Show patches with: Submitter = Huang Shijie       |   280 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[2/3] serial: mxs: enable the DMA only when the rts/cts is enabled - - - --- 2013-07-15 Huang Shijie New
[1/3] serial: mxs: remove the unused macro - - - --- 2013-07-15 Huang Shijie New
ARM: dts: imx6qdl/imx6sl: add the dma property for uart - - - --- 2013-07-12 Huang Shijie New
[fix] ARM: dts: imx6qdl-sabreauto: add a DT node for uart3 - - - --- 2013-07-12 Huang Shijie New
[rebased,2/2] ARM: dts: imx6qdl-sabreauto: add a DT node for uart3 - - - --- 2013-07-12 Huang Shijie New
[rebased,1/2] ARM: dts: imx6qdl: add a new pinctrl for uart3 - - - --- 2013-07-12 Huang Shijie New
[2/2] ARM: dts: imx6q{dl}-sabreauto: add a DT node for uart3 - - - --- 2013-07-10 Huang Shijie New
[1/2] ARM: dts: imx6q{dl}: add a new pinctrl for uart3 - - - --- 2013-07-10 Huang Shijie New
[v4,6/6] ARM: dts: enable the uart2 for imx6q-arm2 - - - --- 2013-07-08 Huang Shijie New
[v4,5/6] ARM: dts: imx6q{dl}: add a DTE uart pinctrl for uart2 - - - --- 2013-07-08 Huang Shijie New
[v4,4/6] ARM: dts: imx6q{dl}: add DTE pads for uart - - - --- 2013-07-08 Huang Shijie New
[v4,3/6] ARM: dts: imx6sl: add "fsl, imx6q-uart" for uart compatible - - - --- 2013-07-08 Huang Shijie New
[v4,2/6] serial: imx: add DMA support for imx6q - - - --- 2013-07-08 Huang Shijie New
[v4,1/6] serial: imx: distinguish the imx6q uart from the others - - - --- 2013-07-08 Huang Shijie New
ARM: imx_v6_v7_defconfig: enable WEIM driver - - - --- 2013-07-08 Huang Shijie New
of: match the compatible in the order set by the dts file - - - --- 2013-07-05 Huang Shijie New
dma: imx-sdma: remove the unused completion - - - --- 2013-07-05 Huang Shijie New
[v3,6/6] ARM: dts: enable the uart2 for imx6q-arm2 - - - --- 2013-07-05 Huang Shijie New
[v3,5/6] ARM: dts: imx6q{dl}: add a DTE uart pinctrl for uart2 - - - --- 2013-07-05 Huang Shijie New
[v3,4/6] ARM: dts: imx6q{dl}: fix the wrong RTS/CTS pad name - - - --- 2013-07-05 Huang Shijie New
[v3,3/6] ARM: dts: imx6sl: add "fsl, imx6q-uart" for uart compatible - - - --- 2013-07-05 Huang Shijie New
[v3,2/6] serial: imx: add DMA support for imx6q - - - --- 2013-07-05 Huang Shijie New
[v3,1/6] serial: imx: distinguish the imx6q uart from the others - - - --- 2013-07-05 Huang Shijie New
[v2,5/5] ARM: dts: enable the uart2 for imx6q-arm2 - - - --- 2013-07-03 Huang Shijie New
[v2,4/5] ARM: dts: imx6q: add dte pinctrl for uart2 - - - --- 2013-07-03 Huang Shijie New
[v2,3/5] ARM: dts: imx6sl: add "fsl, imx6q-uart" for uart compatible - - - --- 2013-07-03 Huang Shijie New
[v2,2/5] serial: imx: add DMA support for imx6q - - - --- 2013-07-03 Huang Shijie New
[v2,1/5] serial: imx: distinguish the imx6q uart from the others - - - --- 2013-07-03 Huang Shijie New
[5/5] ARM: dts: enable the uart2 for imx6q-arm2 - - - --- 2013-07-02 Huang Shijie New
[4/5] ARM: dts: imx6: add dte pinctrl for uart2 - - - --- 2013-07-02 Huang Shijie New
[3/5] ARM: dts: imx6: rename the uart's compatible property - - - --- 2013-07-02 Huang Shijie New
[2/5] serial: imx: add DMA support for imx6 - - - --- 2013-07-02 Huang Shijie New
