Show patches with: Submitter = Maxime Chevallier       |    State = Action Required       |   329 patches
« 1 2 3 4 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/3] dt-bindings: vendor-prefixes: Add techwell vendor prefix media: Add support for the Techwell TW9900 video decoder 1 - - --- 2020-09-18 Maxime Chevallier New
[1/3] media: dt-bindings: media: Document Rockchip CIF bindings media: rockchip: Introduce driver for the camera interface on PX30 - - - --- 2020-04-03 Maxime Chevallier New
[2/3] media: dt-bindings: media: i2c: Add bindings for TW9900 media: Add support for the Techwell TW9900 video decoder - - - --- 2020-09-18 Maxime Chevallier New
[2/3] media: rockchip: Introduce driver for Rockhip's camera interface media: rockchip: Introduce driver for the camera interface on PX30 - - - --- 2020-04-03 Maxime Chevallier New
[3/3] arm64: dts: rockchip: Add the camera interface description of the PX30 media: rockchip: Introduce driver for the camera interface on PX30 - - - --- 2020-04-03 Maxime Chevallier New
[3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder media: Add support for the Techwell TW9900 video decoder - - - --- 2020-09-18 Maxime Chevallier New
[ethtool-next,1/3] update UAPI header copies ethtool: Introduce PHY listing and targetting - - - --- 2024-01-03 Maxime Chevallier New
[ethtool-next,2/3] ethtool: Allow passing a PHY index for phy-targetting commands ethtool: Introduce PHY listing and targetting - - - --- 2024-01-03 Maxime Chevallier New
[ethtool-next,3/3] ethtool: Introduce a command to list PHYs ethtool: Introduce PHY listing and targetting - - - --- 2024-01-03 Maxime Chevallier New
[net-next,1/2] net: altera: tse: add a dedicated helper for reset net: altera: tse: phylink conversion - - - --- 2022-08-23 Maxime Chevallier New
[net-next,1/2] net: stmmac: Add PCS_LYNX as a dependency for the whole driver Followup fixes for the dwmac and altera lynx conversion - - - --- 2023-06-06 Maxime Chevallier New
[net-next,1/3] net: pcs: altera-tse: use read_poll_timeout to wait for reset net: pcs: altera-tse: simplify and clean-up the driver - - - --- 2022-11-25 Maxime Chevallier New
[net-next,1/4] net: mdio: Introduce a regmap-based mdio driver net: add a regmap-based mdio driver and drop TSE PCS - - - --- 2023-05-24 Maxime Chevallier New
[net-next,1/4] net: mvpp2: cls: Use a dedicated lu_type for the RSS lookup net: mvpp2: cls: Allow steering based on vlan tag - - - --- 2019-06-18 Maxime Chevallier New
[net-next,1/4] net: phy: Introduce QUSGMII PHY mode net: Introduce QUSGMII phy mode - - - --- 2022-07-28 Maxime Chevallier New
[net-next,1/5] dt-bindings: net: Convert Altera TSE bindings to yaml net: altera: tse: phylink conversion - - - --- 2022-08-26 Maxime Chevallier New
[net-next,1/5] net: ipqess: introduce the Qualcomm IPQESS driver net: ipqess: introduce Qualcomm IPQESS driver - - - --- 2022-04-22 Maxime Chevallier New
[net-next,1/5] net: mvpp2: cls: Use the correct number of rules in various places net: mvpp2: Classifier updates, RSS - - - --- 2019-05-24 Maxime Chevallier New
[net-next,1/6] net: phy: Introduce QUSGMII PHY mode net: Introduce Ethernet Inband Extensions - - - --- 2022-05-19 Maxime Chevallier New
[net-next,1/7] net: phy: Extract genphy_c45_read_abilities from marvell10g net: phy: Add support for 2.5GBASET PHYs - - - --- 2019-01-18 Maxime Chevallier New
[net-next,1/7] net: phy: marvell10g: Use get_features to get the PHY abilities net: phy: marvell10g: Add 2.5GBaseT - - - --- 2019-02-21 Maxime Chevallier New
[net-next,1/8] netlink: specs: add phy-index as a header parameter net: Allow targeting specific PHYs through netlink - 1 - --- 2024-04-09 Maxime Chevallier New
