Show patches with: Submitter = Rafał Miłecki       |    State = Action Required       |   371 patches
« 1 2 3 4 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[0/3] nvmem: allow specifying cells by just names in DT - - - --- 2022-01-24 Rafał Miłecki New
[1/2] ARM: BCM5301X: Specify NAND chip select and ECC in separated files - - - --- 2016-06-06 Rafał Miłecki New
[1/2] ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch [1/2] ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch - - - --- 2021-09-20 Rafał Miłecki New
[1/2] ARM: dts: BCM53573: Describe Tenda AC9 PCIe card in DT - - - --- 2017-02-14 Rafał Miłecki New
[1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger 1 - - --- 2017-03-08 Rafał Miłecki New
[1/2] arm64: add config for Broadcom BCM4908 SoCs [1/2] arm64: add config for Broadcom BCM4908 SoCs - - - --- 2020-10-28 Rafał Miłecki New
[1/2] dt-bindings: arm: Add Asus GT-AX6000 based on BCM4912 [1/2] dt-bindings: arm: Add Asus GT-AX6000 based on BCM4912 1 - - --- 2022-07-13 Rafał Miłecki New
[1/2] dt-bindings: arm: bcm: document Netgear R8000P binding [1/2] dt-bindings: arm: bcm: document Netgear R8000P binding 1 - - --- 2020-12-08 Rafał Miłecki New
[1/2] dt-bindings: arm: bcm: document Netgear RAXE500 binding [1/2] dt-bindings: arm: bcm: document Netgear RAXE500 binding 1 - - --- 2021-11-05 Rafał Miłecki New
[1/2] dt-bindings: leds: add Broadcom's BCM63xxx controller [1/2] dt-bindings: leds: add Broadcom's BCM63xxx controller - - - --- 2021-11-15 Rafał Miłecki New
[1/2] dt-bindings: nvmem: add binding for I/O mapped NVMEM [1/2] dt-bindings: nvmem: add binding for I/O mapped NVMEM - - - --- 2021-03-04 Rafał Miłecki New
[1/2] dt-bindings: nvmem: extract NVMEM cell to separated file dt-bindings: nvmem: support describing cells - - - --- 2022-01-25 Rafał Miłecki New
[1/2] dt-bindings: PCI: brcmstb: add BCM4908 binding brcmstb: initial work on BCM4908 1 - - --- 2020-11-26 Rafał Miłecki New
[1/2] dt-bindings: pinctrl: document Broadcom Northstar pin mux controller [1/2] dt-bindings: pinctrl: document Broadcom Northstar pin mux controller - 1 - --- 2018-09-19 Rafał Miłecki New
[1/2] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema [1/2] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema 1 - - --- 2021-10-29 Rafał Miłecki New
[1/2] mtd: call of_platform_populate() for MTD partitions [1/2] mtd: call of_platform_populate() for MTD partitions - - - --- 2022-04-06 Rafał Miłecki New
[1/2] mtd: m25p80: get rid of spi_get_device_id - - - --- 2014-09-29 Rafał Miłecki New
[1/2] nvmem: core: support passing DT node in cell info [1/2] nvmem: core: support passing DT node in cell info - - - --- 2022-02-28 Rafał Miłecki New
[1/2] PCI: iproc: Support DT property for ignoring aborts when probing - - - --- 2016-04-09 Rafał Miłecki New
[1/3] ARM: BCM5301X: Add separated DTS include file for BCM47094 - - - --- 2016-09-21 Rafał Miłecki New
[1/3] ARM: BCM5301X: Add USB LED for Buffalo WZR-1750DHP - - - --- 2015-05-13 Rafał Miłecki New
[1/3] ARM: dts: BCM5301X: Fix nodes names [1/3] ARM: dts: BCM5301X: Fix nodes names - - - --- 2021-08-19 Rafał Miłecki New
[1/3] arm64: dts: broadcom: bcm4908: add remaining LED pins [1/3] arm64: dts: broadcom: bcm4908: add remaining LED pins - - - --- 2022-07-18 Rafał Miłecki New
[1/3] dt-bindings: leds: leds-bcm63138: unify full stops in descriptions leds-bcm63138: post apply/review fixes - - - --- 2022-07-17 Rafał Miłecki New
