diff mbox

[v2,5/5] ARM: mx5: add basic device tree support for imx51 babbage

Message ID 1308938676-31121-6-git-send-email-shawn.guo@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Shawn Guo June 24, 2011, 6:04 p.m. UTC
This patch adds the i.mx51 dt platform with uart and fec support.
It also adds the dts file imx51 babbage, so that we can have a dt
kernel on babbage booting into console with nfs root.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/boot/dts/imx51-babbage.dts |   93 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx5/Kconfig           |    8 +++
 arch/arm/mach-mx5/Makefile          |    1 +
 arch/arm/mach-mx5/imx51-dt.c        |   70 ++++++++++++++++++++++++++
 4 files changed, 172 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx51-babbage.dts
 create mode 100644 arch/arm/mach-mx5/imx51-dt.c
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
new file mode 100644
index 0000000..402cc44
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -0,0 +1,93 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Freescale i.MX51 Babbage";
+	compatible = "fsl,imx51-babbage", "fsl,imx51";
+	interrupt-parent = <&tzic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+	};
+
+	memory {
+		reg = <0x90000000 0x20000000>;
+	};
+
+	tzic: tz-interrupt-controller@e0000000 {
+		compatible = "fsl,imx51-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xe0000000 0x4000>;
+	};
+
+	aips@70000000 { /* aips-1 */
+		compatible = "fsl,aips-bus", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x70000000 0x10000000>;
+		ranges;
+
+		spba {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x70000000 0x40000>;
+			ranges;
+
+			uart2: uart@7000c000 {
+				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+				reg = <0x7000c000 0x4000>;
+				interrupts = <33>;
+				fsl,uart-has-rtscts;
+			};
+		};
+
+		uart0: uart@73fbc000 {
+			compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+			reg = <0x73fbc000 0x4000>;
+			interrupts = <31>;
+			fsl,uart-has-rtscts;
+		};
+
+		uart1: uart@73fc0000 {
+			compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+			reg = <0x73fc0000 0x4000>;
+			interrupts = <32>;
+			fsl,uart-has-rtscts;
+		};
+	};
+
+	aips@80000000 {	/* aips-2 */
+		compatible = "fsl,aips-bus", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x10000000>;
+		ranges;
+
+		fec@83fec000 {
+			compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+			reg = <0x83fec000 0x4000>;
+			interrupts = <87>;
+			phy-mode = "mii";
+		};
+	};
+};
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 799fbc4..8bdd0c4 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -62,6 +62,14 @@  endif # ARCH_MX50_SUPPORTED
 if ARCH_MX51
 comment "i.MX51 machines:"
 
+config MACH_IMX51_DT
+	bool "Support i.MX51 platforms from device tree"
+	select SOC_IMX51
+	select USE_OF
+	help
+	  Include support for Freescale i.MX51 based platforms
+	  using the device tree for discovery
+
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
 	select SOC_IMX51
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0b9338c..47b483f 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -7,6 +7,7 @@  obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
new file mode 100644
index 0000000..8bfdb91
--- /dev/null
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -0,0 +1,70 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/mx51.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate().  Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx-uart.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx-uart.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx-uart.2", NULL),
+	OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "fec.0", NULL),
+	{}
+};
+
+static const struct of_device_id tzic_of_match[] __initconst = {
+	{ .compatible = "fsl,imx51-tzic", },
+	{}
+};
+
+static void __init imx51_dt_init(void)
+{
+	irq_domain_generate_simple(tzic_of_match, MX51_TZIC_BASE_ADDR, 0);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     imx51_auxdata_lookup, NULL);
+}
+
+static void __init imx51_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer imx51_timer = {
+	.init = imx51_timer_init,
+};
+
+static const char *imx51_dt_board_compat[] __initdata = {
+	"fsl,imx51-babbage",
+	NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+	.map_io		= mx51_map_io,
+	.init_early	= imx51_init_early,
+	.init_irq	= mx51_init_irq,
+	.timer		= &imx51_timer,
+	.init_machine	= imx51_dt_init,
+	.dt_compat	= imx51_dt_board_compat,
+MACHINE_END