[net-next,2/2] net: altera-tse: Initialize the regmap_config struct before using it Followup fixes for the dwmac and altera lynx conversion - - - --- 2023-06-06 Maxime Chevallier New
[net-next,2/2] net: altera: tse: convert to phylink net: altera: tse: phylink conversion - - - --- 2022-08-23 Maxime Chevallier New
[net-next,2/3] net: pcs: altera-tse: don't set the speed for 1000BaseX net: pcs: altera-tse: simplify and clean-up the driver - - - --- 2022-11-25 Maxime Chevallier New
[net-next,2/4] dt-bindings: net: ethernet-controller: add QUSGMII mode net: Introduce QUSGMII phy mode 1 - - --- 2022-07-28 Maxime Chevallier New
[net-next,2/4] net: ethernet: altera-tse: Convert to mdio-regmap and use PCS Lynx net: add a regmap-based mdio driver and drop TSE PCS - - - --- 2023-05-24 Maxime Chevallier New
[net-next,2/4] net: mvpp2: cls: Only select applicable flows of classification offload net: mvpp2: cls: Allow steering based on vlan tag - - - --- 2019-06-18 Maxime Chevallier New
[net-next,2/5] net: altera: tse: cosmetic change to use reverse xmas tree ordering net: altera: tse: phylink conversion - - - --- 2022-08-26 Maxime Chevallier New
[net-next,2/5] net: dsa: add out-of-band tagging protocol net: ipqess: introduce Qualcomm IPQESS driver - - - --- 2022-04-22 Maxime Chevallier New
[net-next,2/5] net: mvpp2: cls: Bypass C2 internals FIFOs at init net: mvpp2: Classifier updates, RSS - - - --- 2019-05-24 Maxime Chevallier New
[net-next,2/6] dt-bindings: net: ethernet-controller: add QUSGMII mode net: Introduce Ethernet Inband Extensions 1 - - --- 2022-05-19 Maxime Chevallier New
[net-next,2/7] net: phy: Add generic support for 2.5GBaseT and 5GBaseT net: phy: Add support for 2.5GBASET PHYs - - - --- 2019-01-18 Maxime Chevallier New
[net-next,2/7] net: phy: marvell10g: Use linkmode_set_bit helper instead of __set_bit net: phy: marvell10g: Add 2.5GBaseT - - - --- 2019-02-21 Maxime Chevallier New
[net-next,2/8] net: ethtool: Introduce a command to list PHYs on an interface net: Allow targeting specific PHYs through netlink - 1 - --- 2024-04-09 Maxime Chevallier New
[net-next,3/3] net: pcs: altera-tse: remove unnecessary register definitions net: pcs: altera-tse: simplify and clean-up the driver - - - --- 2022-11-25 Maxime Chevallier New
[net-next,3/4] net: mvpp2: cls: right-justify the C2 TCAM keys net: mvpp2: cls: Allow steering based on vlan tag - - - --- 2019-06-18 Maxime Chevallier New
[net-next,3/4] net: pcs: Drop the TSE PCS driver net: add a regmap-based mdio driver and drop TSE PCS - - - --- 2023-05-24 Maxime Chevallier New
[net-next,3/4] net: phy: Add helper to derive the number of ports from a phy mode net: Introduce QUSGMII phy mode - - - --- 2022-07-28 Maxime Chevallier New
[net-next,3/5] net: ipqess: Add out-of-band DSA tagging support net: ipqess: introduce Qualcomm IPQESS driver - - - --- 2022-04-22 Maxime Chevallier New
[net-next,3/5] net: mvpp2: cls: Use RSS contexts to handle RSS tables net: mvpp2: Classifier updates, RSS - - 1 --- 2019-05-24 Maxime Chevallier New
[net-next,3/5] net: pcs: add new PCS driver for altera TSE PCS net: altera: tse: phylink conversion - - - --- 2022-08-26 Maxime Chevallier New
[net-next,3/6] net: lan966x: Add QUSGMII support for lan966x net: Introduce Ethernet Inband Extensions - - - --- 2022-05-19 Maxime Chevallier New
[net-next,3/7] net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET net: phy: marvell10g: Add 2.5GBaseT - - - --- 2019-02-21 Maxime Chevallier New
[net-next,3/7] net: phy: Read 2.5G and 5G extended abilities net: phy: Add support for 2.5GBASET PHYs - - - --- 2019-01-18 Maxime Chevallier New
[net-next,3/8] netlink: specs: add ethnl PHY_GET command set net: Allow targeting specific PHYs through netlink - - - --- 2024-04-09 Maxime Chevallier New
