Show patches with: Submitter = Huang Shijie       |   280 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
ARM: clk: imx: remove the CLK_SET_RATE_NO_REPARENT for imx_clk_mux_flags - - - 0 0 0 2014-05-26 Huang Shijie New
[2/2] ARM: clk-imx6sx: register the qspi's clock with re-parent capability - - - 0 0 0 2014-05-26 Huang Shijie New
[1/2] ARM: clk: imx: add a new helper which can re-parent the clock - - - 0 0 0 2014-05-26 Huang Shijie New
[1/2,rebased] serial: imx: remove the DMA wait queue - - - 0 0 0 2014-05-23 Huang Shijie New
[2/2] serial: imx: disable the receiver ready interrupt for imx_stop_rx - - - 0 0 0 2014-05-23 Huang Shijie New
[1/2] serial: imx: remove the DMA wait queue - - - 0 0 0 2014-05-23 Huang Shijie New
[2/2,v2] serial: imx: remove the redundant code - - - 0 0 0 2014-05-21 Huang Shijie New
[2/2] serial: imx: remove the redandunt code - - - 0 0 0 2014-05-21 Huang Shijie New
[1/2,bugfix] serial: imx: reset the uart port all the time - - - 0 0 0 2014-05-21 Huang Shijie New
[v2,10/10] mtd: fsl-quadspi: add DDR quad read support for Micron - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,09/10] mtd: spi-nor: add DDR quad read support for Micron - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,08/10] mtd: spi-nor: add more read transfer flags for n25q256a - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,07/10] mtd: fsl-quadspi: add the DDR quad read support for Spansion NOR - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,06/10] mtd: fsl-quadspi: use the information stored in spi-nor{} - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,05/10] Documentation: fsl-quadspi: update the document - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,04/10] Documentation: mtd: add a new document for SPI NOR flash - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,03/10] mtd: spi-nor: add DDR quad read support - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,02/10] mtd: spi-nor: add a new field for spi_nor{} - - - 0 0 0 2014-04-28 Huang Shijie New
[v2,01/10] mtd: spi-nor: fix the wrong dummy value - - - 0 0 0 2014-04-28 Huang Shijie New
[v1,7/7] mtd: fsl-quadspi: add the DDR quad read support - - - 0 0 0 2014-04-23 Huang Shijie New
[v1,6/7] mtd: fsl-quadspi: use the information stored in spi-nor{} - - - 0 0 0 2014-04-23 Huang Shijie New
[v1,5/7] mtd: fsl-quadspi: get the dummy cycles for DDR Quad read from the DT property - - - 0 0 0 2014-04-23 Huang Shijie New
[v1,4/7] Documentation: fsl-quadspi: update the document - - - 0 0 0 2014-04-23 Huang Shijie New
[v1,3/7] Documentation: mtd: add a new document for SPI NOR flash - - - 0 0 0 2014-04-23 Huang Shijie New
[v1,2/7] mtd: spi-nor: add DDR quad read support - - - 0 0 0 2014-04-23 Huang Shijie New
[v1,1/7] mtd: spi-nor: fix the wrong dummy value - - - 0 0 0 2014-04-23 Huang Shijie New
[v5,4/8,fix] Documentation: add the document for the SPI NOR framework - - - 0 0 0 2014-02-28 Huang Shijie New
[v5,5/8,fix] mtd: m25p80: use the SPI nor framework - - - 0 0 0 2014-02-28 Huang Shijie New
[v5,8/8] mtd: spi-nor: Add Freescale QuadSPI driver - - - 0 0 0 2014-02-24 Huang Shijie New
[v5,7/8] Documentation: add the binding file for Freescale QuadSPI driver - - - 0 0 0 2014-02-24 Huang Shijie New
[v5,6/8] mtd: spi-nor: add a helper to find the spi_device_id - - - 0 0 0 2014-02-24 Huang Shijie New
