@@ -353,38 +353,6 @@ typedef enum {
OMAP_MCBSP_WORD_32,
} omap_mcbsp_word_length;
-typedef enum {
- OMAP_MCBSP_CLK_RISING = 0,
- OMAP_MCBSP_CLK_FALLING,
-} omap_mcbsp_clk_polarity;
-
-typedef enum {
- OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
- OMAP_MCBSP_FS_ACTIVE_LOW,
-} omap_mcbsp_fs_polarity;
-
-typedef enum {
- OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
- OMAP_MCBSP_CLK_STP_MODE_DELAY,
-} omap_mcbsp_clk_stp_mode;
-
-
-/******* SPI specific mode **********/
-typedef enum {
- OMAP_MCBSP_SPI_MASTER = 0,
- OMAP_MCBSP_SPI_SLAVE,
-} omap_mcbsp_spi_mode;
-
-struct omap_mcbsp_spi_cfg {
- omap_mcbsp_spi_mode spi_mode;
- omap_mcbsp_clk_polarity rx_clock_polarity;
- omap_mcbsp_clk_polarity tx_clock_polarity;
- omap_mcbsp_fs_polarity fsx_polarity;
- u8 clk_div;
- omap_mcbsp_clk_stp_mode clk_stp_mode;
- omap_mcbsp_word_length word_length;
-};
-
/* Platform specific configuration */
struct omap_mcbsp_ops {
void (*request)(unsigned int);
@@ -504,14 +472,9 @@ u32 omap_mcbsp_recv_word(unsigned int id);
int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
-
/* McBSP functional clock source changing function */
extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
-/* SPI specific API */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
/* Polled read/write functions */
int omap_mcbsp_pollread(unsigned int id, u16 * buf);
@@ -1175,147 +1175,6 @@ u32 omap_mcbsp_recv_word(unsigned int id)
}
EXPORT_SYMBOL(omap_mcbsp_recv_word);
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
-{
- struct omap_mcbsp *mcbsp;
- omap_mcbsp_word_length tx_word_length;
- omap_mcbsp_word_length rx_word_length;
- u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
- tx_word_length = mcbsp->tx_word_length;
- rx_word_length = mcbsp->rx_word_length;
-
- if (tx_word_length != rx_word_length)
- return -EINVAL;
-
- /* First we wait for the transmitter to be ready */
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- while (!(spcr2 & XRDY)) {
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- if (attempts++ > 1000) {
- /* We must reset the transmitter */
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d transmitter not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* Now we can push the data */
- if (tx_word_length > OMAP_MCBSP_WORD_16)
- MCBSP_WRITE(mcbsp, DXR2, word >> 16);
- MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
-
- /* We wait for the receiver to be ready */
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- while (!(spcr1 & RRDY)) {
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- if (attempts++ > 1000) {
- /* We must reset the receiver */
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d receiver not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* Receiver is ready, let's read the dummy data */
- if (rx_word_length > OMAP_MCBSP_WORD_16)
- word_msb = MCBSP_READ(mcbsp, DRR2);
- word_lsb = MCBSP_READ(mcbsp, DRR1);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
-
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
-{
- struct omap_mcbsp *mcbsp;
- u32 clock_word = 0;
- omap_mcbsp_word_length tx_word_length;
- omap_mcbsp_word_length rx_word_length;
- u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
-
- tx_word_length = mcbsp->tx_word_length;
- rx_word_length = mcbsp->rx_word_length;
-
- if (tx_word_length != rx_word_length)
- return -EINVAL;
-
- /* First we wait for the transmitter to be ready */
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- while (!(spcr2 & XRDY)) {
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- if (attempts++ > 1000) {
- /* We must reset the transmitter */
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d transmitter not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* We first need to enable the bus clock */
- if (tx_word_length > OMAP_MCBSP_WORD_16)
- MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16);
- MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff);
-
- /* We wait for the receiver to be ready */
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- while (!(spcr1 & RRDY)) {
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- if (attempts++ > 1000) {
- /* We must reset the receiver */
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d receiver not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* Receiver is ready, there is something for us */
- if (rx_word_length > OMAP_MCBSP_WORD_16)
- word_msb = MCBSP_READ(mcbsp, DRR2);
- word_lsb = MCBSP_READ(mcbsp, DRR1);
-
- word[0] = (word_lsb | (word_msb << 16));
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
-
/*
* Simple DMA based buffer rx/tx routines.
* Nothing fancy, just a single buffer tx/rx through DMA.
@@ -1450,79 +1309,6 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
/*
- * SPI wrapper.
- * Since SPI setup is much simpler than the generic McBSP one,
- * this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
- * Once this is done, you can call omap_mcbsp_start().
- */
-void omap_mcbsp_set_spi_mode(unsigned int id,
- const struct omap_mcbsp_spi_cfg *spi_cfg)
-{
- struct omap_mcbsp *mcbsp;
- struct omap_mcbsp_reg_cfg mcbsp_cfg;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
-
- /* SPI has only one frame */
- mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
- mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
-
- /* Clock stop mode */
- if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
- mcbsp_cfg.spcr1 |= (1 << 12);
- else
- mcbsp_cfg.spcr1 |= (3 << 11);
-
- /* Set clock parities */
- if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING)
- mcbsp_cfg.pcr0 |= CLKRP;
- else
- mcbsp_cfg.pcr0 &= ~CLKRP;
-
- if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING)
- mcbsp_cfg.pcr0 &= ~CLKXP;
- else
- mcbsp_cfg.pcr0 |= CLKXP;
-
- /* Set SCLKME to 0 and CLKSM to 1 */
- mcbsp_cfg.pcr0 &= ~SCLKME;
- mcbsp_cfg.srgr2 |= CLKSM;
-
- /* Set FSXP */
- if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH)
- mcbsp_cfg.pcr0 &= ~FSXP;
- else
- mcbsp_cfg.pcr0 |= FSXP;
-
- if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
- mcbsp_cfg.pcr0 |= CLKXM;
- mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1);
- mcbsp_cfg.pcr0 |= FSXM;
- mcbsp_cfg.srgr2 &= ~FSGM;
- mcbsp_cfg.xcr2 |= XDATDLY(1);
- mcbsp_cfg.rcr2 |= RDATDLY(1);
- } else {
- mcbsp_cfg.pcr0 &= ~CLKXM;
- mcbsp_cfg.srgr1 |= CLKGDV(1);
- mcbsp_cfg.pcr0 &= ~FSXM;
- mcbsp_cfg.xcr2 &= ~XDATDLY(3);
- mcbsp_cfg.rcr2 &= ~RDATDLY(3);
- }
-
- mcbsp_cfg.xcr2 &= ~XPHASE;
- mcbsp_cfg.rcr2 &= ~RPHASE;
-
- omap_mcbsp_config(id, &mcbsp_cfg);
-}
-EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
-
-/*
* The following functions are only required on an OMAP1-only build.
* mach-omap2/mcbsp.c contains the real functions
*/
We haven't seen any use for the SPI API in McBSP driver over the years. More over, Peter Ujfalusi <peter.ujfalusi@ti.com> noticed that SPI mode is not even supported since OMAP2430 so it's very unlikely that we'll see any use for it in the future either. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> --- arch/arm/plat-omap/include/plat/mcbsp.h | 37 ------ arch/arm/plat-omap/mcbsp.c | 214 ------------------------------- 2 files changed, 0 insertions(+), 251 deletions(-)