[1/3] dt-bindings: nvmem: make "reg" property optional [1/3] dt-bindings: nvmem: make "reg" property optional - 1 - --- 2022-01-24 Rafał Miłecki New
[1/3] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the json-schema [1/3] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the json-schema - - - --- 2020-12-16 Rafał Miłecki New
[1/3] dt-bindings: watchdog: add Broadcom's BCM63xx watchdog [1/3] dt-bindings: watchdog: add Broadcom's BCM63xx watchdog - - - --- 2021-10-27 Rafał Miłecki New
[1/3] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema [1/3] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema - - - --- 2021-10-28 Rafał Miłecki New
[1/4] dt-bindings: net: add bitfield defines for Ethernet speeds [1/4] dt-bindings: net: add bitfield defines for Ethernet speeds - - - --- 2022-05-03 Rafał Miłecki New
[1/5] ARM: BCM5301X: Fix LAN LED labels for Luxul XWR-3100 - - - --- 2016-12-06 Rafał Miłecki New
[1/5] arm64: dts: broadcom: bcm4908: describe USB PHY [1/5] arm64: dts: broadcom: bcm4908: describe USB PHY - - - --- 2021-02-15 Rafał Miłecki New
[1/5] dt-bindings: pinctrl: support specifying pins, groups & functions pinctrl: allow storing pins, groups & functions in DT - - - --- 2021-11-18 Rafał Miłecki New
[1/5] phy: bcm-ns-usb3: always wait for idle after writing to the PHY reg - - - --- 2017-05-11 Rafał Miłecki New
[12/12] mtd: mtd: drop NAND_ECC_SOFT_BCH enum value - - - --- 2016-04-15 Rafał Miłecki New
[2/2] ARM: BCM5301X: Fix NAND ECC parameters for D-Link DIR-885L - - - --- 2016-06-06 Rafał Miłecki New
[2/2] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger - - - --- 2017-03-08 Rafał Miłecki New
[2/2] ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED - - - --- 2017-02-14 Rafał Miłecki New
[2/2] ARM: dts: BCM53573: Add Tenda AC9 switch ports [1/2] ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch - - - --- 2021-09-20 Rafał Miłecki New
[2/2] arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000 [1/2] dt-bindings: arm: Add Asus GT-AX6000 based on BCM4912 1 - - --- 2022-07-13 Rafał Miłecki New
[2/2] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files [1/2] arm64: add config for Broadcom BCM4908 SoCs - - - --- 2020-10-28 Rafał Miłecki New
[2/2] arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files [1/2] dt-bindings: arm: bcm: document Netgear R8000P binding - - - --- 2020-12-08 Rafał Miłecki New
[2/2] arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500 [1/2] dt-bindings: arm: bcm: document Netgear RAXE500 binding - - - --- 2021-11-05 Rafał Miłecki New
[2/2] dt-bindings: mfd: add Broadcom's timer MFD block [1/2] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema - - - --- 2021-10-29 Rafał Miłecki New
[2/2] dt-bindings: nvmem: cells: add MAC address cell dt-bindings: nvmem: support describing cells - - - --- 2022-01-25 Rafał Miłecki New
[2/2] leds: bcm63xxx: add support for BCM63xxx controller [1/2] dt-bindings: leds: add Broadcom's BCM63xxx controller - - - --- 2021-11-15 Rafał Miłecki New
[2/2] mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id - - - --- 2014-09-29 Rafał Miłecki New
[2/2] nvmem: add driver handling U-Boot environment variables [1/2] mtd: call of_platform_populate() for MTD partitions - - - --- 2022-04-06 Rafał Miłecki New
[2/2] nvmem: brcm_nvram: find Device Tree nodes for NVMEM cells [1/2] nvmem: core: support passing DT node in cell info - - - --- 2022-02-28 Rafał Miłecki New