[v5,5/8] mtd: m25p80: use the SPI nor framework - - - 0 0 0 2014-02-24 Huang Shijie New
[v5,4/8] Documentation: add the document for the SPI NOR framework - - - 0 0 0 2014-02-24 Huang Shijie New
[v5,3/8] mtd: spi-nor: add the framework for SPI NOR - - - 0 0 0 2014-02-24 Huang Shijie New
[v5,2/8] mtd: spi-nor: add the basic data structures - - - 0 0 0 2014-02-24 Huang Shijie New
[v5,1/8] mtd: spi-nor: copy the SPI NOR commands to a new header file - - - 0 0 0 2014-02-24 Huang Shijie New
[fix] mtd: nand: kill the the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE for nand_buffers{} - - - 0 0 0 2014-01-13 Huang Shijie New
[3/3] mtd: gpmi: add subpage read support - - - 0 0 0 2014-01-03 Huang Shijie New
[2/3] mtd: gpmi: do not use the mtd->writesize - - - 0 0 0 2014-01-03 Huang Shijie New
[1/3] mtd: nand: add "page" argument for read_subpage hook - - - 0 0 0 2014-01-03 Huang Shijie New
ARM: dts: vf610: use the interrupt macros - - - 0 0 0 2013-12-25 Huang Shijie New
[v4,7/7] mtd: spi-nor: Add Freescale QuadSPI driver - - - 0 0 0 2013-12-25 Huang Shijie New
[v4,6/7] Documentation: add the binding file for Freescale QuadSPI driver - - - 0 0 0 2013-12-25 Huang Shijie New
[v4,5/7] mtd: spi-nor: add a helper to find the spi_device_id - - - 0 0 0 2013-12-25 Huang Shijie New
[v4,4/7] mtd: m25p80: use the SPI nor framework - - - 0 0 0 2013-12-25 Huang Shijie New
[v4,3/7] mtd: spi-nor: add the framework for SPI NOR - - - 0 0 0 2013-12-25 Huang Shijie New
[v4,2/7] mtd: spi-nor: add the basic data structures - - - 0 0 0 2013-12-25 Huang Shijie New
[v4,1/7] mtd: spi-nor: copy the SPI NOR commands to a new header file - - - 0 0 0 2013-12-25 Huang Shijie New
[v3,7/7] mtd: spi-nor: Add Freescale QuadSpi driver - - - 0 0 0 2013-12-16 Huang Shijie New
[v3,6/7] Documentation: add the binding file for Quadspi driver - - - 0 0 0 2013-12-16 Huang Shijie New
[v3,5/7] mtd: spi-nor: add a helper to find the spi_device_id - - - 0 0 0 2013-12-16 Huang Shijie New
[v3,4/7] mtd: m25p80: use the SPI nor framework - - - 0 0 0 2013-12-16 Huang Shijie New
[v3,3/7] mtd: spi-nor: add the framework for SPI NOR - - - 0 0 0 2013-12-16 Huang Shijie New
[v3,2/7] mtd: spi-nor: add the basic data structures - - - 0 0 0 2013-12-16 Huang Shijie New
[v3,1/7] mtd: spi-nor: copy the SPI NOR commands to a new header file - - - 0 0 0 2013-12-16 Huang Shijie New
mtd: m25p80: use the SPI nor framework - - - 0 0 0 2013-12-06 Huang Shijie New
[V2,3/4] mtd: spi-nor: add the framework for SPI NOR - - - 0 0 0 2013-12-06 Huang Shijie New
[V2,2/4] mtd: spi-nor: add the basic data structures - - - 0 0 0 2013-12-06 Huang Shijie New
[V2,1/4] mtd: spi-nor: copy the SPI NOR commands to a new header file - - - 0 0 0 2013-12-06 Huang Shijie New
serial: imx: add support for loopback mode. - - - 0 0 0 2013-11-29 Huang Shijie New
[4/4] mtd: m25p80: use the new spi-nor APIs - - - 0 0 0 2013-11-26 Huang Shijie New
[3/4] mtd: spi-nor: add the framework for SPI NOR - - - 0 0 0 2013-11-26 Huang Shijie New
[2/4] mtd: spi-nor: add a new data structrue spi_nor{} - - - 0 0 0 2013-11-26 Huang Shijie New
[1/4] mtd: spi-nor: move the SPI NOR commands to a new header file - - - 0 0 0 2013-11-26 Huang Shijie New
[bugfix] mtd: gpmi: serialize all the dma operations - - - 0 0 0 2013-11-06 Huang Shijie New
