From patchwork Tue Nov 18 23:02:53 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arnaud Ebalard X-Patchwork-Id: 5333651 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 7258B9F2ED for ; Tue, 18 Nov 2014 23:05:32 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 47288201D3 for ; Tue, 18 Nov 2014 23:05:31 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 0EEE2201CE for ; Tue, 18 Nov 2014 23:05:30 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Xqrnh-0005ri-Cp; Tue, 18 Nov 2014 23:03:09 +0000 Received: from 36.223.133.77.rev.sfr.net ([77.133.223.36] helo=smtp.natisbad.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1XqrnY-0005Rj-BS for linux-arm-kernel@lists.infradead.org; Tue, 18 Nov 2014 23:03:01 +0000 Received: by smtp.natisbad.org (Postfix, from userid 109) id 673BB1700D44; Wed, 19 Nov 2014 00:02:16 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=natisbad.org; s=mail; t=1416351736; bh=1+GnljjT1ovs1UJGSNb7Kihwo4mo6XUIU5Yru+N0IK0=; h=From:To:Cc:Subject:In-Reply-To:References:Date:From; b=HKewOAP5dtWoHAL89hMASvTo6HOnCamHpj+QcOugH25c6Y0lUkiWd8NzqERv8olOt iZZBGixSX9Eve7FalVQXGQxgxT/q4nlWUu6YR1rCBk7mW2DjOkbkMJoCDalzAqLfNU 1eQbCxlTgJlwPnYREfiyb1Eyu1VK8Kk6rrB+tIeg= X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-2.5 required=5.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_LOW, T_DKIM_INVALID, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from small (localhost [IPv6:::1]) by smtp.natisbad.org (Postfix) with ESMTP id 25BAE1700D0D; Tue, 18 Nov 2014 23:59:31 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=natisbad.org; s=mail; t=1416351571; bh=1+GnljjT1ovs1UJGSNb7Kihwo4mo6XUIU5Yru+N0IK0=; h=From:To:Cc:Subject:In-Reply-To:References:Date:From; b=ZdN2YuO3Rh5Ztag+tMUkzj76y4bYGTuTxJB3UDt9uZjUz3Fbqjy8IIh5wBGVZvuRa FLhtkjA2a2DgBYMHMaTYWJSbLmH4sdrCiFGILTa6dIdU4lJbp5zk71ceTBXgJoq4Ed Vq57LZLjFwYKgkS0s6mpeRN2t5P6fbxR/T65rcB0= X-Hashcash: 1:20:141118:jason@lakedaemon.net::aHEZFc4f6sScikUG:0000000000000000000000000000000000000000041pK X-Hashcash: 1:20:141118:andrew@lunn.ch::UKSzW7dXnMDzCeln:00066dV X-Hashcash: 1:20:141118:gregory.clement@free-electrons.com::LYSNBTKPwvvsLAJQ:0000000000000000000000000000n6i X-Hashcash: 1:20:141118:sebastian.hesselbarth@gmail.com::+HTbvvo3s18fwTJO:0000000000000000000000000000004pxL X-Hashcash: 1:20:141118:klightspeed@killerwolves.net::EPtw038dO99xKa8l:0000000000000000000000000000000007V7k X-Hashcash: 1:20:141118:linux@arm.linux.org.uk::VUwG0lqqXbnCzpH/:0000000000000000000000000000000000000001PcI X-Hashcash: 1:20:141118:linux-arm-kernel@lists.infradead.org::f8VwEwHXS/5msA2l:000000000000000000000000013RU X-Hashcash: 1:20:141118:rob.herring@calxeda.com::/XnF1FHI9KmnkPMY:000000000000000000000000000000000000000TFO X-Hashcash: 1:20:141118:pawel.moll@arm.com::9yv9PVuMCGDCpOYq:00000000000000000000000000000000000000000006EqN X-Hashcash: 1:20:141118:mark.rutland@arm.com::AZiOj/bplq9SbRJO:00000000000000000000000000000000000000000KS2H X-Hashcash: 1:20:141118:swarren@wwwdotorg.org::O7Yeyn0yJtiOWXnF:00000000000000000000000000000000000000000KqD X-Hashcash: 1:20:141118:ijc+devicetree@hellion.org.uk::9pE8Nr5EeorJWNC0:000000000000000000000000000000001Q4g X-Hashcash: 1:20:141118:devicetree@vger.kernel.org::G93VXadNgw1kW0kr:000000000000000000000000000000000003vsC From: Arnaud Ebalard To: Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Ben Peddell Subject: [PATCHv4 09/10] arm: mvebu: add .dts file for Synology DS213j In-Reply-To: References: Message-Id: <0b9e42c66dcc191168c6868cb74b2817e228fc8d.1416351426.git.arno@natisbad.org> Date: Wed, 19 Nov 2014 00:02:53 +0100 User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/24.3 (gnu/linux) MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20141118_150300_732917_6798720C X-CRM114-Status: GOOD ( 22.03 ) X-Spam-Score: 0.3 (/) Cc: Mark Rutland , devicetree@vger.kernel.org, Russell King , Pawel Moll , Stephen Warren , Ian Campbell , Rob Herring , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Synology DS213j is a 2-bay NAS powered by a Marvell Armada 370 (88F6710 @1.2Ghz). It is very similar on many aspects to previous 2-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 512MB RAM - boot on SPI flash (64Mbit Micron N25Q064) - 1 GbE interface (Armada MAC connected to a Marvell 88E1512 PHY via SGMII) - 2 rear USB 2.0 ports (directly handled by the Armada 370) - 2 internal SATA ports handled by the Armada 370: 2 GPIO for presence, 2 for powering them - two front amber LED (disk1, disk2) controlled by the SoC - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a TI MSP430F2111) - Fan handled via 4 GPIO (3 for speed, 1 for alarm) Signed-off-by: Arnaud Ebalard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/armada-370-synology-ds213j.dts | 321 +++++++++++++++++++++++ 2 files changed, 323 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/armada-370-synology-ds213j.