Show patches with: Submitter = Frieder Schrempf       |    State = Action Required       |    Archived = No       |   79 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,2/2] dt-bindings: arm: fsl: Add Kontron i.MX8M Mini SoMs and boards Add support for Kontron i.MX8MM SoMs and boards - 1 - 0 0 0 2020-07-16 Frieder Schrempf New
[v2,1/2] arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards Add support for Kontron i.MX8MM SoMs and boards - - - 0 0 0 2020-07-16 Frieder Schrempf New
[2/2] dt-bindings: arm: fsl: Add Kontron i.MX8MM SoMs and boards Add support for Kontron i.MX8MM SoMs and boards - 1 - 0 0 0 2020-07-02 Frieder Schrempf New
[1/2] arm64: dts: Add the Kontron i.MX8M-Mini SoMs and baseboards Add support for Kontron i.MX8MM SoMs and boards - - - 0 0 0 2020-07-02 Frieder Schrempf New
[2/2] ARM: dts: Change WDOG_ANY signal from push-pull to open-drain [1/2] ARM: dts: Move watchdog from Kontron i.MX6UL/ULL board to SoM - - - 0 0 0 2020-05-28 Frieder Schrempf New
[1/2] ARM: dts: Move watchdog from Kontron i.MX6UL/ULL board to SoM [1/2] ARM: dts: Move watchdog from Kontron i.MX6UL/ULL board to SoM - - - 0 0 0 2020-05-28 Frieder Schrempf New
[RFC,4/4] arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core using Etnaviv Add support for i.MX8MM GPUs through Etnaviv - - - 0 0 0 2020-04-30 Frieder Schrempf New
[RFC,3/4] drm/etnaviv: Change order of enabling clocks to fix boot on i.MX8MM Add support for i.MX8MM GPUs through Etnaviv - - - 0 0 0 2020-04-30 Frieder Schrempf New
[RFC,2/4] drm/etnaviv: Fix error path in etnaviv_gpu_clk_enable() Add support for i.MX8MM GPUs through Etnaviv - - - 0 0 0 2020-04-30 Frieder Schrempf New
[RFC,1/4] drm/etnaviv: Prevent IRQ triggering at probe time on i.MX8MM Add support for i.MX8MM GPUs through Etnaviv - - - 0 0 0 2020-04-30 Frieder Schrempf New
[v4,9/9] dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles Add support for more Kontron i.MX6UL/ULL SoMs and boards - 2 - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,8/9] ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,7/9] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,6/9] ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,5/9] ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,4/9] ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,3/9] ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,2/9] ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-11-04 Frieder Schrempf New
[v4,1/9] ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-11-04 Frieder Schrempf New
[v3,11/11] MAINTAINERS: Add an entry for Kontron Electronics ARM board support Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,10/11] dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles Add support for more Kontron i.MX6UL/ULL SoMs and boards - 2 - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,09/11] ARM: dts: imx6ul-kontron-n6x1x-s: Disable the snvs-poweroff driver Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,08/11] ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,07/11] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,06/11] ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and eMMC Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,05/11] ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,04/11] ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,03/11] ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,02/11] ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-31 Frieder Schrempf New
[v3,01/11] ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-31 Frieder Schrempf New
[v2,11/11] ARM: dts: imx6ul-kontron-n6310-s-43: Add missing includes for GPIOs and IRQs Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,10/11] MAINTAINERS: Add an entry for Kontron Electronics ARM board support Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,09/11] dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles Add support for more Kontron i.MX6UL/ULL SoMs and boards - 2 - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,08/11] ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,07/11] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,06/11] ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and eMMC Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,05/11] ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,04/11] ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,03/11] ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,02/11] ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-29 Frieder Schrempf New
[v2,01/11] ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-29 Frieder Schrempf New
[06/10] ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and eMMC Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-16 Frieder Schrempf New
[07/10] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-16 Frieder Schrempf New
[08/10] ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-16 Frieder Schrempf New
[04/10] ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and 'N6411 S' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-16 Frieder Schrempf New
[05/10] ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path' Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-16 Frieder Schrempf New
