@@ -323,6 +323,14 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spic0_pins>;
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
#include <dt-bindings/thermal/thermal.h>
@@ -616,6 +617,45 @@
};
};
+ sata: sata@1a200000 {
+ compatible = "mediatek,mt7622-ahci",
+ "mediatek,mtk-ahci";
+ reg = <0 0x1a200000 0 0x1100>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hostc";
+ clocks = <&pciesys CLK_SATA_AHB_EN>,
+ <&pciesys CLK_SATA_AXI_EN>,
+ <&pciesys CLK_SATA_ASIC_EN>,
+ <&pciesys CLK_SATA_RBC_EN>,
+ <&pciesys CLK_SATA_PM_EN>;
+ clock-names = "ahb", "axi", "asic", "rbc", "pm";
+ phys = <&sata_port PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+ <&pciesys MT7622_SATA_PHY_SW_RST>,
+ <&pciesys MT7622_SATA_PHY_REG_RST>;
+ reset-names = "axi", "sw", "reg";
+ mediatek,phy-mode = <&pciesys>;
+ status = "disabled";
+ };
+
+ sata_phy: sata-phy@1a243000 {
+ compatible = "mediatek,generic-tphy-v1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ sata_port: sata-phy@1a243000 {
+ reg = <0 0x1a243000 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_ETH_500M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";