Show patches with: Submitter = Anson Huang       |   1664 patches
« 1 2 3 4 … 16 17 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
thermal: imx: Do NOT return -EPROBE_DEFER when "#cooling-cells" is present thermal: imx: Do NOT return -EPROBE_DEFER when "#cooling-cells" is present - - - --- 2020-10-22 Anson Huang New
[RESEND,V2,3/3] pwm: imx1: Use dev_err_probe() to simplify error handling [RESEND,V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling 1 - - --- 2020-10-20 Anson Huang New
[RESEND,V2,2/3] pwm: imx27: Use dev_err_probe() to simplify error handling [RESEND,V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling 1 - - --- 2020-10-20 Anson Huang New
[RESEND,V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling [RESEND,V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling 1 - - --- 2020-10-20 Anson Huang New
[V2,3/3] arm64: dts: imx8mp-evk: Correct WDOG_B pin configuration [V2,1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration - 1 - --- 2020-10-12 Anson Huang New
[V2,2/3] arm64: dts: imx8mn: Correct WDOG_B pin configuration [V2,1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration - 1 - --- 2020-10-12 Anson Huang New
[V2,1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration [V2,1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration - 1 - --- 2020-10-12 Anson Huang New
[3/3] arm64: dts: imx8mp-evk: Correct WDOG_B pin configuration [1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration - - - --- 2020-10-09 Anson Huang New
[2/3] arm64: dts: imx8mn: Correct WDOG_B pin configuration [1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration - - - --- 2020-10-09 Anson Huang New
[1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration [1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration - - - --- 2020-10-09 Anson Huang New
thermal: imx: Correct run_measurement check method thermal: imx: Correct run_measurement check method - - - --- 2020-09-28 Anson Huang New
arm64: dts: imx8mn-evk: Add cpu-supply to enable cpufreq arm64: dts: imx8mn-evk: Add cpu-supply to enable cpufreq - 1 - --- 2020-09-28 Anson Huang New
ARM: imx: Add revision support for i.MX7ULP revision 2.2 ARM: imx: Add revision support for i.MX7ULP revision 2.2 - 1 - --- 2020-09-27 Anson Huang New
[V3,4/4] ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default [V3,1/4] gpio: mxc: Support module build - - - --- 2020-09-17 Anson Huang New
[V3,3/4] ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default [V3,1/4] gpio: mxc: Support module build - - - --- 2020-09-17 Anson Huang New
[V3,2/4] arm64: defconfig: Build in CONFIG_GPIO_MXC by default Untitled series #350409 - - - --- 2020-09-17 Anson Huang New
[V3,1/4] gpio: mxc: Support module build [V3,1/4] gpio: mxc: Support module build - - - --- 2020-09-17 Anson Huang New
[V2,RESEND,4/4] ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default [V2,RESEND,1/4] gpio: mxc: Support module build - - - --- 2020-09-14 Anson Huang New
[V2,RESEND,3/4] ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default [V2,RESEND,1/4] gpio: mxc: Support module build - - - --- 2020-09-14 Anson Huang New
[V2,RESEND,2/4] arm64: defconfig: Build in CONFIG_GPIO_MXC by default [V2,RESEND,1/4] gpio: mxc: Support module build - - - --- 2020-09-14 Anson Huang New
[V2,RESEND,1/4] gpio: mxc: Support module build [V2,RESEND,1/4] gpio: mxc: Support module build - - - --- 2020-09-14 Anson Huang New
[V4,3/3] pinctrl: imx: Support building i.MX pinctrl core driver as module [V4,1/3] pinctrl: imx: Use function callbacks for SCU related functions - 1 - --- 2020-09-08 Anson Huang New
[V4,2/3] pinctrl: imx: Support building SCU pinctrl core driver as module [V4,1/3] pinctrl: imx: Use function callbacks for SCU related functions - 1 - --- 2020-09-08 Anson Huang New
[V4,1/3] pinctrl: imx: Use function callbacks for SCU related functions [V4,1/3] pinctrl: imx: Use function callbacks for SCU related functions - 1 - --- 2020-09-08 Anson Huang New
[V3,3/3] pinctrl: imx: Support building i.MX pinctrl core driver as module [V3,1/3] pinctrl: imx: Use function callbacks for SCU related functions - 1 - --- 2020-09-08 Anson Huang New
[V3,2/3] pinctrl: imx: Support building SCU pinctrl core driver as module [V3,1/3] pinctrl: imx: Use function callbacks for SCU related functions - - - --- 2020-09-08 Anson Huang New
[V3,1/3] pinctrl: imx: Use function callbacks for SCU related functions [V3,1/3] pinctrl: imx: Use function callbacks for SCU related functions - - - --- 2020-09-08 Anson Huang New
[V2,3/3] pinctrl: imx: Support building i.MX pinctrl core driver as module [V2,1/3] pinctrl: imx: Use function callbacks for SCU related functions - 1 - --- 2020-09-07 Anson Huang New
[V2,2/3] pinctrl: imx: Support building SCU pinctrl core driver as module [V2,1/3] pinctrl: imx: Use function callbacks for SCU related functions - - - --- 2020-09-07 Anson Huang New
[V2,1/3] pinctrl: imx: Use function callbacks for SCU related functions [V2,1/3] pinctrl: imx: Use function callbacks for SCU related functions - - - --- 2020-09-07 Anson Huang New