[1/5] serial: imx: distinguish the imx6 uart from the others - - - --- 2013-07-02 Huang Shijie New
ARM: dts: imx: add #dma-cells property for sdma - - - --- 2013-07-02 Huang Shijie New
ARM: dts: imx6: add #dma-cells property for sdma - - - --- 2013-07-01 Huang Shijie New
ARM: dts: imx: remove the unused property - - - --- 2013-06-28 Huang Shijie New
[v2] serial: imx: remove the uart_console() check - - - --- 2013-06-28 Huang Shijie New
[2/2] serial: imx: check the return value when enabling the clocks - - - --- 2013-06-26 Huang Shijie New
[1/2] serial: imx: remove the uart_console() check - - - --- 2013-06-26 Huang Shijie New
[v2,3/3] ARM: dts: imx6qdl-sabresd: enable the SPI NOR - - - --- 2013-06-21 Huang Shijie New
[v2,2/3] ARM: dts: imx6q: add a new pinctrl for ecspi1 - - - --- 2013-06-21 Huang Shijie New
[v2,1/3] ARM: dts: imx6dl: add a new pinctrl for ecspi1 - - - --- 2013-06-21 Huang Shijie New
[3/3] ARM: dts: imx6qdl-sabresd: enable the SPI NOR - - - --- 2013-06-20 Huang Shijie New
[2/3] ARM: dts: imx6q: add a new pinctrl for ecspi1 - - - --- 2013-06-20 Huang Shijie New
[1/3] ARM: dts: imx6dl: add a new pinctrl for ecspi1 - - - --- 2013-06-20 Huang Shijie New
[4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy - - - --- 2013-06-14 Huang Shijie New
[3/4] mtd: gpmi: scan two nand chips - - - --- 2013-06-14 Huang Shijie New
[2/4] mtd: gpmi: use DMA channel 0 for all the nand chips - - - --- 2013-06-14 Huang Shijie New
[1/4] mtd: gpmi: decouple the chip select from the DMA channel - - - --- 2013-06-14 Huang Shijie New
[2/2] ARM: mm: dump the memblock info in the later place - - - --- 2013-06-13 Huang Shijie New
[1/2] ARM: mmu: fix the hang when we steal a section unaligned size memory - - - --- 2013-06-13 Huang Shijie New
[v2] serial: imx: enable the clocks for console - - - --- 2013-06-09 Huang Shijie New
serial: imx: enable the clocks for console - - - --- 2013-06-08 Huang Shijie New
[V2] serial: imx: enable the clocks only when the uart is used - - - --- 2013-06-04 Huang Shijie New
serial: imx: enable the clocks only when the uart is used - - - --- 2013-06-03 Huang Shijie New
serail: imx: add support for DTE mode - - - --- 2013-05-30 Huang Shijie New
[v4,6/6] ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR - - - --- 2013-05-28 Huang Shijie New
[v4,5/6] ARM: dts: imx6dl: add pinctrls for WEIM NOR - - - --- 2013-05-28 Huang Shijie New
[v4,4/6] ARM: dts: imx6q: add pinctrls for WEIM NOR - - - --- 2013-05-28 Huang Shijie New
[v4,3/6] ARM: dts: imx6qdl: add more information for WEIM - - - --- 2013-05-28 Huang Shijie New
[v4,2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM - - - --- 2013-05-28 Huang Shijie New
[v4,1/6] drivers: bus: add a new driver for WEIM - - - --- 2013-05-28 Huang Shijie New
[v3,6/6] ARM: dts: imx6qdl: enable the WEIM NOR - - - --- 2013-05-24 Huang Shijie New
[v3,5/6] ARM: dts: imx6dl: add pinctrls for WEIM NOR - - - --- 2013-05-24 Huang Shijie New
[v3,4/6] ARM: dts: imx6q: add pinctrls for WEIM NOR - - - --- 2013-05-24 Huang Shijie New
[v3,3/6] ARM: dts: imx6qdl: add more information for WEIM - - - --- 2013-05-24 Huang Shijie New
