Show patches with: Submitter = Bartosz Golaszewski       |    State = Action Required       |   768 patches
« 1 2 3 47 8 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,3/3] ARM: davinci: remove legacy timer support ARM: davinci: convert dm365 to using the new clocksource driver - 1 - 0 0 0 2019-12-24 Bartosz Golaszewski New
[v2,2/3] ARM: davinci: dm365: switch to using the clocksource driver ARM: davinci: convert dm365 to using the new clocksource driver - 1 - 0 0 0 2019-12-24 Bartosz Golaszewski New
[v2,1/3] clocksource: davinci: only enable tim34 in periodic mode once it's initialized ARM: davinci: convert dm365 to using the new clocksource driver - - - 0 0 0 2019-12-24 Bartosz Golaszewski New
[3/3] ARM: davinci: remove legacy timer support ARM: davinci: convert dm365 to using the new clocksource driver - 1 - 0 0 0 2019-12-13 Bartosz Golaszewski New
[2/3] ARM: davinci: dm365: switch to using the clocksource driver ARM: davinci: convert dm365 to using the new clocksource driver - 1 - 0 0 0 2019-12-13 Bartosz Golaszewski New
[1/3] clocksource: davinci: work around a clocksource problem on dm365 SoC ARM: davinci: convert dm365 to using the new clocksource driver - - - 0 0 0 2019-12-13 Bartosz Golaszewski New
[v2,5/5] ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: make DaVinci part of the ARM v5 multiplatform build 1 - - 0 0 0 2019-07-25 Bartosz Golaszewski New
[v2,4/5] ARM: davinci: support multiplatform build for ARM v5 ARM: make DaVinci part of the ARM v5 multiplatform build 1 - - 0 0 0 2019-07-25 Bartosz Golaszewski New
[v2,3/5] davinci: fix sleep.S build error on ARMv4 ARM: make DaVinci part of the ARM v5 multiplatform build - - - 0 0 0 2019-07-25 Bartosz Golaszewski New
[v2,2/5] media: davinci-vpbe: remove obsolete includes ARM: make DaVinci part of the ARM v5 multiplatform build - - - 0 0 0 2019-07-25 Bartosz Golaszewski New
[v2,1/5] staging: media/davinci_vpfe: fix pinmux setup compilation ARM: make DaVinci part of the ARM v5 multiplatform build - - - 0 0 0 2019-07-25 Bartosz Golaszewski New
[v2,9/9] fbdev: da8xx: use resource management for dma ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,8/9] fbdev: da8xx-fb: drop a redundant if ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,7/9] fbdev: da8xx-fb: use devm_platform_ioremap_resource() ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,6/9] fbdev: da8xx: remove panel_power_ctrl() callback from platform data ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,5/9] ARM: davinci: da850-evm: switch to using a fixed regulator for lcdc ARM: davinci: da850-evm: remove more legacy GPIO calls - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,4/9] fbdev: da8xx: add support for a regulator ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,3/9] ARM: davinci: da850-evm: model the backlight GPIO as an actual device ARM: davinci: da850-evm: remove more legacy GPIO calls - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,2/9] ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: da850-evm: remove more legacy GPIO calls - - - 0 0 0 2019-07-22 Bartosz Golaszewski New
[v2,1/9] ARM: davinci: refresh davinci_all_defconfig ARM: davinci: da850-evm: remove more legacy GPIO calls - - - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,10/10] ARM: davinci: remove legacy timer support ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,09/10] ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,08/10] ARM: davinci: dm644x: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,07/10] ARM: davinci: dm365: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,06/10] ARM: davinci: dm355: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,05/10] ARM: davinci: move timer definitions to davinci.h ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,04/10] ARM: davinci: da830: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,03/10] ARM: davinci: da850: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,02/10] ARM: davinci: WARN_ON() if clk_get() fails ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[RESEND,01/10] ARM: davinci: enable the clocksource driver for DT mode ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-07-22 Bartosz Golaszewski New
