@@ -114,7 +114,7 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev.dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +138,24 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev.dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_warn(&od->pdev.dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev.dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +182,7 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev.dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +205,26 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev.dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_warn(&od->pdev.dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev.dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -245,28 +242,27 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
if (!clk_alias || !clk_name)
return;
- pr_debug("omap_device: %s: Creating %s -> %s\n",
- dev_name(&od->pdev.dev), clk_alias, clk_name);
+ dev_dbg(&od->pdev.dev, "Creating %s -> %s\n", clk_alias, clk_name);
r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
if (!IS_ERR(r)) {
- pr_warning("omap_device: %s: alias %s already exists\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_warn(&od->pdev.dev,
+ "alias %s already exists\n", clk_alias);
clk_put(r);
return;
}
r = omap_clk_get_by_name(clk_name);
if (IS_ERR(r)) {
- pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
- dev_name(&od->pdev.dev), clk_name);
+ dev_err(&od->pdev.dev,
+ "omap_clk_get_by_name for %s failed\n", clk_name);
return;
}
l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
if (!l) {
- pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_err(&od->pdev.dev,
+ "clkdev_alloc for %s failed\n", clk_alias);
return;
}
For consistency in kernel printk output for devices, use dev_dbg(), dev_warn(), dev_err() instead of pr_debug(), pr_warning() and pr_err(), some of which currently use direct access of name from platform_device and others of which use dev_name(). Using the dev_* versions uses the standard device naming from the driver core. Some pr_* prints were not converted with this patch since they are used before the platform_device and struct device are created so neither the dev_* prints or dev_name() is valid. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> --- Unless there are objections, I'll queue this as a fix for the v3.1-rc cycle. arch/arm/plat-omap/omap_device.c | 70 ++++++++++++++++++-------------------- 1 files changed, 33 insertions(+), 37 deletions(-)