[V3,5/5] dt-bindings: serial: Convert NXP lpuart to json-schema [V3,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-18 Anson Huang New
[V3,4/5] dt-bindings: serial: Convert MXS auart to json-schema [V3,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-18 Anson Huang New
[V3,3/5] dt-bindings: serial: Convert i.MX uart to json-schema [V3,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-18 Anson Huang New
[V3,2/5] dt-bindings: clock: Update i.MX23 example [V3,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-18 Anson Huang New
[V3,1/5] dt-bindings: clock: Update i.MX28 example [V3,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-18 Anson Huang New
arm64: dts: imx8mp: Update pinfunc header file arm64: dts: imx8mp: Update pinfunc header file - - - --- 2020-08-14 Anson Huang New
[V2,5/5] dt-bindings: serial: Convert NXP lpuart to json-schema [V2,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-12 Anson Huang New
[V2,4/5] dt-bindings: serial: Convert MXS auart to json-schema [V2,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-12 Anson Huang New
[V2,3/5] dt-bindings: serial: Convert i.MX uart to json-schema [V2,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-12 Anson Huang New
[V2,2/5] dt-bindings: clock: Update i.MX23 example [V2,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-12 Anson Huang New
[V2,1/5] dt-bindings: clock: Update i.MX28 example [V2,1/5] dt-bindings: clock: Update i.MX28 example - - - --- 2020-08-12 Anson Huang New
i2c: imx: Use dev_err_probe() to simplify error handling i2c: imx: Use dev_err_probe() to simplify error handling 1 - - --- 2020-08-12 Anson Huang New
[V2,2/2] thermal: imx8mm: Use dev_err_probe() to simplify error handling [V2,1/2] thermal: imx: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[V2,1/2] thermal: imx: Use dev_err_probe() to simplify error handling [V2,1/2] thermal: imx: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[V2,3/3] pwm: imx1: Use dev_err_probe() to simplify error handling [V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling 2 - - --- 2020-08-11 Anson Huang New
[V2,2/3] pwm: imx27: Use dev_err_probe() to simplify error handling [V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling 2 - - --- 2020-08-11 Anson Huang New
[V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling [V2,1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling 2 - - --- 2020-08-11 Anson Huang New
[V2,2/2] irqchip/imx-irqsteer: Use dev_err_probe() to simplify error handling [V2,1/2] irqchip/imx-intmux: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[V2,1/2] irqchip/imx-intmux: Use dev_err_probe() to simplify error handling [V2,1/2] irqchip/imx-intmux: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[2/2] irqchip/imx-irqsteer: Use dev_err_probe() to simplify error handling [1/2] irqchip/imx-intmux: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[1/2] irqchip/imx-intmux: Use dev_err_probe() to simplify error handling [1/2] irqchip/imx-intmux: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[3/3] pwm: imx1: Use dev_err_probe() to simplify error handling [1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[2/3] pwm: imx27: Use dev_err_probe() to simplify error handling [1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling [1/3] pwm: imx-tpm: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
soc: imx: gpcv2: Use dev_err_probe() to simplify error handling soc: imx: gpcv2: Use dev_err_probe() to simplify error handling - 1 - --- 2020-08-11 Anson Huang New
[2/2] thermal: imx8mm: Use dev_err_probe() to simplify error handling [1/2] thermal: imx: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[1/2] thermal: imx: Use dev_err_probe() to simplify error handling [1/2] thermal: imx: Use dev_err_probe() to simplify error handling - - - --- 2020-08-11 Anson Huang New
[V2] PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER [V2] PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER - 1 - --- 2020-08-11 Anson Huang New
dt-bindings: ata: Convert i.MX sata to json-schema dt-bindings: ata: Convert i.MX sata to json-schema - - - --- 2020-08-05 Anson Huang New
dt-bindings: perf: Convert i.MX DDR to json-schema dt-bindings: perf: Convert i.MX DDR to json-schema - - - --- 2020-08-05 Anson Huang New
dt-bindings: rng: Convert i.MX to json-schema dt-bindings: rng: Convert i.MX to json-schema - - - --- 2020-08-05 Anson Huang New
[3/3] dt-bindings: serial: Convert NXP lpuart to json-schema [1/3] dt-bindings: serial: Convert i.MX uart to json-schema - - - --- 2020-08-05 Anson Huang New
[2/3] dt-bindings: serial: Convert MXS auart to json-schema [1/3] dt-bindings: serial: Convert i.MX uart to json-schema - - - --- 2020-08-05 Anson Huang New
[1/3] dt-bindings: serial: Convert i.MX uart to json-schema [1/3] dt-bindings: serial: Convert i.MX uart to json-schema - - - --- 2020-08-05 Anson Huang New
[2/2] dt-bindings: fsl: Convert i.MX7ULP SIM to json-schema [1/2] dt-bindings: fsl: Convert i.MX7ULP PM to json-schema - - - --- 2020-08-05 Anson Huang New
