@@ -48,6 +48,19 @@
#define GPIO_SMART_CARD GPIO_GPIO10
#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10
+/*--- ucb1x00 GPIO ---*/
+#define SIMPAD_UCB1X00_GPIO_BASE (GPIO_MAX + 1)
+#define SIMPAD_UCB1X00_GPIO_PROG1 (SIMPAD_UCB1X00_GPIO_BASE)
+#define SIMPAD_UCB1X00_GPIO_PROG2 (SIMPAD_UCB1X00_GPIO_BASE + 1)
+#define SIMPAD_UCB1X00_GPIO_UP (SIMPAD_UCB1X00_GPIO_BASE + 2)
+#define SIMPAD_UCB1X00_GPIO_DOWN (SIMPAD_UCB1X00_GPIO_BASE + 3)
+#define SIMPAD_UCB1X00_GPIO_LEFT (SIMPAD_UCB1X00_GPIO_BASE + 4)
+#define SIMPAD_UCB1X00_GPIO_RIGHT (SIMPAD_UCB1X00_GPIO_BASE + 5)
+#define SIMPAD_UCB1X00_GPIO_6 (SIMPAD_UCB1X00_GPIO_BASE + 6)
+#define SIMPAD_UCB1X00_GPIO_7 (SIMPAD_UCB1X00_GPIO_BASE + 7)
+#define SIMPAD_UCB1X00_GPIO_HEADSET (SIMPAD_UCB1X00_GPIO_BASE + 8)
+#define SIMPAD_UCB1X00_GPIO_SPEAKER (SIMPAD_UCB1X00_GPIO_BASE + 9)
+
// CS3 Latch is write only, a shadow is necessary
#define CS3BUSTYPE unsigned volatile long
@@ -132,6 +132,7 @@ static struct resource simpad_flash_resources [] = {
static struct mcp_plat_data simpad_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
+ .gpio_base = SIMPAD_UCB1X00_GPIO_BASE,
};
Add ucb1x00 GPIO definitions to simpad.h and add gpio_base to ucb1x00 platform device so the pins are available using the GPIO API. Signed-off-by: Jochen Friedrich <jochen@scram.de> --- arch/arm/mach-sa1100/include/mach/simpad.h | 13 +++++++++++++ arch/arm/mach-sa1100/simpad.c | 1 + 2 files changed, 14 insertions(+), 0 deletions(-)