Show patches with: Submitter = Martin Blumenstingl       |    State = Action Required       |   697 patches
« 1 2 ... 4 5 6 7 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/4] pinctrl: meson: meson8b: add the PWM pins - - - --- 2017-05-04 Martin Blumenstingl New
[1/1] clk: meson: meson8b: mark clk81 as critical - - - --- 2017-05-04 Martin Blumenstingl New
[v2,2/2] clk: meson: gxbb: remove the "cpu_clk" from the GXBB and GXL driver - - - --- 2017-05-04 Martin Blumenstingl New
[v2,1/2] clk: meson-gxbb: un-export the CPU clock - - - --- 2017-05-04 Martin Blumenstingl New
[v3,3/3] iio: adc: meson-saradc: add Meson8b SoC compatibility - - - --- 2017-05-04 Martin Blumenstingl New
[v3,2/3] dt-bindings: iio: adc: add Meson8 and Meson8b support 1 - - --- 2017-05-04 Martin Blumenstingl New
[v3,1/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const - - - --- 2017-05-04 Martin Blumenstingl New
[1/1] ARM: dts: meson: Extend L2 cache controller node for Meson8 and Meson8b - - - --- 2017-04-17 Martin Blumenstingl New
[2/2] ARM: dts: meson8b: inherit meson.dtsi from meson8b.dtsi - - - --- 2017-04-17 Martin Blumenstingl New
[1/2] ARM: dts: meson: organize devices in their corresponding busses - - - --- 2017-04-17 Martin Blumenstingl New
[v3,2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM - - - --- 2017-04-17 Martin Blumenstingl New
[v3,1/2] Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY 1 - - --- 2017-04-17 Martin Blumenstingl New
[3/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const - - - --- 2017-04-17 Martin Blumenstingl New
[2/3] iio: adc: meson-saradc: add Meson8b SoC compatibility - - - --- 2017-04-17 Martin Blumenstingl New
[1/3] Documentation: dt-bindings: iio: adc: add Meson8 and Meson8b support 1 - - --- 2017-04-17 Martin Blumenstingl New
[v2,2/2] pinctrl: meson: meson8b: rename the NAND DQS pin definitions 1 - - --- 2017-04-01 Martin Blumenstingl New
[v2,1/2] pinctrl: meson: meson8b: fix the NAND DQS pins 1 - - --- 2017-04-01 Martin Blumenstingl New
[1/1] clk: meson: meson8b: add support for the NAND clocks - - - --- 2017-04-01 Martin Blumenstingl New
[2/2] clk: meson: mpll: use 64bit math in rate_from_params - - - --- 2017-04-01 Martin Blumenstingl New
[1/2] clk: meson: mpll: fix division by zero in rate_from_params - - - --- 2017-04-01 Martin Blumenstingl New
[1/1] clk: meson: gxbb: remove the "cpu_clk" from the GXBB and GXL driver - - - --- 2017-04-01 Martin Blumenstingl New
[RFC] clk: meson: gxbb: remove the "cpu_clk" - - - --- 2017-03-26 Martin Blumenstingl New
[1/1] pinctrl: meson: meson8b: fix the NAND DQS pins - - - --- 2017-03-25 Martin Blumenstingl New
[2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility - - - --- 2017-03-25 Martin Blumenstingl New
[1/2] Documentation: dt-bindings: add a Meson8b compatible to the SAR ADC 1 - - --- 2017-03-25 Martin Blumenstingl New
[RFT,1/1] ARM64: dts: meson-gxbb: convert devices to use pwm-leds - - - --- 2017-03-18 Martin Blumenstingl New
[v2,2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM - - - --- 2017-03-18 Martin Blumenstingl New
[v2,1/2] Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY 1 - - --- 2017-03-18 Martin Blumenstingl New
[v2,3/3] ARM64: dts: meson-gxl: add support for the Khadas VIM board - - 1 --- 2017-03-18 Martin Blumenstingl New
[v2,2/3] dt-bindings: amlogic: add the Khadas VIM 1 - - --- 2017-03-18 Martin Blumenstingl New
[v2,1/3] devicetree: add vendor prefix for Khadas 1 - - --- 2017-03-18 Martin Blumenstingl New
[v2,2/2] ARM64: dts: amlogic: meson-gxl: add the missing PWM pins 1 1 1 --- 2017-03-18 Martin Blumenstingl New
[v2,1/2] pinctrl: meson: gxl: add the missing PWM pin definitions - 1 1 --- 2017-03-18 Martin Blumenstingl New
[2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM - - - --- 2017-03-04 Martin Blumenstingl New
[1/2] Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY 1 - - --- 2017-03-04 Martin Blumenstingl New
[3/3] ARM64: dts: meson-gxl: add support for the Khadas VIM board - - - --- 2017-03-04 Martin Blumenstingl New
[2/3] dt-bindings: amlogic: add the Khadas VIM 1 - - --- 2017-03-04 Martin Blumenstingl New
[1/3] devicetree: add vendor prefix for Khadas 1 - - --- 2017-03-04 Martin Blumenstingl New
[2/2] ARM64: dts: amlogic: meson-gxl: add the missing PWM pins - - - --- 2017-03-04 Martin Blumenstingl New
[1/2] pinctrl: meson: gxl: add the missing PWM pin definitions - - - --- 2017-03-04 Martin Blumenstingl New
[v2] phy: meson8b-usb2: fix offsets for some of the registers - 1 - --- 2017-03-04 Martin Blumenstingl New
[v2,1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design - - 1 --- 2017-03-04 Martin Blumenstingl New
[1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design - - 1 --- 2017-02-19 Martin Blumenstingl New
[1/1] ARM64: defconfig: enable the leds-pwm driver and default-on trigger - - - --- 2017-02-19 Martin Blumenstingl New
[v5,9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx - - - --- 2017-02-19 Martin Blumenstingl New
[v5,8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration - - 1 --- 2017-02-19 Martin Blumenstingl New
[v5,7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support 1 - - --- 2017-02-19 Martin Blumenstingl New
[v5,6/9] ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO - - 1 --- 2017-02-19 Martin Blumenstingl New