spi: spi-imx: only enable the clocks when we start to transfer a message - - - 0 0 0 2013-10-23 Huang Shijie New
[2/2] ARM: dts: imx6sl-evk: enable the SPI NOR - - - 0 0 0 2013-10-18 Huang Shijie New
[1/2] ARM: dts: imx6sl: add a pinctrl for ECSPI1 - - - 0 0 0 2013-10-18 Huang Shijie New
serail: imx: optimization: remove the workqueues for DMA - - - 0 0 0 2013-10-15 Huang Shijie New
[4/4] serial: imx: use the dmaengine_tx_status - - - 0 0 0 2013-10-11 Huang Shijie New
[3/4] serial: imx: fix the wrong number of scatterlist entries when xmit->head is 0 - - - 0 0 0 2013-10-11 Huang Shijie New
[2/4] serial: imx: check the DMA for imx_tx_empty - - - 0 0 0 2013-10-11 Huang Shijie New
[1/4] serial: imx: implement the flush_buffer hook - - - 0 0 0 2013-10-11 Huang Shijie New
ARM: dts: imx6q: fix the wrong offset of the Pad Mux register - - - 0 0 0 2013-09-16 Huang Shijie New
[v3,8/8] ARM: dts: vf610-twr: Add SPI NOR support - - - 0 0 0 2013-08-30 Huang Shijie New
[v3,7/8] ARM: dts: vf610: change the PAD values for Quadspi - - - 0 0 0 2013-08-30 Huang Shijie New
[v3,6/8] Documentation: add the binding file for Quadspi driver - - - 0 0 0 2013-08-30 Huang Shijie New
[v3,5/8] spi: Add Freescale QuadSpi driver - - - 0 0 0 2013-08-30 Huang Shijie New
[v3,4/8] mtd: m25p80: add the DDR quad-read support - - - 0 0 0 2013-08-30 Huang Shijie New
[v3,3/8] mtd: m25p80: add the quad-read support - - - 0 0 0 2013-08-30 Huang Shijie New
[v3,2/8] mtd: m25p80: add support for Spansion s25fl128s chip - - - 0 0 0 2013-08-30 Huang Shijie New
[v3,1/8] mtd: m25p80: move the spi-nor commands to a header - - - 0 0 0 2013-08-30 Huang Shijie New
serial: imx: initialize the local variable - - - 0 0 0 2013-08-29 Huang Shijie New
[v2,8/8] ARM: dts: vf610-twr: Add SPI NOR support - - - 0 0 0 2013-08-26 Huang Shijie New
[v2,7/8] ARM: dts: vf610: change the PAD values for Quadspi - - - 0 0 0 2013-08-26 Huang Shijie New
[v2,6/8] Documentation: add the binding file for Quadspi driver - - - 0 0 0 2013-08-26 Huang Shijie New
[v2,5/8] spi: Add Freescale QuadSpi driver - - - 0 0 0 2013-08-26 Huang Shijie New
[v2,4/8] mtd: m25p80: add the DDR quad-read support - - - 0 0 0 2013-08-26 Huang Shijie New
[v2,3/8] mtd: m25p80: add the quad-read support - - - 0 0 0 2013-08-26 Huang Shijie New
[v2,2/8] mtd: m25p80: add support for Spansion s25fl128s chip - - - 0 0 0 2013-08-26 Huang Shijie New
[v2,1/8] mtd: m25p80: move the spi-nor commands to a header - - - 0 0 0 2013-08-26 Huang Shijie New
[V1,5/5] ARM: dts: vf610-twr: Add SPI NOR support - - - 0 0 0 2013-08-19 Huang Shijie New
[V1,4/5] spi: Add Freescale QuadSpi driver - - - 0 0 0 2013-08-19 Huang Shijie New
[V1,3/5] mtd: m25p80: add the quad-read support - - - 0 0 0 2013-08-19 Huang Shijie New
[V1,2/5] mtd: m25p80: add support for Spansion s25fl128s chip - - - 0 0 0 2013-08-19 Huang Shijie New
[V1,1/5] mtd: m25p80: move the spi-nor commands to a header - - - 0 0 0 2013-08-19 Huang Shijie New
[v2,3/3] ARM: dts: imx28-evk: add the RTS/CTS property for auart0 - - - 0 0 0 2013-07-16 Huang Shijie New
[v2,2/3] serial: mxs: enable the DMA only when the RTS/CTS is valid - - - 0 0 0 2013-07-16 Huang Shijie New
[v2,1/3] serial: mxs: remove the MXS_AUART_DMA_CONFIG - - - 0 0 0 2013-07-16 Huang Shijie New
[3/3] ARM: dts: imx28-evk: add the rts/cts property for auart0 - - - 0 0 0 2013-07-15 Huang Shijie New
« 1 2 3 »