Show patches with: Submitter = Lubomir Rintel       |   294 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
dma: mv_xor: remove minimal offload length threshold - - - --- 2012-12-27 Lubomir Rintel New
[1/2] dma: mv_xor: use proper dma memory management functions - - - --- 2012-12-27 Lubomir Rintel New
[2/2] dma: mv_xor: do not sync the DMA buffer after being deallocated - - - --- 2012-12-27 Lubomir Rintel New
[1/3] dma: mv_xor: do not sync the DMA buffer after being deallocated - - - --- 2013-01-18 Lubomir Rintel New
[2/3] dma: mv_xor: fix DMA-API error handling sanity check - - - --- 2013-01-18 Lubomir Rintel New
[3/3] dma: mv_xor: get rid of a DMA-API sanity check warning - - - --- 2013-01-18 Lubomir Rintel New
bcm2835: Add Broadcom BCM2835 RNG to the device tree - - - --- 2013-03-28 Lubomir Rintel New
ARM: bcm2835: Enable USB_DWC2_HOST in bcm2835_defconfig - - - --- 2014-09-16 Lubomir Rintel New
mailbox: Enable BCM2835 mailbox support - - - --- 2014-10-24 Lubomir Rintel New
bcm2835: add VideoCore Mailbox to the device tree - - - --- 2014-10-24 Lubomir Rintel New
bcm2835: Add Raspberry Pi CPU frequency control to the device tree - - - --- 2015-10-11 Lubomir Rintel New
bcm2835: Add Raspberry Pi thermal sensor to the device tree - - - --- 2015-10-11 Lubomir Rintel New
thermal: Add Raspberry Pi BCM2835 thermal driver - - - --- 2015-10-11 Lubomir Rintel New
[v4] ARM: bcm2835: dt: Add the ethernet to the device trees - - - --- 2016-04-30 Lubomir Rintel New
[v5] ARM: bcm2835: dt: Add the ethernet to the device trees - - - --- 2016-05-02 Lubomir Rintel New
[01/14] phy: phy-pxa-usb: add a new driver Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[02/14] dt-bindings: phy-pxa-usb: add bindings Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[03/14] USB: EHCI: make ehci-mv a separate driver Convert ehci-mv to DT - - - --- 2018-08-22 Lubomir Rintel New
[04/14] ARM: mmp: add a pxa-usb-phy device Convert ehci-mv to DT - - - --- 2018-08-22 Lubomir Rintel New
[05/14] ARM: ttc_dkb: add an instance of pxa-usb-phy Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[06/14] ARM: aspenite: add an instance of pxa-usb-phy Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[07/14] USB: EHCI: ehci-mv: remove private_init Convert ehci-mv to DT - - - --- 2018-08-22 Lubomir Rintel New
[08/14] USB: EHCI: ehci-mv: use phy-pxa-usb Convert ehci-mv to DT - - - --- 2018-08-22 Lubomir Rintel New
[09/14] USB: phy-mv-usb: use phy-pxa-usb Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[10/14] USB: gadget: mv-udc: use phy-pxa-usb Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[11/14] USB: EHCI: ehci-mv: add DT support Convert ehci-mv to DT - - - --- 2018-08-22 Lubomir Rintel New
[12/14] dt-bindings: ehci-mv: add bindings Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[13/14] DT: marvell,mmp2: add OTG PHY Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[14/14] DT: marvell,mmp2: add USB OTG host controller Convert ehci-mv to DT 1 - - --- 2018-08-22 Lubomir Rintel New
[1/4] dt-bindings: mrvl,mmp-timer: add clock Enable the timer clock on DT MMP2 - - - --- 2018-09-10 Lubomir Rintel Superseded
[2/4] DT: marvell,mmp2: add clock to the timer Enable the timer clock on DT MMP2 - - - --- 2018-09-10 Lubomir Rintel Superseded
[3/4] ARM: mmp2: initialize clocks before the timer Enable the timer clock on DT MMP2 - - - --- 2018-09-10 Lubomir Rintel Superseded
[4/4] ARM: mmp/mmp2: dt: enable the clock Enable the timer clock on DT MMP2 - - - --- 2018-09-10 Lubomir Rintel Superseded
[1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller Make SPI work on DT MMP2 - 1 - --- 2018-09-10 Lubomir Rintel Superseded
[2/5] PCI: provide pci_match_id() with CONFIG_PCI=n Make SPI work on DT MMP2 1 - - --- 2018-09-10 Lubomir Rintel Superseded
[3/5] spi: pxa2xx: use an enum for type Make SPI work on DT MMP2 - - - --- 2018-09-10 Lubomir Rintel Superseded
