Message ID | 1310650036-28836-3-git-send-email-ajaykumar.rs@samsung.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hello, On Thursday, July 14, 2011 3:27 PM Ajay Kumar wrote: > This patch adds: > o Framebuffer related register mappings and bit fields. > o IRQ number being used. > > Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> > --- > arch/arm/mach-s5p64x0/include/mach/irqs.h | 4 ++++ > arch/arm/mach-s5p64x0/include/mach/map.h | 3 +++ > arch/arm/mach-s5p64x0/include/mach/regs-fb.h | 19 +++++++++++++++++++ > 3 files changed, 26 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-s5p64x0/include/mach/regs-fb.h > > diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach- > s5p64x0/include/mach/irqs.h > index 513abff..09995b8 100644 > --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h > +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h > @@ -85,6 +85,10 @@ > #define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 > #define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 > > +#define IRQ_LCD_FIFO IRQ_DISPCON0 > +#define IRQ_LCD_VSYNC IRQ_DISPCON1 > +#define IRQ_LCD_SYSTEM IRQ_DISPCON2 > + > /* S5P6450 EINT feature will be added */ > > /* > diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach- > s5p64x0/include/mach/map.h > index 95c9125..c5ef50c 100644 > --- a/arch/arm/mach-s5p64x0/include/mach/map.h > +++ b/arch/arm/mach-s5p64x0/include/mach/map.h > @@ -47,6 +47,8 @@ > > #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) > > +#define S5P64X0_PA_FB 0xEE000000 > + > #define S5P64X0_PA_I2S 0xF2000000 > #define S5P6450_PA_I2S1 0xF2800000 > #define S5P6450_PA_I2S2 0xF2900000 > @@ -64,6 +66,7 @@ > #define S3C_PA_IIC1 S5P6440_PA_IIC1 > #define S3C_PA_RTC S5P64X0_PA_RTC > #define S3C_PA_WDT S5P64X0_PA_WDT > +#define S3C_PA_FB S5P64X0_PA_FB > > #define S5P_PA_CHIPID S5P64X0_PA_CHIPID > #define S5P_PA_SROMC S5P64X0_PA_SROMC > diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-fb.h b/arch/arm/mach- > s5p64x0/include/mach/regs-fb.h > new file mode 100644 > index 0000000..cbb8d8c > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/include/mach/regs-fb.h > @@ -0,0 +1,19 @@ > +/* > + * linux/arch/arm/mach-s5p64x0/include/mach/regs-fb.h > + * > + * Copyright (c) 2011 Samsung Electronics Co., Ltd. > + * http://www.samsung.com/ > + * > + * Framebuffer register definitions for Samsung S5P64X0. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#ifndef __ASM_ARCH_MACH_REGS_FB_H > +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ > + > +#include <plat/regs-fb.h> > + > +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ This patch reminds me, that the arch/arm/mach-*/include/mach/regs-fb.h files should be completely removed. Most of them simply includes the other header from plat-samsung, which can be included directly by the driver. plat-s5pc100/include/mach/regs-fb.h contains some definitions that are not used at all afair, so it can be dropped as well. Best regards
Hi Marek, On Thu, Jul 14, 2011 at 4:47 PM, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > Hello, > > On Thursday, July 14, 2011 3:27 PM Ajay Kumar wrote: > > > This patch adds: > > o Framebuffer related register mappings and bit fields. > > o IRQ number being used. > > > > Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> > > --- > > arch/arm/mach-s5p64x0/include/mach/irqs.h | 4 ++++ > > arch/arm/mach-s5p64x0/include/mach/map.h | 3 +++ > > arch/arm/mach-s5p64x0/include/mach/regs-fb.h | 19 +++++++++++++++++++ > > 3 files changed, 26 insertions(+), 0 deletions(-) > > create mode 100644 arch/arm/mach-s5p64x0/include/mach/regs-fb.h > > > > diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach- > > s5p64x0/include/mach/irqs.h > > index 513abff..09995b8 100644 > > --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h > > +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h > > @@ -85,6 +85,10 @@ > > #define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 > > #define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 > > > > +#define IRQ_LCD_FIFO IRQ_DISPCON0 > > +#define IRQ_LCD_VSYNC IRQ_DISPCON1 > > +#define IRQ_LCD_SYSTEM IRQ_DISPCON2 > > + > > /* S5P6450 EINT feature will be added */ > > > > /* > > diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach- > > s5p64x0/include/mach/map.h > > index 95c9125..c5ef50c 100644 > > --- a/arch/arm/mach-s5p64x0/include/mach/map.h > > +++ b/arch/arm/mach-s5p64x0/include/mach/map.h > > @@ -47,6 +47,8 @@ > > > > #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) > > > > +#define S5P64X0_PA_FB 0xEE000000 > > + > > #define S5P64X0_PA_I2S 0xF2000000 > > #define S5P6450_PA_I2S1 0xF2800000 > > #define S5P6450_PA_I2S2 0xF2900000 > > @@ -64,6 +66,7 @@ > > #define S3C_PA_IIC1 S5P6440_PA_IIC1 > > #define S3C_PA_RTC S5P64X0_PA_RTC > > #define S3C_PA_WDT S5P64X0_PA_WDT > > +#define S3C_PA_FB S5P64X0_PA_FB > > > > #define S5P_PA_CHIPID S5P64X0_PA_CHIPID > > #define S5P_PA_SROMC S5P64X0_PA_SROMC > > diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-fb.h b/arch/arm/mach- > > s5p64x0/include/mach/regs-fb.h > > new file mode 100644 > > index 0000000..cbb8d8c > > --- /dev/null > > +++ b/arch/arm/mach-s5p64x0/include/mach/regs-fb.h > > @@ -0,0 +1,19 @@ > > +/* > > + * linux/arch/arm/mach-s5p64x0/include/mach/regs-fb.h > > + * > > + * Copyright (c) 2011 Samsung Electronics Co., Ltd. > > + * http://www.samsung.com/ > > + * > > + * Framebuffer register definitions for Samsung S5P64X0. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > +*/ > > + > > +#ifndef __ASM_ARCH_MACH_REGS_FB_H > > +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ > > + > > +#include <plat/regs-fb.h> > > + > > +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ > > This patch reminds me, that the arch/arm/mach-*/include/mach/regs-fb.h files > should be > completely removed. Most of them simply includes the other header from > plat-samsung, > which can be included directly by the driver. > plat-s5pc100/include/mach/regs-fb.h contains > some definitions that are not used at all afair, so it can be dropped as well. I consider your point. Soon I will send a consolidating patch for all the boards. Note: Consolidation patch set is based on S5P64X0 patch-set > > Best regards > -- > Marek Szyprowski > Samsung Poland R&D Center > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Ajay Kumar wrote: > > This patch adds: > o Framebuffer related register mappings and bit fields. > o IRQ number being used. > > Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> > --- > arch/arm/mach-s5p64x0/include/mach/irqs.h | 4 ++++ > arch/arm/mach-s5p64x0/include/mach/map.h | 3 +++ > arch/arm/mach-s5p64x0/include/mach/regs-fb.h | 19 +++++++++++++++++++ > 3 files changed, 26 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-s5p64x0/include/mach/regs-fb.h > > diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach- > s5p64x0/include/mach/irqs.h > index 513abff..09995b8 100644 > --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h > +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h > @@ -85,6 +85,10 @@ > #define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 > #define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 > > +#define IRQ_LCD_FIFO IRQ_DISPCON0 > +#define IRQ_LCD_VSYNC