[2/2] nvmem: iomap: new driver exposing NVMEM accessible using I/O mapping [1/2] dt-bindings: nvmem: add binding for I/O mapped NVMEM - - - --- 2021-03-04 Rafał Miłecki New
[2/2] PCI: brcmstb: support BCM4908 with external PERST# signal controller brcmstb: initial work on BCM4908 - - - --- 2020-11-26 Rafał Miłecki New
[2/2] PCI: iproc: Enable hooking abort handler on devices with bcma - - - --- 2016-04-09 Rafał Miłecki New
[2/2] pinctrl: bcm: add Northstar driver [1/2] dt-bindings: pinctrl: document Broadcom Northstar pin mux controller - - - --- 2018-09-19 Rafał Miłecki New
[2/3] ARM: BCM5301X: Add DT for Buffalo WXR-1900DHP - - - --- 2015-05-13 Rafał Miłecki New
[2/3] ARM: BCM5301X: Enable UART on Netgear R8000 - - - --- 2016-09-21 Rafał Miłecki New
[2/3] ARM: dts: BCM5301X: Fix MDIO mux binding [1/3] ARM: dts: BCM5301X: Fix nodes names - - - --- 2021-08-19 Rafał Miłecki New
[2/3] arm64: dts: broadcom: bcm4908: add LEDs controller block [1/3] arm64: dts: broadcom: bcm4908: add remaining LED pins - - - --- 2022-07-18 Rafał Miłecki New
[2/3] dt-bindings: nvmem: brcm, nvram: add NVMEM cell to example [1/3] dt-bindings: nvmem: make "reg" property optional - - - --- 2022-01-24 Rafał Miłecki New
[2/3] dt-bindings: phy: brcm, brcmstb-usb-phy: add BCM4908 binding [1/3] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the json-schema 1 - - --- 2020-12-16 Rafał Miłecki New
[2/3] dt-bindings: watchdog: brcm, bcm63xx-wdt: add BCM4908 compatibility [1/3] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema - - - --- 2021-10-28 Rafał Miłecki New
[2/3] leds: add help info about BCM63138 module name leds-bcm63138: post apply/review fixes - - - --- 2022-07-17 Rafał Miłecki New
[2/3] watchdog: bcm63xx_wdt: support compiling with COMPILE_TEST [1/3] dt-bindings: watchdog: add Broadcom's BCM63xx watchdog - - - --- 2021-10-27 Rafał Miłecki New
[2/4] dt-bindings: net: allow Ethernet devices as LED triggers [1/4] dt-bindings: net: add bitfield defines for Ethernet speeds - - - --- 2022-05-03 Rafał Miłecki New
[2/5] ARM: BCM5301X: Specify USB controllers in DT - - - --- 2016-12-06 Rafał Miłecki New
[2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller [1/5] arm64: dts: broadcom: bcm4908: describe USB PHY - - - --- 2021-02-15 Rafał Miłecki New
[2/5] dt-bindings: pinctrl: brcm,ns-pinmux: extend example pinctrl: allow storing pins, groups & functions in DT - - - --- 2021-11-18 Rafał Miłecki New
[2/5] phy: bcm-ns-usb3: use pointer for PHY writing function - - - --- 2017-05-11 Rafał Miłecki New
[2/9] mtd: nand: s3c2410: set ECC algorithm explicitly - - - --- 2016-04-13 Rafał Miłecki New
[3/3] ARM: BCM5301X: Add DT for SmartRG SR400ac - - - --- 2015-05-13 Rafał Miłecki New
[3/3] ARM: BCM5301X: Specify USB 3.0 PHY in DT - - - --- 2016-09-21 Rafał Miłecki New
[3/3] ARM: dts: BCM5301X: Fix memory nodes names [1/3] ARM: dts: BCM5301X: Fix nodes names - - - --- 2021-08-19 Rafał Miłecki New
[3/3] arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs [1/3] arm64: dts: broadcom: bcm4908: add remaining LED pins - - - --- 2022-07-18 Rafał Miłecki New
[3/3] leds: leds-bcm63138: get rid of LED_OFF leds-bcm63138: post apply/review fixes - - - --- 2022-07-17 Rafał Miłecki New
[3/3] nvmem: core: add cell name based matching of DT cell nodes [1/3] dt-bindings: nvmem: make "reg" property optional - - - --- 2022-01-24 Rafał Miłecki New
[3/3] phy: phy-brcm-usb: support BCM4908 binding [1/3] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the json-schema 1 - - --- 2020-12-16 Rafał Miłecki New