[v3,2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM - - - --- 2013-05-24 Huang Shijie New
[v3,1/6] drivers: bus: add a new driver for WEIM - - - --- 2013-05-24 Huang Shijie New
[V2,6/6] ARM: dts: imx6qdl: enable the WEIM NOR - - - --- 2013-05-23 Huang Shijie New
[V2,5/6] ARM: dts: imx6dl: add a pinctrl for WEIM NOR - - - --- 2013-05-23 Huang Shijie New
[V2,4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR - - - --- 2013-05-23 Huang Shijie New
[V2,3/6] ARM: dts: imx6qdl: add more information for WEIM - - - --- 2013-05-23 Huang Shijie New
[V2,2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM - - - --- 2013-05-23 Huang Shijie New
[V2,1/6] drivers: bus: add a new driver for WEIM - - - --- 2013-05-23 Huang Shijie New
[6/6] ARM: dts: imx6qdl: enable the WEIM NOR - - - --- 2013-05-20 Huang Shijie New
[5/6] ARM: dts: imx6ql: add a pinctrl for WEIM NOR - - - --- 2013-05-20 Huang Shijie New
[4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR - - - --- 2013-05-20 Huang Shijie New
[3/6] ARM: dts: imx6qdl: add more information for WEIM - - - --- 2013-05-20 Huang Shijie New
[2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM - - - --- 2013-05-20 Huang Shijie New
[1/6] drivers: bus: add a new driver for WEIM - - - --- 2013-05-20 Huang Shijie New
ARM: imx6q: clk: add the eim_slow clock - - - --- 2013-05-17 Huang Shijie New
[5/5] ARM: dts: add SPI/NOR for mx6q{dl}-sabreauto boards - - - --- 2013-05-09 Huang Shijie New
[4/5] ARM: dts: imx6q: add a gpio for hog - - - --- 2013-05-09 Huang Shijie New
[3/5] ARM: dts: imx6dl: add a gpio for hog - - - --- 2013-05-09 Huang Shijie New
[2/5] ARM: dts: imx6dl: add a pinctrl for eCSPI1 - - - --- 2013-05-09 Huang Shijie New
[1/5] ARM: dts: imx6q: add a new device node for ecspi1 - - - --- 2013-05-09 Huang Shijie New
[3/3] ARM: dts: enable the gpmi-nand for imx6q{dl}-sabreauto boards - - - --- 2013-05-07 Huang Shijie New
[2/3] ARM: dts: imx6dl: add pinctrl for gpmi-nand - - - --- 2013-05-07 Huang Shijie New
[1/3] ARM: dts: imx6q: remove the unused pins for gpmi-nand - - - --- 2013-05-07 Huang Shijie New
[2/2] pinctrl: imx: use pin_func_ids to search the pinctrl item. - - - --- 2013-02-27 Huang Shijie New
[1/2] pinctrl: imx6q: add DTE pinctrl items for mx6q uart - - - --- 2013-02-27 Huang Shijie New
[v2] mtd: gpmi: add sanity check for the ECC - - - --- 2013-01-29 Huang Shijie New
[2/2] mtd: gpmi: add sanity check for the ECC strength - - - --- 2013-01-25 Huang Shijie New
[1/2] mtd: gpmi: set the Golois Field bit for mx6q's BCH - - - --- 2013-01-25 Huang Shijie New
mtd: gpmi: fix a dereferencing freed memory error - - - --- 2013-01-23 Huang Shijie New
mtd: gpmi: dump the BCH registers - - - --- 2013-01-14 Huang Shijie New
[v3,3/3] ARM: dts: enable dma support for auart0 in mx28 - - - --- 2012-11-16 Huang Shijie New
[v3,2/3] serial: mxs-auart: add the DMA support for mx28 - - - --- 2012-11-16 Huang Shijie New
[v3,1/3] serial: mxs-auart: distinguish the different SOCs - - - --- 2012-11-16 Huang Shijie New
[v2,2/3] serial: mxs-auart: add the DMA support for mx28 - - - --- 2012-11-15 Huang Shijie New
« 1 2 3 »