[4/5] spi: pxa2xx: add devicetree support Make SPI work on DT MMP2 - - - --- 2018-09-10 Lubomir Rintel Superseded
[5/5] DT: marvell,mmp2: add SSP1 and SSP3 Make SPI work on DT MMP2 - - - --- 2018-09-10 Lubomir Rintel Superseded
DT: marvell,mmp2: add MMC controllers DT: marvell,mmp2: add MMC controllers - - - --- 2018-09-10 Lubomir Rintel New
[v2] DT: marvell,mmp2: add MMC controllers [v2] DT: marvell,mmp2: add MMC controllers 1 - - --- 2018-09-17 Lubomir Rintel New
ARM: multi_v7_defconfig: enable MMP2 platform ARM: multi_v7_defconfig: enable MMP2 platform - - - --- 2018-09-17 Lubomir Rintel New
DT: marvell,mmp2: give gpio node a name DT: marvell,mmp2: give gpio node a name 1 - - --- 2018-09-17 Lubomir Rintel New
[v2,1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller Make SPI work on DT MMP2 - 1 - --- 2018-09-17 Lubomir Rintel New
[v2,2/5] PCI: Provide pci_match_id() with CONFIG_PCI=n Make SPI work on DT MMP2 1 - - --- 2018-09-17 Lubomir Rintel New
[v2,3/5] spi: pxa2xx: Use an enum for type Make SPI work on DT MMP2 - - - --- 2018-09-17 Lubomir Rintel New
[v2,4/5] spi: pxa2xx: Add devicetree support Make SPI work on DT MMP2 - - - --- 2018-09-17 Lubomir Rintel New
[v2,5/5] DT: marvell,mmp2: Add SSP1 and SSP3 Make SPI work on DT MMP2 - - - --- 2018-09-17 Lubomir Rintel New
[1/2] DT: marvell,mmp2: fix TWSI2 Fix TWSI on MMC2 1 - - --- 2018-09-17 Lubomir Rintel New
[2/2] DT: marvell,mmp2: add more TWSI controllers Fix TWSI on MMC2 1 - - --- 2018-09-17 Lubomir Rintel New
[v2,1/4] dt-bindings: mrvl,mmp-timer: add clock Enable the timer clock on DT MMP2 1 1 - --- 2018-09-18 Lubomir Rintel New
[v2,2/4] DT: marvell,mmp2: add clock to the timer Enable the timer clock on DT MMP2 1 - - --- 2018-09-18 Lubomir Rintel New
[v2,3/4] ARM: mmp2: initialize clocks before the timer Enable the timer clock on DT MMP2 1 - - --- 2018-09-18 Lubomir Rintel New
[4/4] ARM: mmp/mmp2: dt: enable the clock Enable the timer clock on DT MMP2 1 - - --- 2018-09-18 Lubomir Rintel New
DT: marvell,mmp2: fix the gpio interrupt cell number DT: marvell,mmp2: fix the gpio interrupt cell number 1 - - --- 2018-10-08 Lubomir Rintel New
[v2,01/11] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller spi: pxa2xx: add DT and slave mode support 1 1 - --- 2018-10-10 Lubomir Rintel New
[v2,02/11] PCI: Provide pci_match_id() with CONFIG_PCI=n spi: pxa2xx: add DT and slave mode support 2 - - --- 2018-10-10 Lubomir Rintel New
[03/11] spi: pxa2xx: Use an enum for type spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[04/11] spi: pxa2xx: Add devicetree support spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[05/11] DT: marvell,mmp2: Add SSP1 and SSP3 spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[06/11] dt-bindings: spi/spi-pxa2xx: Add spi-slave property spi: pxa2xx: add DT and slave mode support 1 1 - --- 2018-10-10 Lubomir Rintel New
[07/11] spi: Deal with slaves that return from transfer_one() unfinished spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[08/11] spi: pxa2xx: Add slave mode support spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[09/11] dt-bindings: spi/spi-pxa2xx: Add ready GPIO signal spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[10/11] spi: pxa2xx: Add ready signal spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[11/11] spi: pxa2xx: Deal with the leftover garbage in TXFIFO spi: pxa2xx: add DT and slave mode support 1 - - --- 2018-10-10 Lubomir Rintel New
[01/15] power: supply: olpc_battery: correct the temperature units Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[02/15] Revert "platform/olpc: Make ec explicitly non-modular" Add support for OLPC XO 1.75 Embedded Controller - - - --- 2018-10-10 Lubomir Rintel Superseded