IRQ_DISPCON1 > +#define IRQ_LCD_SYSTEM IRQ_DISPCON2 > + > /* S5P6450 EINT feature will be added */ > > /* > diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach- > s5p64x0/include/mach/map.h > index 95c9125..c5ef50c 100644 > --- a/arch/arm/mach-s5p64x0/include/mach/map.h > +++ b/arch/arm/mach-s5p64x0/include/mach/map.h > @@ -47,6 +47,8 @@ > > #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) > > +#define S5P64X0_PA_FB 0xEE000000 > + > #define S5P64X0_PA_I2S 0xF2000000 > #define S5P6450_PA_I2S1 0xF2800000 > #define S5P6450_PA_I2S2 0xF2900000 > @@ -64,6 +66,7 @@ > #define S3C_PA_IIC1 S5P6440_PA_IIC1 > #define S3C_PA_RTC S5P64X0_PA_RTC > #define S3C_PA_WDT S5P64X0_PA_WDT > +#define S3C_PA_FB S5P64X0_PA_FB > > #define S5P_PA_CHIPID S5P64X0_PA_CHIPID > #define S5P_PA_SROMC S5P64X0_PA_SROMC > diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-fb.h b/arch/arm/mach- > s5p64x0/include/mach/regs-fb.h > new file mode 100644 > index 0000000..cbb8d8c > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/include/mach/regs-fb.h > @@ -0,0 +1,19 @@ > +/* > + * linux/arch/arm/mach-s5p64x0/include/mach/regs-fb.h > + * > + * Copyright (c) 2011 Samsung Electronics Co., Ltd. > + * http://www.samsung.com/ > + * > + * Framebuffer register definitions for Samsung S5P64X0. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#ifndef __ASM_ARCH_MACH_REGS_FB_H > +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ > + > +#include <plat/regs-fb.h> > + > +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ > -- > 1.7.1 Since I applied your cleanup mach/regs-fb.h, you have to update this to avoid conflicts. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 513abff..09995b8 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -85,6 +85,10 @@ #define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 #define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 +#define IRQ_LCD_FIFO IRQ_DISPCON0 +#define IRQ_LCD_VSYNC IRQ_DISPCON1 +#define IRQ_LCD_SYSTEM IRQ_DISPCON2 + /* S5P6450 EINT feature will be added */ /* diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index 95c9125..c5ef50c 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -47,6 +47,8 @@ #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +#define S5P64X0_PA_FB 0xEE000000 + #define S5P64X0_PA_I2S 0xF2000000 #define S5P6450_PA_I2S1 0xF2800000 #define S5P6450_PA_I2S2 0xF2900000 @@ -64,6 +66,7 @@ #define S3C_PA_IIC1 S5P6440_PA_IIC1 #define S3C_PA_RTC S5P64X0_PA_RTC #define S3C_PA_WDT S5P64X0_PA_WDT +#define S3C_PA_FB S5P64X0_PA_FB #define S5P_PA_CHIPID S5P64X0_PA_CHIPID #define S5P_PA_SROMC S5P64X0_PA_SROMC diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-fb.h b/arch/arm/mach-s5p64x0/include/mach/regs-fb.h new file mode 100644 index 0000000..cbb8d8c --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/regs-fb.h @@ -0,0 +1,19 @@ +/* + * linux/arch/arm/mach-s5p64x0/include/mach/regs-fb.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Framebuffer register definitions for Samsung S5P64X0. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MACH_REGS_FB_H +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ + +#include <plat/regs-fb.h> + +#endif /* __ASM_ARCH_MACH_REGS_FB_H */
This patch adds: o Framebuffer related register mappings and bit fields. o IRQ number being used. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> --- arch/arm/mach-s5p64x0/include/mach/irqs.h | 4 ++++ arch/arm/mach-s5p64x0/include/mach/map.h | 3 +++ arch/arm/mach-s5p64x0/include/mach/regs-fb.h | 19 +++++++++++++++++++ 3 files changed, 26 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-s5p64x0/include/mach/regs-fb.h