[net-next,4/4] net: lan966x: Add QUSGMII support for lan966x net: Introduce QUSGMII phy mode - - - --- 2022-07-28 Maxime Chevallier New
[net-next,4/4] net: mvpp2: cls: Add steering based on vlan Id and priority. net: mvpp2: cls: Allow steering based on vlan tag - - - --- 2019-06-18 Maxime Chevallier New
[net-next,4/4] net: stmmac: dwmac-sogfpga: use the lynx pcs driver net: add a regmap-based mdio driver and drop TSE PCS - - - --- 2023-05-24 Maxime Chevallier New
[net-next,4/5] net: altera: tse: convert to phylink net: altera: tse: phylink conversion - - - --- 2022-08-26 Maxime Chevallier New
[net-next,4/5] net: dt-bindings: Introduce the Qualcomm IPQESS Ethernet controller net: ipqess: introduce Qualcomm IPQESS driver - - - --- 2022-04-22 Maxime Chevallier New
[net-next,4/5] net: mvpp2: cls: Extract the RSS context when parsing the ethtool rule net: mvpp2: Classifier updates, RSS - - - --- 2019-05-24 Maxime Chevallier New
[net-next,4/6] net: phy: Add support for inband extensions net: Introduce Ethernet Inband Extensions - - - --- 2022-05-19 Maxime Chevallier New
[net-next,4/7] net: phy: marvell10g: Add support for 2.5GBASET and 5GBASET net: phy: Add support for 2.5GBASET PHYs - - - --- 2019-01-18 Maxime Chevallier New
[net-next,4/7] net: phy: marvell10g: Use a #define for 88X3310 family id net: phy: marvell10g: Add 2.5GBaseT - - - --- 2019-02-21 Maxime Chevallier New
[net-next,4/8] net: ethtool: plca: Target the command to the requested PHY net: Allow targeting specific PHYs through netlink - 1 - --- 2024-04-09 Maxime Chevallier New
[net-next,5/5] ARM: dts: qcom: ipq4019: Add description for the IPQESS Ethernet controller net: ipqess: introduce Qualcomm IPQESS driver - - - --- 2022-04-22 Maxime Chevallier New
[net-next,5/5] dt-bindings: net: altera: tse: add an optional pcs register range net: altera: tse: phylink conversion - - - --- 2022-08-26 Maxime Chevallier New
[net-next,5/5] net: mvpp2: cls: Support steering to RSS contexts net: mvpp2: Classifier updates, RSS - - - --- 2019-05-24 Maxime Chevallier New
[net-next,5/6] net: lan966x: Allow using PCH extension for PTP net: Introduce Ethernet Inband Extensions - - - --- 2022-05-19 Maxime Chevallier New
[net-next,5/7] net: phy: marvell10g: Force reading of 2.5/5G net: phy: marvell10g: Add 2.5GBaseT - - - --- 2019-02-21 Maxime Chevallier New
[net-next,5/7] net: phy: marvell10g: Force reading of 2.5/5G PMA extended abilities net: phy: Add support for 2.5GBASET PHYs - - - --- 2019-01-18 Maxime Chevallier New
[net-next,5/8] net: ethtool: pse-pd: Target the command to the requested PHY net: Allow targeting specific PHYs through netlink - 1 - --- 2024-04-09 Maxime Chevallier New
[net-next,6/6] net: phy: micrel: Add QUSGMII support and PCH extension net: Introduce Ethernet Inband Extensions - - - --- 2022-05-19 Maxime Chevallier New
[net-next,6/7] net: mvpp2: Add 2.5GBaseT support net: phy: marvell10g: Add 2.5GBaseT - 1 - --- 2019-02-21 Maxime Chevallier New
[net-next,6/7] net: mvpp2: Add 2.5GBaseT support net: phy: Add support for 2.5GBASET PHYs - - - --- 2019-01-18 Maxime Chevallier New
[net-next,6/8] net: ethtool: cable-test: Target the command to the requested PHY net: Allow targeting specific PHYs through netlink - 1 - --- 2024-04-09 Maxime Chevallier New
[net-next,7/7] net: phy: marvell10g: add support for the 88x2110 PHY net: phy: marvell10g: Add 2.5GBaseT - - - --- 2019-02-21 Maxime Chevallier New
[net-next,7/7] net: phy: marvell10g: add support for the 88x2110 PHY net: phy: Add support for 2.5GBASET PHYs - - - --- 2019-01-18 Maxime Chevallier New
[net-next,7/8] net: ethtool: strset: Allow querying phy stats by index net: Allow targeting specific PHYs through netlink - 1 - --- 2024-04-09 Maxime Chevallier New
