| Message ID | 1312472855-15778-1-git-send-email-ben-linux@fluff.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 11 Aug 04, Ben Dooks wrote: > irq_to_gpio() is being called on a GPIO so change to using > gpio_to_irq() instead. > > Signed-off-by: Ben Dooks <ben-linux@fluff.org> cc'ing board maintainer. Acked-by: Amit Kucheria <amit.kucheria@canonical.com> > --- > arch/arm/mach-mx5/board-cpuimx51.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c > index 7c893fa..68934ea 100644 > --- a/arch/arm/mach-mx5/board-cpuimx51.c > +++ b/arch/arm/mach-mx5/board-cpuimx51.c > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { > .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, > }, { > .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), > - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), > + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), > .irqflags = IRQF_TRIGGER_HIGH, > .uartclk = CPUIMX51_QUART_XTAL, > .regshift = CPUIMX51_QUART_REGSHIFT, > -- > 1.7.1 >
On Thu, Aug 04, 2011 at 04:47:35PM +0100, Ben Dooks wrote: > irq_to_gpio() is being called on a GPIO so change to using > gpio_to_irq() instead. > > Signed-off-by: Ben Dooks <ben-linux@fluff.org> Applied, thanks Sascha > --- > arch/arm/mach-mx5/board-cpuimx51.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c > index 7c893fa..68934ea 100644 > --- a/arch/arm/mach-mx5/board-cpuimx51.c > +++ b/arch/arm/mach-mx5/board-cpuimx51.c > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { > .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, > }, { > .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), > - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), > + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), > .irqflags = IRQF_TRIGGER_HIGH, > .uartclk = CPUIMX51_QUART_XTAL, > .regshift = CPUIMX51_QUART_REGSHIFT, > -- > 1.7.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 7c893fa..68934ea 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT,
irq_to_gpio() is being called on a GPIO so change to using gpio_to_irq() instead. Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/mach-mx5/board-cpuimx51.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)