crypto: sa2ul: Add hmac(sha256) HMAC algorithm support crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[07/10] crypto: sa2ul: Add hmac(sha1) HMAC algorithm support crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[06/10] crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[05/10] crypto: sha256_generic: Export the Transform function crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[04/10] crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[03/10] crypto: sa2ul: Add AES ECB Mode support crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[02/10] crypto: sa2ul: Add crypto driver crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
[01/10] dt-bindings: crypto: k3: Add sa2ul bindings documentation crypto: k3: Add sa2ul driver - - - --- 2019-06-18 J, KEERTHY New
arm64: configs: Enable GPIO_DAVINCI arm64: configs: Enable GPIO_DAVINCI - - - --- 2019-06-05 J, KEERTHY New
[v3,4/4] soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-03 J, KEERTHY New
[v3,3/4] soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-03 J, KEERTHY New
[v3,2/4] arm: mach-omap2: pm33xx: Add support for rtc+ddr in self refresh mode AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-03 J, KEERTHY New
[v3,1/4] rtc: OMAP: Add support for rtc-only mode AM437x: Add rtc-only + DDR mode support 1 - - --- 2019-04-03 J, KEERTHY New
[v2,5/5] soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-02 J, KEERTHY New
[v2,4/5] soc: ti: pm33xx: Push the am33xx_push_sram_idle to the top AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-02 J, KEERTHY New
[v2,3/5] arm: mach-omap2: pm33xx: Add support for rtc+ddr in self refresh mode AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-02 J, KEERTHY New
[v2,2/5] rtc: interface: Add power_off_program to rtc_class_ops AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-02 J, KEERTHY New
[v2,1/5] rtc: OMAP: Add support for rtc-only mode AM437x: Add rtc-only + DDR mode support - - - --- 2019-04-02 J, KEERTHY New
[5/5] soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support AM437x: Add rtc-only + DDR mode support - - - --- 2019-03-22 J, KEERTHY New
[4/5] soc: ti: pm33xx: Push the am33xx_push_sram_idle to the top AM437x: Add rtc-only + DDR mode support - - - --- 2019-03-22 J, KEERTHY New
[3/5] arm: mach-omap2: pm33xx: Add support for rtc+ddr in self refresh mode AM437x: Add rtc-only + DDR mode support - - - --- 2019-03-22 J, KEERTHY New
[2/5] rtc: interface: Add power_off_program to rtc_class_ops AM437x: Add rtc-only + DDR mode support - - - --- 2019-03-22 J, KEERTHY New
[1/5] rtc: OMAP: Add support for rtc-only mode AM437x: Add rtc-only + DDR mode support - - - --- 2019-03-22 J, KEERTHY New
soc: ti: wkup_m3: Add PRCM int16 as the wake up source soc: ti: wkup_m3: Add PRCM int16 as the wake up source - - - --- 2018-11-12 J, KEERTHY New
[v3,RESEND,4/4] ti: pm33xx: Save/restore clk context based on enable_off_mode setting clk: clk: Add functions to save/restore clock context en-masse - - - --- 2018-09-04 J, KEERTHY New
[v3,RESEND,3/4] clk: ti: Add functions to save/restore clk context clk: clk: Add functions to save/restore clock context en-masse 1 - - --- 2018-09-04 J, KEERTHY New
[v3,RESEND,2/4] clk: clk: Add clk_gate_restore_context function clk: clk: Add functions to save/restore clock context en-masse 1 - - --- 2018-09-04 J, KEERTHY New
[v3,RESEND,1/4] clk: clk: Add functions to save/restore clock context en-masse clk: clk: Add functions to save/restore clock context en-masse 1 - - --- 2018-09-04 J, KEERTHY New