[03/15] dt-bindings: olpc, xo1.75-ec: Add OLPC XO-1.75 EC bindings Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[04/15] Platform: OLPC: Remove an unused include Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[05/15] Platform: OLPC: Move OLPC config symbol out of x86 tree Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[06/15] Platform: OLPC: Add XO-1.75 EC driver Add support for OLPC XO 1.75 Embedded Controller - - - --- 2018-10-10 Lubomir Rintel Superseded
[07/15] Platform: OLPC: Avoid a warning if the EC didn't register yet Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[08/15] Platform: OLPC: Move EC-specific functionality out from x86 Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[09/15] Platform: OLPC: add a regulator for the DCON Add support for OLPC XO 1.75 Embedded Controller - - - --- 2018-10-10 Lubomir Rintel Superseded
[10/15] dt-bindings: olpc_battery: Add XO-1.5 battery Add support for OLPC XO 1.75 Embedded Controller 1 1 - --- 2018-10-10 Lubomir Rintel Superseded
[11/15] x86, olpc: Use a correct version when making up a battery node Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[12/15] power: supply: olpc_battery: Use DT to get battery version Add support for OLPC XO 1.75 Embedded Controller 1 1 - --- 2018-10-10 Lubomir Rintel Superseded
[13/15] power: supply: olpc_battery: Move priv data to a struct Add support for OLPC XO 1.75 Embedded Controller - 1 - --- 2018-10-10 Lubomir Rintel Superseded
[14/15] power: supply: olpc_battery: Avoid using platform_info Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[15/15] power: supply: olpc_battery: Add OLPC XO 1.75 support Add support for OLPC XO 1.75 Embedded Controller 1 - - --- 2018-10-10 Lubomir Rintel Superseded
[v3,01/18] dt-bindings: mrvl,mmp-timer: add clock MMP platform fixes 1 1 - --- 2018-11-12 Lubomir Rintel New
[v3,02/18] DT: marvell, mmp2: fix the gpio interrupt cell number MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,03/18] DT: marvell,mmp2: give gpio node a name MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,04/18] DT: marvell,mmp2: add clock to the timer MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,05/18] DT: marvell,mmp2: add MMC controllers MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,06/18] DT: marvell,mmp2: fix TWSI2 MMP platform fixes - - 1 --- 2018-11-12 Lubomir Rintel New
[v3,07/18] DT: marvell,mmp2: add more TWSI controllers MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,08/18] DT: marvell,mmp2: add OTG PHY MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,09/18] DT: marvell,mmp2: add USB OTG host controller MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,10/18] irqchip/mmp: only touch the PJ4 & FIQ bits on enable/disable MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,11/18] gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2 MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,12/18] ARM: mmp/mmp2: use cpu_is_pj4() instead of cpu_is_mmp2() MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,13/18] ARM: mmp2: initialize clocks before the timer MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,14/18] ARM: mmp/mmp2: dt: enable the clock MMP platform fixes 1 - - --- 2018-11-12 Lubomir Rintel New
[v3,15/18] ARM: mmp: add a pxa-usb-phy device MMP platform fixes - - - --- 2018-11-12 Lubomir Rintel New
[v3,16/18] ARM: mmp: add an instance of pxa-usb-phy to ttc_dkb and aspenite MMP platform fixes - - - --- 2018-11-12 Lubomir Rintel New
[v3,17/18] USB: phy-mv-usb: use phy-pxa-usb MMP platform fixes - - 1 --- 2018-11-12 Lubomir Rintel New
[v3,18/18] USB: gadget: mv-udc: use phy-pxa-usb MMP platform fixes - - - --- 2018-11-12 Lubomir Rintel New
[v3,1/6] spi: pxa2xx: dt-bindings: Add spi-slave property spi: pxa2xx: add slave mode support 1 2 - --- 2018-11-13 Lubomir Rintel New
[v3,2/6] spi: Deal with slaves that return from transfer_one() unfinished spi: pxa2xx: add slave mode support 1 1 - --- 2018-11-13 Lubomir Rintel New
« 1 2 3 »