[03/10] ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-16 Frieder Schrempf New
[02/10] ARM: dts: Add support for two more Kontron SoMs N6311 and N6411 Add support for more Kontron i.MX6UL/ULL SoMs and boards - 1 - 0 0 0 2019-10-16 Frieder Schrempf New
[01/10] ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file Add support for more Kontron i.MX6UL/ULL SoMs and boards - - - 0 0 0 2019-10-16 Frieder Schrempf New
[v3,4/4] serial: 8250: Don't check for mctrl_gpio_init() returning -ENOSYS [v3,1/4] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib 1 - - 0 0 0 2019-08-02 Frieder Schrempf New
[v3,2/4] serial: mctrl_gpio: Add a NULL check to mctrl_gpio_to_gpiod() [v3,1/4] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib - - - 0 0 0 2019-08-02 Frieder Schrempf New
[v3,3/4] serial: sh-sci: Don't check for mctrl_gpio_init() returning -ENOSYS [v3,1/4] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib 1 1 - 0 0 0 2019-08-02 Frieder Schrempf New
[v3,1/4] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib [v3,1/4] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib - 3 - 0 0 0 2019-08-02 Frieder Schrempf New
[v2,3/3] serial: 8250: Remove check for specific mctrl_gpio_init() return value [v2,1/3] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib - - - 0 0 0 2019-08-01 Frieder Schrempf New
[v2,2/3] serial: sh-sci: Remove check for specific mctrl_gpio_init() return value [v2,1/3] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib - - - 0 0 0 2019-08-01 Frieder Schrempf New
[v2,1/3] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib [v2,1/3] serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib - 1 - 0 0 0 2019-08-01 Frieder Schrempf New
serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib - 1 - 0 0 0 2019-08-01 Frieder Schrempf New
serial: imx: Avoid probe failure in case of missing gpiolib serial: imx: Avoid probe failure in case of missing gpiolib - - - 0 0 0 2019-08-01 Frieder Schrempf New
[v8,6/7] ARM64: dts: ls1046a: Remove fsl,qspi-has-second-chip as it is not used Untitled series #62843 - - - 0 0 0 2019-01-07 Frieder Schrempf New
[v8,5/7] ARM: dts: ls1021a: Remove fsl, qspi-has-second-chip as it is not used Untitled series #62843 - - - 0 0 0 2019-01-07 Frieder Schrempf New
[5/5] ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Prepare devicetrees for the new FSL QSPI driver - - - 0 0 0 2018-12-10 Frieder Schrempf New
[4/5] arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Prepare devicetrees for the new FSL QSPI driver - - - 0 0 0 2018-12-10 Frieder Schrempf New
[v7,8/9] ARM64: dts: ls1046a: Remove fsl,qspi-has-second-chip as it is not used [v7,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-12-04 Frieder Schrempf New
[v7,7/9] ARM: dts: ls1021a: Remove fsl, qspi-has-second-chip as it is not used [v7,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-12-04 Frieder Schrempf New
[v7,2/9] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties [v7,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-12-04 Frieder Schrempf New
[v7,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties [v7,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-12-04 Frieder Schrempf New
[v6,8/9] ARM64: dts: ls1046a: Remove fsl,qspi-has-second-chip as it is not used [v6,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-27 Frieder Schrempf New
[v6,7/9] ARM: dts: ls1021a: Remove fsl, qspi-has-second-chip as it is not used [v6,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-27 Frieder Schrempf New
[v6,2/9] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties [v6,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-27 Frieder Schrempf New
[v6,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties [v6,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-27 Frieder Schrempf New
[v5,8/9] ARM64: dts: ls1046a: Remove fsl,qspi-has-second-chip as it is not used [v5,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-13 Frieder Schrempf New
[v5,7/9] ARM: dts: ls1021a: Remove fsl, qspi-has-second-chip as it is not used [v5,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-13 Frieder Schrempf New
[v5,2/9] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties [v5,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-13 Frieder Schrempf New
[v5,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties [v5,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties - - - 0 0 0 2018-11-13 Frieder Schrempf New
[v4,09/10] ARM64: dts: ls1046a: Remove fsl, qspi-has-second-chip as it is not used Untitled series #39869 - - - 0 0 0 2018-11-07 Frieder Schrempf New
[v4,08/10] ARM: dts: ls1021a: Remove fsl, qspi-has-second-chip as it is not used Untitled series #39869 - - - 0 0 0 2018-11-07 Frieder Schrempf New
[v4,06/10] ARM: defconfig: Use the new FSL QSPI driver under the SPI framework Untitled series #39869 - - - 0 0 0 2018-11-07 Frieder Schrempf New
[v4,05/10] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties Untitled series #39869 - - - 0 0 0 2018-11-07 Frieder Schrempf New
[v4,04/10] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties Untitled series #39869 - - - 0 0 0 2018-11-07 Frieder Schrempf New