[12/12] fbdev: da8xx: use resource management for dma ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-06-25 Bartosz Golaszewski New
[11/12] fbdev: da8xx-fb: drop a redundant if ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-06-25 Bartosz Golaszewski New
[10/12] fbdev: da8xx-fb: use devm_platform_ioremap_resource() ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-06-25 Bartosz Golaszewski New
[09/12] fbdev: da8xx: remove panel_power_ctrl() callback from platform data ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-06-25 Bartosz Golaszewski New
[08/12] ARM: davinci: da850-evm: switch to using a fixed regulator for lcdc ARM: davinci: da850-evm: remove more legacy GPIO calls - 1 - 0 0 0 2019-06-25 Bartosz Golaszewski New
[07/12] fbdev: da8xx: add support for a regulator ARM: davinci: da850-evm: remove more legacy GPIO calls 1 - - 0 0 0 2019-06-25 Bartosz Golaszewski New
[06/12] ARM: davinci: da850-evm: model the backlight GPIO as an actual device ARM: davinci: da850-evm: remove more legacy GPIO calls - 1 - 0 0 0 2019-06-25 Bartosz Golaszewski New
[05/12] ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: da850-evm: remove more legacy GPIO calls - - - 0 0 0 2019-06-25 Bartosz Golaszewski New
[04/12] ARM: davinci: refresh davinci_all_defconfig ARM: davinci: da850-evm: remove more legacy GPIO calls - - - 0 0 0 2019-06-25 Bartosz Golaszewski New
[03/12] backlight: gpio: pull the non-pdata device probing code into probe() ARM: davinci: da850-evm: remove more legacy GPIO calls 1 2 - 0 0 0 2019-06-25 Bartosz Golaszewski New
[02/12] backlight: gpio: use a helper variable for &pdev->dev ARM: davinci: da850-evm: remove more legacy GPIO calls - 1 - 0 0 0 2019-06-25 Bartosz Golaszewski New
[01/12] backlight: gpio: allow to probe non-pdata devices from board files ARM: davinci: da850-evm: remove more legacy GPIO calls - 1 - 0 0 0 2019-06-25 Bartosz Golaszewski New
[10/10] ARM: davinci: remove legacy timer support ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[09/10] ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[08/10] ARM: davinci: dm644x: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[07/10] ARM: davinci: dm365: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[06/10] ARM: davinci: dm355: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[05/10] ARM: davinci: move timer definitions to davinci.h ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[04/10] ARM: davinci: da830: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[03/10] ARM: davinci: da850: switch to using the clocksource driver ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[02/10] ARM: davinci: WARN_ON() if clk_get() fails ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
[01/10] ARM: davinci: enable the clocksource driver for DT mode ARM: davinci: use the new clocksource driver - 1 - 0 0 0 2019-06-24 Bartosz Golaszewski New
ARM: davinci: da8xx: specify dma_coherent_mask for lcdc ARM: davinci: da8xx: specify dma_coherent_mask for lcdc - - - 0 0 0 2019-06-07 Bartosz Golaszewski New
[RESEND,v5,5/5] ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-05-27 Bartosz Golaszewski New
[RESEND,v5,4/5] ARM: dts: da850-evm: enable cpufreq ARM: da850: enable cpufreq in DT mode - 1 - 0 0 0 2019-05-27 Bartosz Golaszewski New
[RESEND,v5,3/5] ARM: dts: da850-lcdk: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-05-27 Bartosz Golaszewski New
[RESEND,v5,2/5] ARM: dts: da850-lego-ev3: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-05-27 Bartosz Golaszewski New
[RESEND,v5,1/5] ARM: dts: da850: add cpu node and operating points to DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-05-27 Bartosz Golaszewski New
[v5,5/5] ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-17 Bartosz Golaszewski New
[v5,4/5] ARM: dts: da850-evm: enable cpufreq ARM: da850: enable cpufreq in DT mode - 1 - 0 0 0 2019-04-17 Bartosz Golaszewski New
[v5,3/5] ARM: dts: da850-lcdk: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-17 Bartosz Golaszewski New
[v5,2/5] ARM: dts: da850-lego-ev3: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-17 Bartosz Golaszewski New
