| Message ID | 001a01cf5b0c$5ddc7d60$19957820$%jun@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Seungwon Jeon wrote: > + Javi Merino and Tushar Behera > This change is similar to commit 3da355c(ARM: dts: Disable MDMA1 node > for arndale-octa board). If MDMA1 region is configured with secure mode, > it makes the boot failure with the following. > > Unhandled fault: imprecise external abort (0x1406) at 0x00000000 > If so, how about adding the 'disabled' status in 5420 dtsi file? Then if 'enabling' is required, we can enable in each board dt file... - Kukjin > Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> > --- > arch/arm/boot/dts/exynos5420-smdk5420.dts | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts > b/arch/arm/boot/dts/exynos5420-smdk5420.dts > index 6910485..9a48e3f 100644 > --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > @@ -373,4 +373,10 @@ > }; > }; > }; > + > + amba { > + mdma1: mdma@11C10000 { > + status = "disabled"; > + }; > + }; > }; > -- > 1.7.0.4
On 22 April 2014 07:48, Kukjin Kim <kgene.kim@samsung.com> wrote: > Seungwon Jeon wrote: >> > > + Javi Merino and Tushar Behera > >> This change is similar to commit 3da355c(ARM: dts: Disable MDMA1 node >> for arndale-octa board). If MDMA1 region is configured with secure mode, >> it makes the boot failure with the following. >> >> Unhandled fault: imprecise external abort (0x1406) at 0x00000000 >> > If so, how about adding the 'disabled' status in 5420 dtsi file? Then if 'enabling' is required, we can enable in each board dt file... > That should be okay. While at it, we can remove the node disabling code from Arndale-Octa board DTS file. > - Kukjin > >> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> >> --- >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 6 ++++++ >> 1 files changed, 6 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> index 6910485..9a48e3f 100644 >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> @@ -373,4 +373,10 @@ >> }; >> }; >> }; >> + >> + amba { >> + mdma1: mdma@11C10000 { >> + status = "disabled"; >> + }; >> + }; >> }; >> -- >> 1.7.0.4 >
On Tue, April 22, 2014, Tushar Behera wrote: > On 22 April 2014 07:48, Kukjin Kim <kgene.kim@samsung.com> wrote: > > Seungwon Jeon wrote: > >> > > > > + Javi Merino and Tushar Behera > > > >> This change is similar to commit 3da355c(ARM: dts: Disable MDMA1 node > >> for arndale-octa board). If MDMA1 region is configured with secure mode, > >> it makes the boot failure with the following. > >> > >> Unhandled fault: imprecise external abort (0x1406) at 0x00000000 > >> > > If so, how about adding the 'disabled' status in 5420 dtsi file? Then if 'enabling' is required, we > can enable in each board dt file... > > > > That should be okay. While at it, we can remove the node disabling > code from Arndale-Octa board DTS file. OK, I'll consider both. Thanks, Seungwon Jeon > > > > - Kukjin > > > >> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> > >> --- > >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 6 ++++++ > >> 1 files changed, 6 insertions(+), 0 deletions(-) > >> > >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> b/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> index 6910485..9a48e3f 100644 > >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> @@ -373,4 +373,10 @@ > >> }; > >> }; > >> }; > >> + > >> + amba { > >> + mdma1: mdma@11C10000 { > >> + status = "disabled"; > >> + }; > >> + }; > >> }; > >> -- > >> 1.7.0.4 > > > > > > -- > Tushar Behera
On 22 April 2014 12:31, Seungwon Jeon <tgih.jun@samsung.com> wrote: > On Tue, April 22, 2014, Tushar Behera wrote: >> On 22 April 2014 07:48, Kukjin Kim <kgene.kim@samsung.com> wrote: >> > Seungwon Jeon wrote: >> >> >> > >> > + Javi Merino and Tushar Behera >> > >> >> This change is similar to commit 3da355c(ARM: dts: Disable MDMA1 node >> >> for arndale-octa board). If MDMA1 region is configured with secure mode, >> >> it makes the boot failure with the following. >> >> >> >> Unhandled fault: imprecise external abort (0x1406) at 0x00000000 >> >> >> > If so, how about adding the 'disabled' status in 5420 dtsi file? Then if 'enabling' is required, we >> can enable in each board dt file... >> > >> >> That should be okay. While at it, we can remove the node disabling >> code from Arndale-Octa board DTS file. > > OK, I'll consider both. > Seungwon, Please move the comments for MDMA1 from Arndale-Octa dts file too. Thanks.
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 6910485..9a48e3f 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -373,4 +373,10 @@ }; }; }; + + amba { + mdma1: mdma@11C10000 { + status = "disabled"; + }; + }; };
This change is similar to commit 3da355c(ARM: dts: Disable MDMA1 node for arndale-octa board). If MDMA1 region is configured with secure mode, it makes the boot failure with the following. Unhandled fault: imprecise external abort (0x1406) at 0x00000000 Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> --- arch/arm/boot/dts/exynos5420-smdk5420.dts | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)