[v5,5/9] ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO - - - --- 2017-02-19 Martin Blumenstingl New
[v5,4/9] ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO - - 1 --- 2017-02-19 Martin Blumenstingl New
[v5,3/9] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO - - - --- 2017-02-19 Martin Blumenstingl New
[v5,2/9] ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO - - 1 --- 2017-02-19 Martin Blumenstingl New
[v5,1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO - - 1 --- 2017-02-19 Martin Blumenstingl New
[v2] Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported 1 1 - --- 2017-02-01 Martin Blumenstingl New
Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported 1 - - --- 2017-01-31 Martin Blumenstingl New
[3/3] ARM64: dts: meson-gxl: add the pwm_ao_b pin - - - --- 2017-01-22 Martin Blumenstingl New
[2/3] pinctrl: meson: meson-gxl: add the pwm_ao_b pin 1 - - --- 2017-01-22 Martin Blumenstingl New
[1/3] ARM64: dts: meson-gx: add the missing pwm_AO_ab node - - - --- 2017-01-22 Martin Blumenstingl New
[v4,3/3] ARM64: dts: meson: meson-gx: add the SAR ADC - 1 1 --- 2017-01-22 Martin Blumenstingl New
[v4,2/3] iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs - - 1 --- 2017-01-22 Martin Blumenstingl New
[v4,1/3] Documentation: dt-bindings: add the Amlogic Meson SAR ADC documentation 1 1 1 --- 2017-01-22 Martin Blumenstingl New
[v4,9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx - - - --- 2017-01-22 Martin Blumenstingl New
[v4,8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration - - 1 --- 2017-01-22 Martin Blumenstingl New
[v4,7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support 1 - - --- 2017-01-22 Martin Blumenstingl New
[v4,6/9] ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-22 Martin Blumenstingl New
[v4,5/9] ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO - - - --- 2017-01-22 Martin Blumenstingl New
[v4,4/9] ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-22 Martin Blumenstingl New
[v4,3/9] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO - - - --- 2017-01-22 Martin Blumenstingl New
[v4,2/9] ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-22 Martin Blumenstingl New
[v4,1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-22 Martin Blumenstingl New
[v3,9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx - - - --- 2017-01-20 Martin Blumenstingl New
[v3,8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration - - 1 --- 2017-01-20 Martin Blumenstingl New
[v3,7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support 1 - - --- 2017-01-20 Martin Blumenstingl New
[v3,6/9] ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-20 Martin Blumenstingl New
[v3,5/9] ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v3,4/9] ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-20 Martin Blumenstingl New
[v3,3/9] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v3,2/9] ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-20 Martin Blumenstingl New
[v3,1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO - - 1 --- 2017-01-20 Martin Blumenstingl New
[v2,9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx - - - --- 2017-01-20 Martin Blumenstingl New
[v2,8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration - - - --- 2017-01-20 Martin Blumenstingl New
[v2,7/9] ARM64: dts: meson-gxbb-p20x: remove the ethernet node - - - --- 2017-01-20 Martin Blumenstingl New
[v2,6/9] ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v2,5/9] ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v2,4/9] ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v2,3/9] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v2,2/9] ARM64: dts: meson-gxbb-p201: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v2,1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO - - - --- 2017-01-20 Martin Blumenstingl New
[v3,4/4] ARM64: dts: meson: meson-gx: add the SAR ADC - 1 1 --- 2017-01-19 Martin Blumenstingl New
[v3,3/4] iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs - - 1 --- 2017-01-19 Martin Blumenstingl New
[v3,2/4] clk: gxbb: add the SAR ADC clocks and expose them 1 - 1 --- 2017-01-19 Martin Blumenstingl New
[v3,1/4] Documentation: dt-bindings: add the Amlogic Meson SAR ADC documentation - 1 1 --- 2017-01-19 Martin Blumenstingl New
[v2,4/4] ARM64: dts: meson: meson-gx: add the SAR ADC - - - --- 2017-01-15 Martin Blumenstingl New
[v2,3/4] iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs - - - --- 2017-01-15 Martin Blumenstingl New
[v2,2/4] clk: gxbb: add the SAR ADC clocks and expose them - - - --- 2017-01-15 Martin Blumenstingl New
[v2,1/4] Documentation: dt-bindings: add the Amlogic Meson SAR ADC documentation - - - --- 2017-01-15 Martin Blumenstingl New
[4/4] ARM64: dts: meson-gxbb-vega-s95: enable the Bluetooth module - - 1 --- 2017-01-15 Martin Blumenstingl New
[3/4] ARM64: dts: meson-gx-p23x-q20x: enable the Bluetooth module - - - --- 2017-01-15 Martin Blumenstingl New
[2/4] ARM64: dts: meson-gx: add the serial CTS and RTS pin groups - - 1 --- 2017-01-15 Martin Blumenstingl New
[1/4] tty: serial: meson: allow baud-rates higher than 115200 1 - 1 --- 2017-01-15 Martin Blumenstingl New
« 1 2 ... 4 5 6 7 »