[v5,1/5] ARM: dts: da850: add cpu node and operating points to DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-17 Bartosz Golaszewski New
[v4,5/5] ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-12 Bartosz Golaszewski New
[v4,4/5] ARM: dts: da850-evm: enable cpufreq ARM: da850: enable cpufreq in DT mode - 1 - 0 0 0 2019-04-12 Bartosz Golaszewski New
[v4,3/5] ARM: dts: da850-lcdk: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-12 Bartosz Golaszewski New
[v4,2/5] ARM: dts: da850-lego-ev3: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-12 Bartosz Golaszewski New
[v4,1/5] ARM: dts: da850: add cpu node and operating points to DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-12 Bartosz Golaszewski New
[v4,6/6] usb: ohci-da8xx: drop the vbus GPIO ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator 1 - - 0 0 0 2019-04-11 Bartosz Golaszewski New
[v4,5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-04-11 Bartosz Golaszewski New
[v4,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-04-11 Bartosz Golaszewski New
[v4,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-04-11 Bartosz Golaszewski New
[v4,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator 1 - - 0 0 0 2019-04-11 Bartosz Golaszewski New
[v4,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-04-11 Bartosz Golaszewski New
[v3,6/6] usb: ohci-da8xx: drop the vbus GPIO ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator 1 - - 0 0 0 2019-04-09 Bartosz Golaszewski New
[v3,5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-04-09 Bartosz Golaszewski New
[v3,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-04-09 Bartosz Golaszewski New
[v3,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator 1 - - 0 0 0 2019-04-09 Bartosz Golaszewski New
[v3,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator 1 - - 0 0 0 2019-04-09 Bartosz Golaszewski New
[v3,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-04-09 Bartosz Golaszewski New
[v3,3/3] ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-08 Bartosz Golaszewski New
[v3,2/3] ARM: dts: da850-evm: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-08 Bartosz Golaszewski New
[v3,1/3] ARM: dts: da850: add cpu node and operating points to DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-04-08 Bartosz Golaszewski New
[v2,6/6] usb: ohci-da8xx: drop the vbus GPIO ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-29 Bartosz Golaszewski New
[v2,5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-29 Bartosz Golaszewski New
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-29 Bartosz Golaszewski New
[v2,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-29 Bartosz Golaszewski New
[v2,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-29 Bartosz Golaszewski New
[v2,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-29 Bartosz Golaszewski New
[3/3] usb: ohci-da8xx: drop the vbus GPIO ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-26 Bartosz Golaszewski New
[2/3] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-26 Bartosz Golaszewski New
[1/3] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator - - - 0 0 0 2019-03-26 Bartosz Golaszewski New
[v2,4/4] ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-22 Bartosz Golaszewski New
[v2,3/4] ARM: dts: da850-evm: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-22 Bartosz Golaszewski New
[v2,2/4] ARM: dts: da850: add cpu node and operating points to DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-22 Bartosz Golaszewski New
[v2,1/4] ARM: davinci: fix cpufreq registration on da850-evm ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-22 Bartosz Golaszewski New
[4/4] ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-21 Bartosz Golaszewski New
[3/4] ARM: dts: da850-evm: enable cpufreq ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-21 Bartosz Golaszewski New
[2/4] ARM: dts: da850: add cpu node and operating points to DT ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-21 Bartosz Golaszewski New
[1/4] ARM: davinci: fix cpufreq registration on da850-evm ARM: da850: enable cpufreq in DT mode - - - 0 0 0 2019-03-21 Bartosz Golaszewski New
« 1 2 3 47 8 »