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 31529ccc67a0..cfcf400a3a6c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -496,7 +496,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ armada-370-netgear-rn104.dtb \ - armada-370-rd.dtb + armada-370-rd.dtb \ + armada-370-synology-ds213j.dtb dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts new file mode 100644 index 000000000000..6922f13135d2 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -0,0 +1,321 @@ +/* + * Device Tree file for Synology DS213j + * + * Copyright (C) 2014, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the old 0xd0000000). + * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot + * bootloaders provided by Marvell. It is used in recent versions of + * DSM software provided by Synology. Nonetheless, some earlier boards + * were delivered with an older version of u-boot that left internal + * registers mapped at 0xd0000000. If you have such a device you will + * not be able to directly boot a kernel based on this Device Tree. In + * that case, the preferred solution is to update your bootloader (e.g. + * by upgrading to latest version of DSM, or building a new one and + * installing it from u-boot prompt) or adjust the Devive Tree + * (s/0xf1000000/0xd0000000/ in 'ranges' below). + */ + +/dts-v1/; + +#include +#include +#include "armada-370.dtsi" + +/ { + model = "Synology DS213j"; + compatible = "synology,ds213j", "marvell,armada370", + "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + + internal-regs { + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000c0000>; /* 768KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000c0000 0x002d0000>; /* 2880KB */ + }; + + partition@00390000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x00390000 0x00440000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; + }; + + /* rear USB port, near reset button */ + usb@50000 { + status = "okay"; + }; + + /* rear USB port, near RJ45 port */ + usb@51000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; + + /* Main device RTC chip */ + s35390a: s35390a@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + }; + + /* RTC provided by Seiko S-35390A above */ + rtc@10300 { + status = "disabled"; + }; + + /* Connected to a header on device's PCB */ + serial@12000 { + status = "okay"; + }; + + /* Connected to a TI MSP430F2111 for power control */ + serial@12100 { + status = "okay"; + }; + + poweroff@12100 { + compatible = "synology,power-off"; + reg = <0x12100 0x100>; + clocks = <&coreclk 0>; + }; + }; + }; + + gpio-fan-32-38 { + status = "okay"; + compatible = "gpio-fan"; + pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin + &fan_ctrl_high_pin &fan_alarm_pin>; + pinctrl-names = "default"; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH + &gpio2 0 GPIO_ACTIVE_HIGH + &gpio2 1 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 1000 1 + 1150 2 + 1350 4 + 1500 3 + 1650 5 + 1750 6 + 1900 7 >; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&disk1_led_pin + &disk2_led_pin>; + pinctrl-names = "default"; + + disk1-led-amber { + label = "synology:amber:disk1"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + disk2-led-amber { + label = "synology:amber:disk2"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>; + pinctrl-names = "default"; + + sata1_regulator: sata1-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + sata2_regulator: sata2-regulator { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA2 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + disk1_led_pin: disk1-led-pin { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + disk2_led_pin: disk2-led-pin { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + sata1_pwr_pin: sata1-pwr-pin { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + sata2_pwr_pin: sata2-pwr-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + sata1_pres_pin: sata1-pres-pin { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; + + sata2_pres_pin: sata2-pres-pin { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + syno_id_bit0_pin: syno-id-bit0-pin { + marvell,pins = "mpp55"; + marvell,function = "gpio"; + }; + + syno_id_bit1_pin: syno-id-bit1-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + + syno_id_bit2_pin: syno-id-bit2-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; + + syno_id_bit3_pin: syno-id-bit3-pin { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + + fan_ctrl_low_pin: fan-ctrl-low-pin { + marvell,pins = "mpp65"; + marvell,function = "gpio"; + }; + + fan_ctrl_mid_pin: fan-ctrl-mid-pin { + marvell,pins = "mpp64"; + marvell,function = "gpio"; + }; + + fan_ctrl_high_pin: fan-ctrl-high-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + fan_alarm_pin: fan-alarm-pin { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + poweroff_pin: poweroff-pin { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; +};