| Message ID | 017801cde453$77b03eb0$6710bc10$@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Dec 27, 2012 at 5:58 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > And I think, would be clear if the config could be changed like following. > > 8<---------------------------------------------------------------------- > From: Kukjin Kim <kgene.kim@samsung.com> > Subject: [PATCH] pinctrl: exynos: change PINCTRL_EXYNOS option > > Since pinctrl-exynos can support exynos4 and exynos5 so changed > the option name to PINCTRL_EXYNOS for more clarity. > > Cc: Thomas Abraham <Thomas.abraham@linaro.org> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Grant Likely <grant.likely@secretlab.ca> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Shall I take this into the pinctrl tree? Yours, Linus Walleij
Linus Walleij wrote: > > On Thu, Dec 27, 2012 at 5:58 PM, Kukjin Kim <kgene.kim@samsung.com> > wrote: > > > And I think, would be clear if the config could be changed like following. > > > > 8<---------------------------------------------------------------------- > > From: Kukjin Kim <kgene.kim@samsung.com> > > Subject: [PATCH] pinctrl: exynos: change PINCTRL_EXYNOS option > > > > Since pinctrl-exynos can support exynos4 and exynos5 so changed > > the option name to PINCTRL_EXYNOS for more clarity. > > > > Cc: Thomas Abraham <Thomas.abraham@linaro.org> > > Cc: Linus Walleij <linus.walleij@linaro.org> > > Cc: Grant Likely <grant.likely@secretlab.ca> > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > Acked-by: Linus Walleij <linus.walleij@linaro.org> > > Shall I take this into the pinctrl tree? > Yes, please :-) Just note, regarding Samsung pinctrl changes in the following: git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git next/pinctrl-exynos Thanks. - Kukjin
On Thu, Jan 10, 2013 at 2:29 AM, Kukjin Kim <kgene.kim@samsung.com> wrote: > Linus Walleij wrote: >> On Thu, Dec 27, 2012 at 5:58 PM, Kukjin Kim <kgene.kim@samsung.com> >> wrote: >> >> > And I think, would be clear if the config could be changed like > following. >> > >> > 8<---------------------------------------------------------------------- >> > From: Kukjin Kim <kgene.kim@samsung.com> >> > Subject: [PATCH] pinctrl: exynos: change PINCTRL_EXYNOS option >> > >> > Since pinctrl-exynos can support exynos4 and exynos5 so changed >> > the option name to PINCTRL_EXYNOS for more clarity. >> > >> > Cc: Thomas Abraham <Thomas.abraham@linaro.org> >> > Cc: Linus Walleij <linus.walleij@linaro.org> >> > Cc: Grant Likely <grant.likely@secretlab.ca> >> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> >> >> Acked-by: Linus Walleij <linus.walleij@linaro.org> >> >> Shall I take this into the pinctrl tree? >> > Yes, please :-) OK I did. > Just note, regarding Samsung pinctrl changes in the following: > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git > next/pinctrl-exynos Hm. I had to use patch -p1 < ... to apply the patch, which indicates there may be merge clashes. Anyway, it's merged now. Yours, Linus Walleij
On 27 December 2012 22:28, Kukjin Kim <kgene.kim@samsung.com> wrote: > Thomas Abraham wrote: >> >> Hi Linus, >> >> On 14 December 2012 21:21, Linus Walleij <linus.walleij@linaro.org> wrote: >> > On Thu, Dec 13, 2012 at 12:54 PM, Thomas Abraham >> > <thomas.abraham@linaro.org> wrote: >> > >> >> Add Samsung Exynos5250 SoC specific data to enable pinctrl support for >> >> all platforms based on Exynos5250. >> >> >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> > >> > Acked-by: Linus Walleij <linus.walleij@linaro.org> >> > >> > For this series, I guess you'll fix it through the Samsung tree? >> >> Thanks for your ack. Since there are patches to be prepared for >> migrating the rest of Exynos5250 related code to the pinctrl >> framework, it would be easier if this series goes through the Samsung >> tree. >> > I applied this series, thanks. This series has not made it into 3.9-rc1. So I will rebase this series to 3.9-rc1 and post again. Thanks, Thomas. > > And I think, would be clear if the config could be changed like following. > > 8<---------------------------------------------------------------------- > From: Kukjin Kim <kgene.kim@samsung.com> > Subject: [PATCH] pinctrl: exynos: change PINCTRL_EXYNOS option > > Since pinctrl-exynos can support exynos4 and exynos5 so changed > the option name to PINCTRL_EXYNOS for more clarity. > > Cc: Thomas Abraham <Thomas.abraham@linaro.org> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Grant Likely <grant.likely@secretlab.ca> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 91d5b6f..e1f63e7 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -412,7 +412,7 @@ config MACH_EXYNOS4_DT > select CPU_EXYNOS4210 > select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD > select PINCTRL > - select PINCTRL_EXYNOS4 > + select PINCTRL_EXYNOS > select USE_OF > help > Machine support for Samsung Exynos4 machine with device tree > enabled. > diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig > index c31aeb0..f59feab 100644 > --- a/drivers/pinctrl/Kconfig > +++ b/drivers/pinctrl/Kconfig > @@ -185,8 +185,8 @@ config PINCTRL_SAMSUNG > select PINMUX > select PINCONF > > -config PINCTRL_EXYNOS4 > - bool "Pinctrl driver data for Exynos4 SoC" > +config PINCTRL_EXYNOS > + bool "Pinctrl driver data for Samsung EXYNOS SoCs" > depends on OF && GPIOLIB > select PINCTRL_SAMSUNG > > diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile > index fc4606f..6e87e52 100644 > --- a/drivers/pinctrl/Makefile > +++ b/drivers/pinctrl/Makefile > @@ -36,7 +36,7 @@ obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o > obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o > obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o > obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o > -obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o > +obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o > obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o > obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o > obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o > 8<---------------------------------------------------------------------- > > - Kukjin >
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 91d5b6f..e1f63e7 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -412,7 +412,7 @@ config MACH_EXYNOS4_DT select CPU_EXYNOS4210 select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD select PINCTRL - select PINCTRL_EXYNOS4 + select PINCTRL_EXYNOS select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index c31aeb0..f59feab 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -185,8 +185,8 @@ config PINCTRL_SAMSUNG select PINMUX select PINCONF -config PINCTRL_EXYNOS4 - bool "Pinctrl driver data for Exynos4 SoC" +config PINCTRL_EXYNOS + bool "Pinctrl driver data for Samsung EXYNOS SoCs" depends on OF && GPIOLIB select PINCTRL_SAMSUNG diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index fc4606f..6e87e52 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -36,7 +36,7 @@ obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o -obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o +obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o