@@ -182,19 +182,21 @@ static struct platform_device __initdata *smdk_devs[] = {
&smdk_led7,
};
+static const struct gpio smdk_led_gpios[] = {
+ { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL },
+ { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
+};
+
void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
-
- s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
+ int ret = gpio_request_array(smdk_led_gpios,
+ ARRAY_SIZE(smdk_led_gpios));
+ if (!WARN_ON(ret < 0))
+ gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
Replace SoC specific GPIO functions with the gpiolib API. The LED gpios are freed right after they are initially configured so they can be acquired in the s3c24xx_led driver. This change is required for converting the s3c24xx_led driver to the gpiolib API. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> --- This change is only compile tested, since I don't have the board. Thus it would be good if someone could test this and provide a Tested-by tag. --- arch/arm/mach-s3c24xx/common-smdk.c | 20 +++++++++++--------- 1 files changed, 11 insertions(+), 9 deletions(-)