@@ -110,17 +110,6 @@ config CPU_S3C2443
# common code
-config S3C2410_CLOCK
- bool
- help
- Clock code for the S3C2410, and similar processors which
- is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
- bool
- help
- Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
config S3C24XX_SMDK
bool
help
@@ -44,10 +44,8 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o
# common code
-obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
obj-$(CONFIG_S3C24XX_DMA) += dma.o
-obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
deleted file mode 100644
@@ -1,195 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
- unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (enable)
- dclkcon |= clk->ctrlbit;
- else
- dclkcon &= ~clk->ctrlbit;
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
- return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long dclkcon;
- unsigned int uclk;
-
- if (parent == &clk_upll)
- uclk = 1;
- else if (parent == &clk_p)
- uclk = 0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
- } else {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
- }
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
- return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
- unsigned long div;
-
- if ((rate == 0) || !clk->parent)
- return 0;
-
- div = clk_get_rate(clk->parent) / rate;
- if (div < 2)
- div = 2;
- else if (div > 16)
- div = 16;
-
- return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long div = s3c24xx_calc_div(clk, rate);
-
- if (div == 0)
- return 0;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
- if (div == 0)
- return -EINVAL;
-
- if (clk == &s3c24xx_dclk0) {
- mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
- S3C2410_DCLKCON_DCLK0_CMP_MASK;
- data = S3C2410_DCLKCON_DCLK0_DIV(div) |
- S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
- } else if (clk == &s3c24xx_dclk1) {
- mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
- S3C2410_DCLKCON_DCLK1_CMP_MASK;
- data = S3C2410_DCLKCON_DCLK1_DIV(div) |
- S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
- } else
- return -EINVAL;
-
- clk->rate = clk_get_rate(clk->parent) / div;
- __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
- S3C24XX_DCLKCON);
- return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long mask;
- unsigned long source;
-
- /* calculate the MISCCR setting for the clock */
-
- if (parent == &clk_mpll)
- source = S3C2410_MISCCR_CLK0_MPLL;
- else if (parent == &clk_upll)
- source = S3C2410_MISCCR_CLK0_UPLL;
- else if (parent == &clk_f)
- source = S3C2410_MISCCR_CLK0_FCLK;
- else if (parent == &clk_h)
- source = S3C2410_MISCCR_CLK0_HCLK;
- else if (parent == &clk_p)
- source = S3C2410_MISCCR_CLK0_PCLK;
- else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- if (clk == &s3c24xx_clkout0)
- mask = S3C2410_MISCCR_CLK0_MASK;
- else {
- source <<= 4;
- mask = S3C2410_MISCCR_CLK1_MASK;
- }
-
- s3c2410_modify_misccr(mask, source);
- return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
- .name = "dclk0",
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .ops = &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
- .name = "dclk1",
- .ctrlbit = S3C2410_DCLKCON_DCLK1EN,
- .enable = s3c24xx_dclk_enable,
- .ops = &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
- .name = "clkout0",
- .ops = &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
- .name = "clkout1",
- .ops = &clkout_ops,
-};
deleted file mode 100644
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2410_CLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- /* ensure none of the special function bits set */
- clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
- __raw_writel(clkcon, S3C2410_CLKCON);
-
- return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long orig = clkslow;
-
- if (enable)
- clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
- else
- clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
- __raw_writel(clkslow, S3C2410_CLKSLOW);
-
- /* if we started the UPLL, then allow to settle */
-
- if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
- udelay(200);
-
- return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
- {
- .name = "nand",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_NAND,
- }, {
- .name = "sdi",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SDI,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_ADC,
- }, {
- .name = "i2c",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIC,
- }, {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIS,
- }, {
- .name = "spi",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SPI,
- }
-};
-
-static struct clk clk_lcd = {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
- .name = "uart",
- .devname = "s3c2410-uart.0",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
- .name = "uart",
- .devname = "s3c2410-uart.1",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
- .name = "uart",
- .devname = "s3c2410-uart.2",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0,
-};
-
-static struct clk clk_usb_bus_host = {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
- .name = "usb-bus-gadget",
- .parent = &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
- &clk_lcd,
- &clk_gpio,
- &clk_usb_host,
- &clk_usb_device,
- &clk_timers,
- &s3c24xx_clk_uart0,
- &s3c24xx_clk_uart1,
- &s3c24xx_clk_uart2,
- &clk_rtc,