[3/3] watchdog: bcm63xx_wdt: support BCM4908 [1/3] dt-bindings: watchdog: add Broadcom's BCM63xx watchdog - - - --- 2021-10-27 Rafał Miłecki New
[3/3] watchdog: bcm7038_wdt: support BCM4908 SoC [1/3] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema - - - --- 2021-10-28 Rafał Miłecki New
[3/4] dt-bindings: leds: add Ethernet triggered LEDs to example [1/4] dt-bindings: net: add bitfield defines for Ethernet speeds - - - --- 2022-05-03 Rafał Miłecki New
[3/5] ARM: BCM5301X: Set GPIO enabling USB power on Netgear R7000 - - - --- 2016-12-06 Rafał Miłecki New
[3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch [1/5] arm64: dts: broadcom: bcm4908: describe USB PHY - - - --- 2021-02-15 Rafał Miłecki New
[3/5] phy: bcm-ns-usb3: enable MDIO in the platform specific code - - - --- 2017-05-11 Rafał Miłecki New
[3/5] pinctrl: add helpers reading pins, groups & functions from DT pinctrl: allow storing pins, groups & functions in DT - - - --- 2021-11-18 Rafał Miłecki New
[4.18] ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed partitions syntax - - - --- 2018-04-04 Rafał Miłecki New
[4/4] ARM: dts: BCM5301X: Add triggers for Luxul XWR-1200 network LEDs [1/4] dt-bindings: net: add bitfield defines for Ethernet speeds - - - --- 2022-05-03 Rafał Miłecki New
[4/5] ARM: BCM5301X: Specify all RAM by including extra block - - - --- 2016-12-06 Rafał Miłecki New
[4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs [1/5] arm64: dts: broadcom: bcm4908: describe USB PHY - - - --- 2021-02-15 Rafał Miłecki New
[4/5] dt-bindings: phy: Modify Broadcom NS USB 3.0 PHY binding to use MDIO - - - --- 2017-05-11 Rafał Miłecki New
[4/5] pinctrl: bcm: pinctrl-ns: supoprt DT specified pins, groups & functions pinctrl: allow storing pins, groups & functions in DT - - - --- 2021-11-18 Rafał Miłecki New
[4/8] mtd: nand: nuc900: set ECC algorithm explicitly - - - --- 2016-04-08 Rafał Miłecki New
[5/5] ARM: BCM53573: Specify USB ports of on-SoC controllers - - - --- 2016-12-06 Rafał Miłecki New
[5/5] ARM: dts: BCM5301X: add pinctrl pins, groups & functions pinctrl: allow storing pins, groups & functions in DT - - - --- 2021-11-18 Rafał Miłecki New
[5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions [1/5] arm64: dts: broadcom: bcm4908: describe USB PHY - - - --- 2021-02-15 Rafał Miłecki New
[5/5] phy: bcm-ns-usb3: add MDIO driver using proper bus layer - - - --- 2017-05-11 Rafał Miłecki New
[Broadcom/stblinux] soc: brcmstb: add stubs for getting platform IDs [Broadcom/stblinux] soc: brcmstb: add stubs for getting platform IDs - - - --- 2021-01-14 Rafał Miłecki New
[devicetree] ARM: BCM53573: Specify PMU and its ILP clock in the DT - - - --- 2016-09-17 Rafał Miłecki New
[devicetree/next] ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1 - - - --- 2016-11-13 Rafał Miłecki New
[dt,V2] ARM: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 2 - - --- 2016-12-01 Rafał Miłecki New
[dt] ARM: BCM5301X: Add DT for Netgear R8000 - - - --- 2015-02-18 Rafał Miłecki New
[dt] ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250 - - - --- 2015-02-20 Rafał Miłecki New
[dt] ARM: BCM5301X: Set vcc-gpio for USB controllers of few devices - - - --- 2016-03-23 Rafał Miłecki New
[fixes,4.20] dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon [fixes,4.20] dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon - - - --- 2018-12-18 Rafał Miłecki New
« 1 2 3 4 »