soc: ti: pm33xx: Enable DS0 for the platforms on which it is functional soc: ti: pm33xx: Enable DS0 for the platforms on which it is functional - - - --- 2018-08-22 J, KEERTHY New
ARM: Build failures with CONFIG_HAVE_RCU_TABLE_FREE=y on linux-next ARM: Build failures with CONFIG_HAVE_RCU_TABLE_FREE=y on linux-next - - - --- 2018-07-27 J, KEERTHY New
[v2,2/2] ARM: OMAP2+: sleep33/43xx: Add RTC-Mode support - - - --- 2018-07-09 J, KEERTHY New
[v2,1/2] ARM: OMAP2+: sleep33/43xx: Make sleep actions configurable - - - --- 2018-07-09 J, KEERTHY New
[2/2] ARM: OMAP2+: sleep43xx: Add RTC-Mode support - - - --- 2018-07-04 J, KEERTHY New
[1/2] ARM: OMAP2+: sleep33/43xx: Make sleep actions configurable - - - --- 2018-07-04 J, KEERTHY New
[RESEND,2/2] soc: ti: wkup_m3_ipc: Add wkup_m3_request_wake_src - - - --- 2018-06-21 J, KEERTHY New
[RESEND,1/2] ti: wkup_m3_ipc: Add rtc_only with ddr in self refresh mode support - - - --- 2018-06-21 J, KEERTHY New
ARM: hwmod: RTC: Don't assume lock/unlock will be called with irq enabled - - - --- 2018-06-21 J, KEERTHY New
[v2] ARM: dts: da850: Fix interrups property for gpio - - - --- 2018-06-05 J, KEERTHY New
ARM: davinci: da850: Fix interrups property for gpio - - - --- 2018-06-05 J, KEERTHY New
[2/2] soc: ti: wkup_m3_ipc: Add wkup_m3_request_wake_src - - - --- 2018-05-23 J, KEERTHY New
[1/2] ti: wkup_m3_ipc: Add rtc_only with ddr in self refresh mode support - - - --- 2018-05-23 J, KEERTHY New
[v2] OMAP: CLK: CLKSRC: Add suspend resume hooks - - - --- 2018-05-22 J, KEERTHY New
[v2] ARM: AM43XX: Add functions to save/restore am43xx control registers - - - --- 2018-05-22 J, KEERTHY New
[2/2] ARM: mach-omap2: prm44xx: Inroduce cpu_pm notifiers for context save/restore - - - --- 2018-05-18 J, KEERTHY New
[1/2] ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO - - - --- 2018-05-18 J, KEERTHY New
[v2] pinctrl: pinctrl-single: Add functions to save and restore pinctrl context 1 - - --- 2018-05-17 J, KEERTHY New
[4/4] omap2: powerdomain: Inroduce cpu_pm notifiers for context save/restore - - - --- 2018-05-16 J, KEERTHY New
[3/4] ARM: OMAP2: Add functions to save and restore powerdomain context - - - --- 2018-05-16 J, KEERTHY New
[2/4] omap2: clockdomain: Inroduce cpu_pm notifiers for context save/restore - - - --- 2018-05-16 J, KEERTHY New
[1/4] ARM: OMAP2: Add functions to save and restore clockdomain context en-masse. - - - --- 2018-05-16 J, KEERTHY New
[2/2] pinctrl: pinctrl-single: Add functions to save and restore pinctrl context - - - --- 2018-05-16 J, KEERTHY New
[1/2] arm: mach-omap2: pdata-quirks: Add a quirk function to convey off mode state - - - --- 2018-05-16 J, KEERTHY New
[14/14] ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO - - - --- 2018-04-12 J, KEERTHY New
[13/14] ARM: hwmod: RTC: Don't assume lock/unlock will be called with irq enabled - - - --- 2018-04-12 J, KEERTHY New
[12/14] OMAP: CLK: CLKSRC: Add suspend resume hooks - - - --- 2018-04-12 J, KEERTHY New
[11/14] gpio: omap: Restore power_mode configuration at resume time - - - --- 2018-04-12 J, KEERTHY New
[10/14] gpio: omap: Drop the concept of gpio banks not being able to lose context. - - - --- 2018-04-12 J, KEERTHY New
[09/14] ARM: OMAP2: Drop the concept of certain power domains not being able to lose context. - - - --- 2018-04-12 J, KEERTHY New
[08/14] ARM: OMAP2: Add functions to save and restore pinctrl context. - - - --- 2018-04-12 J, KEERTHY New
« 1 2 3 »