[net-next,8/8] Documentation: networking: document phy_link_topology net: Allow targeting specific PHYs through netlink - 1 - --- 2024-04-09 Maxime Chevallier New
[net-next,RESEND,v4,1/4] net: phy: Introduce QUSGMII PHY mode net: Introduce QUSGMII phy mode - 1 - --- 2022-08-17 Maxime Chevallier New
[net-next,RESEND,v4,2/4] dt-bindings: net: ethernet-controller: add QUSGMII mode net: Introduce QUSGMII phy mode 1 1 - --- 2022-08-17 Maxime Chevallier New
[net-next,RESEND,v4,3/4] net: phy: Add helper to derive the number of ports from a phy mode net: Introduce QUSGMII phy mode - 1 - --- 2022-08-17 Maxime Chevallier New
[net-next,RESEND,v4,4/4] net: lan966x: Add QUSGMII support for lan966x net: Introduce QUSGMII phy mode - 1 - --- 2022-08-17 Maxime Chevallier New
[net-next,v10,01/13] net: phy: Introduce ethernet link topology representation Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,03/13] net: phy: add helpers to handle sfp phy connect/disconnect Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,04/13] net: sfp: Add helper to return the SFP bus name Introduce PHY listing and link_topology tracking - 1 - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,05/13] net: ethtool: Allow passing a phy index for some commands Introduce PHY listing and link_topology tracking - 1 - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,06/13] netlink: specs: add phy-index as a header parameter Introduce PHY listing and link_topology tracking - 1 - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,07/13] net: ethtool: Introduce a command to list PHYs on an interface Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,08/13] netlink: specs: add ethnl PHY_GET command set Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,09/13] net: ethtool: plca: Target the command to the requested PHY Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,10/13] net: ethtool: pse-pd: Target the command to the requested PHY Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,11/13] net: ethtool: cable-test: Target the command to the requested PHY Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,12/13] net: ethtool: strset: Allow querying phy stats by index Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v10,13/13] Documentation: networking: document phy_link_topology Introduce PHY listing and link_topology tracking - - - --- 2024-03-04 Maxime Chevallier New
[net-next,v11,01/13] net: phy: Introduce ethernet link topology representation Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,03/13] net: phy: add helpers to handle sfp phy connect/disconnect Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,04/13] net: sfp: Add helper to return the SFP bus name Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,05/13] net: ethtool: Allow passing a phy index for some commands Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,06/13] netlink: specs: add phy-index as a header parameter Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,07/13] net: ethtool: Introduce a command to list PHYs on an interface Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,08/13] netlink: specs: add ethnl PHY_GET command set Introduce PHY listing and link_topology tracking - - - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,09/13] net: ethtool: plca: Target the command to the requested PHY Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,10/13] net: ethtool: pse-pd: Target the command to the requested PHY Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,11/13] net: ethtool: cable-test: Target the command to the requested PHY Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
[net-next,v11,12/13] net: ethtool: strset: Allow querying phy stats by index Introduce PHY listing and link_topology tracking - 1 - --- 2024-04-04 Maxime Chevallier New
« 1 2 3 4 »