[1/2] dt-bindings: fsl: Convert i.MX7ULP PM to json-schema [1/2] dt-bindings: fsl: Convert i.MX7ULP PM to json-schema - - - --- 2020-08-05 Anson Huang New
[3/3] dt-bindings: crypto: Convert i.MX sahara to json-schema [1/3] dt-bindings: crypto: Convert MXS DCP to json-schema - - - --- 2020-08-05 Anson Huang New
[2/3] dt-bindings: crypto: Convert i.MX SCC to json-schema [1/3] dt-bindings: crypto: Convert MXS DCP to json-schema - - - --- 2020-08-05 Anson Huang New
[1/3] dt-bindings: crypto: Convert MXS DCP to json-schema [1/3] dt-bindings: crypto: Convert MXS DCP to json-schema - - - --- 2020-08-05 Anson Huang New
dt-bindings: w1: Convert i.MX to json-schema dt-bindings: w1: Convert i.MX to json-schema - - - --- 2020-08-05 Anson Huang New
clk: imx: Explicitly include bits.h clk: imx: Explicitly include bits.h 1 - - --- 2020-08-04 Anson Huang New
PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER - 1 - --- 2020-08-04 Anson Huang New
ARM: dts: imx7ulp: Correct gpio ranges ARM: dts: imx7ulp: Correct gpio ranges - - - --- 2020-08-03 Anson Huang New
[V4,2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode [V4,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations - 1 - --- 2020-07-30 Anson Huang New
[V4,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations [V4,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations - 1 - --- 2020-07-30 Anson Huang New
[2/2] ARM: dts: imx: Change gpmi nand node name to nand-controller Untitled series #326709 - - - --- 2020-07-30 Anson Huang New
[1/2] ARM: dts: imx27: Change nand node name to nand-controller [1/2] ARM: dts: imx27: Change nand node name to nand-controller - - - --- 2020-07-30 Anson Huang New
[V3,2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode [V3,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations - 1 - --- 2020-07-30 Anson Huang New
[V3,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations [V3,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations - - - --- 2020-07-30 Anson Huang New
[V9,6/6] clk: imx8qxp: Support building i.MX8QXP clock driver as module Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-30 Anson Huang New
[V9,5/6] clk: imx8m: Support module build Support building i.MX ARMv8 platforms clock driver as module - 2 - --- 2020-07-30 Anson Huang New
[V9,4/6] clk: imx: Add clock configuration for ARMv7 platforms Support building i.MX ARMv8 platforms clock driver as module - 2 - --- 2020-07-30 Anson Huang New
[V9,3/6] clk: imx: Support building i.MX common clock driver as module Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-30 Anson Huang New
[V9,2/6] clk: composite: Export clk_hw_register_composite() Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-30 Anson Huang New
[V9,1/6] clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-30 Anson Huang New
[V8,6/6] clk: imx8qxp: Support building i.MX8QXP clock driver as module Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-29 Anson Huang New
[V8,5/6] clk: imx8m: Support module build Support building i.MX ARMv8 platforms clock driver as module - 2 - --- 2020-07-29 Anson Huang New
[V8,4/6] clk: imx: Add clock configuration for ARMv7 platforms Support building i.MX ARMv8 platforms clock driver as module - 2 - --- 2020-07-29 Anson Huang New
[V8,3/6] clk: imx: Support building i.MX common clock driver as module Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-29 Anson Huang New
[V8,2/6] clk: composite: Export clk_hw_register_composite() Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-29 Anson Huang New
[V8,1/6] clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits Support building i.MX ARMv8 platforms clock driver as module 1 - - --- 2020-07-29 Anson Huang New
[V7,6/6] clk: imx8qxp: Support building i.MX8QXP clock driver as module Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-29 Anson Huang New
[V7,5/6] clk: imx8m: Support module build Support building i.MX ARMv8 platforms clock driver as module - 2 - --- 2020-07-29 Anson Huang New
[V7,4/6] clk: imx: Add clock configuration for ARMv7 platforms Support building i.MX ARMv8 platforms clock driver as module - 2 - --- 2020-07-29 Anson Huang New
[V7,3/6] clk: imx: Support building i.MX common clock driver as module Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-29 Anson Huang New
[V7,2/6] clk: composite: Export clk_hw_register_composite() Support building i.MX ARMv8 platforms clock driver as module - 1 - --- 2020-07-29 Anson Huang New
[V7,1/6] clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits Support building i.MX ARMv8 platforms clock driver as module - - - --- 2020-07-29 Anson Huang New
[V2,2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode [V2,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations - - - --- 2020-07-29 Anson Huang New
[V2,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations [V2,1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations - - - --- 2020-07-29 Anson Huang New
[2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode [1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations - - - --- 2020-07-28 Anson Huang New
« 1 2 3 4 … 16 17 »