- &clk_watchdog,
- &clk_usb_bus_host,
- &clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- struct clk *xtal;
- int ret;
- int ptr;
-
- clk_upll.enable = s3c2410_upll_enable;
-
- if (s3c24xx_register_clock(&clk_usb_bus) < 0)
- printk(KERN_ERR "failed to register usb bus clock\n");
-
- /* register clocks from clock array */
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
- struct clk *clkp = init_clocks[ptr];
-
- /* ensure that we note the clock state */
-
- clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsystems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- /* show the clock-slow value */
-
- xtal = clk_get(NULL, "xtal");
-
- printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
- print_mhz(clk_get_rate(xtal) /
- ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
- (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
- (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
- (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
- return 0;
-}
deleted file mode 100644
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div = (parent_rate / rate) / 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2440_camif_upll_round(clk, rate);
-
- camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
- if (rate != parent_rate) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
- return parent_rate;
-
- camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
- return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
- .name = "camif",
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
- .name = "camif-upll",
- .ops = &(struct clk_ops) {
- .set_rate = s3c2440_camif_upll_setrate,
- .get_rate = s3c2440_camif_upll_getrate,
- .round_rate = s3c2440_camif_upll_round,
- },
-};
-
-static struct clk s3c2440_clk_ac97 = {
- .name = "ac97",
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0 (S3C_VA_UART)
-#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 )
-
-static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
-{
- unsigned long ucon0, ucon1, ucon2, divisor;
-
- /* the fun of calculating the uart divisors on the s3c2440 */
- ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
- ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
- ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
- ucon0 &= S3C2440_UCON0_DIVMASK;
- ucon1 &= S3C2440_UCON1_DIVMASK;
- ucon2 &= S3C2440_UCON2_DIVMASK;
-
- if (ucon0 != 0)
- divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
- else if (ucon1 != 0)
- divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
- else if (ucon2 != 0)
- divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
- else
- /* manual calims 44, seems to be 9 */
- divisor = 9;
-
- return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
- .name = "fclk_n",
- .parent = &clk_f,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2440_fclk_n_getrate,
- },
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
- CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
- CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
- CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
- CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2440_clk_cam.parent = clock_h;
- s3c2440_clk_ac97.parent = clock_p;
- s3c2440_clk_cam_upll.parent = clock_upll;
- s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
- s3c24xx_register_clock(&s3c2440_clk_ac97);
- s3c24xx_register_clock(&s3c2440_clk_cam);
- s3c24xx_register_clock(&s3c2440_clk_cam_upll);
- clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
- clk_disable(&s3c2440_clk_ac97);
- clk_disable(&s3c2440_clk_cam);
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
- .name = "s3c2440_clk",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
- return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
deleted file mode 100644
@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
- unsigned long camdivn;
- unsigned long dvs;
-
- if (parent == &clk_f)
- dvs = 0;
- else if (parent == &clk_h)
- dvs = S3C2440_CAMDIVN_DVSEN;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- camdivn = __raw_readl(S3C2440_CAMDIVN);
- camdivn &= ~S3C2440_CAMDIVN_DVSEN;
- camdivn |= dvs;
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2440_setparent_armclk,
- },
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
- struct clk *clock_upll;
- int ret;
-
- printk("S3C244X: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
- clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
- ret = s3c24xx_register_clock(&clk_arm);
- if (ret < 0) {
- printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
- return ret;
- }
-
- clock_upll = clk_get(NULL, "upll");
- if (IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
- return -ENOENT;
- }
-
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- spin_lock(&clocks_lock);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- spin_unlock(&clocks_lock);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
- .name = "s3c2440_clk",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
- return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
- .name = "s3c2442_clk",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
- return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
@@ -67,10 +67,8 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
extern void s3c244x_map_io(void);
extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
#else
-#define s3c244x_init_clocks NULL
#define s3c244x_init_uarts NULL
#endif
@@ -42,24 +42,6 @@
#define S3C2410_CLKCON_IIS (1<<17)
#define S3C2410_CLKCON_SPI (1<<18)
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
#define S3C2410_CLKDIVN_PDIVN (1<<0)
#define S3C2410_CLKDIVN_HDIVN (1<<1)
@@ -457,9 +457,6 @@
/* miscellaneous control */
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84)
/* see clock.h for dclk definitions */
@@ -80,12 +80,6 @@ static struct sleep_save core_save[] = {
#endif /* CONFIG_SAMSUNG_CLOCK */
};
-#ifdef CONFIG_SAMSUNG_CLOCK
-static struct sleep_save misc_save[] = {
- SAVE_ITEM(S3C2410_DCLKCON),
-};
-#endif
-
/* s3c_pm_check_resume_pin
*
* check to see if the pin is configured correctly for sleep mode, and
@@ -143,16 +137,10 @@ void s3c_pm_configure_extint(void)
void s3c_pm_restore_core(void)
{
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-#ifdef CONFIG_SAMSUNG_CLOCK
- s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-#endif
}
void s3c_pm_save_core(void)
{
-#ifdef CONFIG_SAMSUNG_CLOCK
- s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-#endif
s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
}
@@ -83,71 +83,9 @@ void __init s3c2410_map_io(void)
iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
}
-#ifdef CONFIG_SAMSUNG_CLOCK
void __init_or_cpufreq s3c2410_setup_clocks(void)
{
- struct clk *xtal_clk;
- unsigned long tmp;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long pclk;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- /* now we've got our machine bits initialised, work out what
- * clocks we've got */
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
- tmp = __raw_readl(S3C2410_CLKDIVN);
-
- /* work out clock scalings */
-
- hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
- pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brieft summary of clocks, etc */
-
- printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- /* initialise the clocks here, to allow other things like the
- * console to use them
- */
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
- .name = "armclk",
- .parent = &clk_f,
- .id = -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
- s3c24xx_register_baseclocks(xtal);
- s3c2410_setup_clocks();
- s3c2410_baseclk_add();
- s3c24xx_register_clock(&s3c2410_armclk);
- clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
- samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
}
-#else
-void __init_or_cpufreq s3c2410_setup_clocks(void)
-{
-}
-#endif
struct bus_type s3c2410_subsys = {
.name = "s3c2410-core",
@@ -53,118 +53,6 @@
#include "common.h"
-#ifdef CONFIG_SAMSUNG_CLOCK
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- div = parent_rate / rate;
-
- if (div == 3)
- return parent_rate / 3;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div /= 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2442_camif_upll_round(clk, rate);
-
- camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
- if (rate == parent_rate) {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
- } else if ((parent_rate / rate) == 3) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
- } else {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
- .name = "camif",
- .id = -1,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
- .name = "camif-upll",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_rate = s3c2442_camif_upll_setrate,
- .round_rate = s3c2442_camif_upll_round,
- },
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2442_clk_cam.parent = clock_h;
- s3c2442_clk_cam_upll.parent = clock_upll;
-
- s3c24xx_register_clock(&s3c2442_clk_cam);
- s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
- clk_disable(&s3c2442_clk_cam);
-
- return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
- .name = "s3c2442_clk",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
- return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-#endif
-
static struct device s3c2442_dev = {
.bus = &s3c2442_subsys,
};
@@ -78,72 +78,9 @@ void __init s3c244x_map_io(void)
s3c2410_device_dclk.name = "s3c2440-dclk";
}
-#ifdef CONFIG_SAMSUNG_CLOCK
void __init_or_cpufreq s3c244x_setup_clocks(void)
{
- struct clk *xtal_clk;
- unsigned long clkdiv;
- unsigned long camdiv;
- unsigned long xtal;
- unsigned long hclk, fclk, pclk;
- int hdiv = 1;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
-
- /* work out clock scalings */
-
- switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
- case S3C2440_CLKDIVN_HDIVN_1:
- hdiv = 1;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 2;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_4_8:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_3_6:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
- break;
- }
-
- hclk = fclk / hdiv;
- pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brief summary of clocks, etc */
-
- printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
- /* initialise the clocks here, to allow other things like the
- * console to use them, and to add new ones after the initialisation
- */
-
- s3c24xx_register_baseclocks(xtal);
- s3c244x_setup_clocks();
- s3c2410_baseclk_add();
- samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
}
-#else
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
-}
-#endif
/* Since the S3C2442 and S3C2440 share items, put both subsystems here */